Used Machining Center With Edge Banding for sale (72,052)

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Pjdpfjycvcxex Aazjgt

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Pgsdpsz En Axefx Aazjt Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) Pjdpsz A Tx Tefx Aazjgt TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No serial production. Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² Pedszvqclopfx Aazogt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Pedpfxjzzx Hcj Aazogt Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Psdpfx Aezzx H Ajazegt Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Pgjdpfx Aozzx Hieazst Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT Pgjdpfsv I Sayox Aazst PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Pedpfjz En Afjx Aazjgt Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Psdpfez Afctsx Aazjgt Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Weight 900 kg Psdpfszmy N Nox Aazogt

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm MACHINE DETAILS Control system manufacturer: Siemens Podpfxez Apdhs Aazogt

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: Pgodpfx Aoztl Scjazot - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Pgedpez Ea Dzefx Aazot Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support Psdsvwgizjpfx Aazjgt feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Pgodpfxsw Dm Hre Aazot

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Pedpfxezy Sfce Aazogt Weight 850 kg

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Pgodezuwyzspfx Aazot Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: like new (used), functionality: fully functional, Used professional deburring machine Used, professional, and robust deburring machine for the efficient removal of burrs and rounding of edges on metal parts. Suitable for use in workshops and industrial production environments. The machine is equipped with 3 brushes and a powerful 2.2 kW motor. Thanks to its solid construction and weight of approximately 410 kg, the machine is suitable for professional and continuous use. Psdpfsz Ek Evex Aazjgt Technical specifications: Max. material dimensions: 120 × 120 mm Brush diameter: 250 mm Number of brushes: 3 Motor power: 2.2 kW Voltage: 400 V Speed: 1,380 / 2,840 rpm Weight: approx. 410 kg Condition: Used Available immediately. Inspection and testing of the machine are possible by appointment.

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling Psdpfez Enz Ujx Aazegt WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Pgedpfxjz Apdzj Aazot Machine weight: approx. 7,800 kg

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Pgodpfx Aajzafppozot Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Various glue pots for edge banding and squaring edge banding machines. We supply new glue pots or overhaul your used one. We also sell single spare parts. Pgjdpfx Aasf Tc Rqozst Scm, Stefani, Idm, Ima, Biesse

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, Pjdpfx Aasz Hayrezjgt 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Pedpfx Aaozbc Edszjgt Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty