Used Maschinplex Visomat Iv for sale (1,997)

Year of construction: 2015, condition: used, VISOMAT IV The VISOMAT IV is used for visual inspection of ampoules, carpoules, vials, infusion bottles and syringes according to foreign particles in the content as well as defects of the container and the closure. Device was purchased for a new project in a "blue chip" pharma company located in Ireland, but was never comissioned. Equipment is in excellent condition and available for viewing in one of our Cork locations. Device is available for immediate dispatch Fedpfx Apeymyzaswopg

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Fsdpsy E Ey Tofx Apwspg Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ Fpjdeywcr Depfx Apwjg CONDITION used visually in good condition

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: Fsdpfxjywdr Ej Apwepg – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Fpodpfoy Icgiex Apwog Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Fpjdjyutvyepfx Apwjg If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Resonance vibrating screen Screen surface: 1,600 x 3,600 mm with perforated plates Fpedpfx Apstpawlowjg on a heavy, stable base frame new electric drive

Condition: used, This listing is for the Palltronic Flowstar IV The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Fsdpjyfhdmjfx Apwjpg Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows.

Condition: used, loading space length: 103,500 mm, loading space width: 26,000 mm, loading space height: 37,300 mm, Year of construction: 2014, For inquiries about the vehicle, Mr. Seidel will assist you (by phone at r RZK/18 IV refrigerated box with tail lift. Cooling: Carrier Supra 950U, tail lift: BÄR BC 2000S4-C4, BPW axles, permissible total weight: 18,000 kg, unladen weight: 6,980 kg, payload: 11,020 kg, cargo space dimensions: L 6,830 mm x W 2,490 mm x H 2,330 mm, cargo volume: approx. 40 m³, tire tread: 1st axle 5-7 mm, 2nd axle 5-6 mm. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Errors, changes and prior sale excepted! = Further information = Gross vehicle weight (GVW): 18,000 kg. Please contact Tobias Ebert for more information. Fpedeynrhhopfx Apweg

Condition: used, loading space length: 74,400 mm, loading space width: 24,900 mm, loading space height: 22,900 mm, total width: 26,000 mm, total height: 37,300 mm, Year of construction: 2013, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). RZK/18 IV Refrigerated Box Tandem Trailer Fpodpjyfviksfx Apweg Cooling unit: Carrier Supra 950U, Tail lift: BÄR BC 2000S4-C4 (2,000 kg), Through-loading, BPW axles, Wabco ABS, Disc brakes, Spring-loaded brake, Air suspension, Additional spotlights: Left and right sides, rear of vehicle, Permissible total weight: 18,000 kg, Unladen weight: 6,980 kg, Payload: 11,020 kg, Cargo area dimensions: L 7,440 mm x W 2,490 mm x H 2,290 mm, Tire tread: 1st axle 14-15 mm, 2nd axle 6-8 mm Leasing or financing options available upon request. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further Information = GVW: 18,000 kg Please contact Tobias Ebert for more information.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. Fedpey Hi D Ssfx Apwjpg The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, mileage: 366,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Power: 251 kW Emission standard: Euro 6D Vehicle class: M3 First registration: 03/2020 1st German ownership with inspection book Voith automatic transmission 1/2/3/D/N/R Fpedpfx Apoy E D Nmjweg * 28+1 seats * LAWO destination display front/side/rear with control unit * Electric sunblind * Air conditioning * Rear-view camera * Door wing lock * Fold-out ramp * Large multipurpose area - wheelchair / stroller * Convector heating * 2x tilting windows per side installed * Original mileage * Vehicle was labeled - vinyl wrap * Pre-installed TFT screen wiring Note: Vehicle may be registered - mileage and condition may therefore differ The customer is obliged to independently verify the condition and equipment of the goods/vehicle! All information is provided without guarantee Subject to prior sale Please refer to our terms and conditions

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition Fedpfx Apoxuv Udswjpg used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Fsdpfxey Rumye Apwjpg - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Fedpsy Rulvsfx Apwjpg Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm Fodsd Rxw Sjpfx Apwopg cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm Fpodpfx Apefnrw Sowsg disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Fpsdeyt R Idspfx Apwog Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 17,893 h, load capacity: 15,000 kg, lifting height: 1,980 mm, free lift: 1,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,380 mm, power: 122 kW (165.87 HP), fork carriage width: 1,800 mm, fork length: 1,590 mm, empty load weight: 23,000 kg, total length: 3,860 mm, drive type: Diesel, construction width: 1,800 mm, Compact forklift - diesel Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: standard Fjdpfx Aow Hh D Dopwepg Technical condition: very good Front tires type: solid rubber Front tires size: 40x16x30 Rear tires type: solid rubber Rear tires size: 28x12x22 Heater, full cabin, full free lift, CE certificate,

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 213294, workpiece length (max.): 1,000 mm, The Mazak INTEGREX 200-IV T CNC lathe is an advanced 5-axis turning and milling center that combines turning and milling functions in one device, used in the aerospace, automotive and tool manufacturing industries. Fjdpfev R Uv Aox Apwepg The machine is in very good condition; it worked 5 days a week for 8 hours. In recent years, it has been used sporadically. Liquidation of a service plant.

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Machine type: Turn-mill center Control: Mazatrol Matrix Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Fodpfx Aoyxm S Repwspg Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Control circuit: AC 100 V / DC 24 V Max. current: 80 A

Condition: used, maximum load weight: 11,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2013, Equipment: ABS, tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained, affordable vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration, export documents / EUR 1 certificate, and manufacturer's declaration for export. Fpsdpfjyw D Sxex Apwog FINANCING Upon request, we will be happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift inspection / LGS inspection / tachograph calibration / installation of onboard unit (OBU) and service by our authorized workshop in advance. TOLL / ROAD CHARGES Toll registration can be completed on site. TRAVEL / DISTANCES Wittlich train station: 500 m away Frankfurt Airport: 150 km away Frankfurt-Hahn Airport: 40 km away Luxembourg Airport: 75 km away Sale according to our General Terms and Conditions. The information provided online is non-binding and serves as a general description. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 Fpodpoyalpisfx Apwog • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: used, For sale is an agitator motor from YTRON. It is the model Y11.00FC-4/II10-IV. Data on the motor: RPM: 1470 V: 480 Fpjdpfoga Dx Tjx Apwog kW: 11 Connection: DN200 further data see type plate

Condition: used, empty load weight: 5,000 kg, maximum load weight: 12,000 kg, first registration: 07/2016, next inspection (TÜV): 08/2023, total length: 9,200 mm, total width: 25,500 mm, total height: 39,000 mm, suspension: air, tire size: 385 / 55 R 22.5 / 6mm, front tire size: 385 / 55 R 22.5 / 6mm, operation weight: 17,000 kg,