Used Mayrhofer Root Reducer for sale (3,576)

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) Psdpfx Aaszcaqtozogt consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 3000 – Our high-performance cutter head debarker for flexible log processing. Our StoMill 3000 is a versatile cutter head debarking machine for the efficient processing of logs with diameters up to 1,200 mm. Log lengths up to 18 m can be processed by manually feeding them in; an automatic infeed system can be integrated on request. The machine can optionally be equipped with a root reducer, thus enabling debarking and root reduction in a single process. Feeding is carried out using a forklift or crane. A touch display and a 16-channel wireless remote control ensure comfortable operation. The StoMill 3000 is therefore ideally suited for operations with varying requirements for wood preparation. Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: • Cutter head debarker and root reducer in one machine • Patented safety cutter blade shaft • Fully automatic process • Operation via wireless remote control • Low energy consumption Pederk Nk Ejpfx Aazegt Technical data: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW - 45 kW drive power • For all logs with a length of 2 meters or more • Log diameter: 20 – 120 cm Options: • Chip box • Scraper conveyor for chip discharge • Log ejector / log collection tray

Condition: used, We offer a Möhringer root reducer in front of the gate TYPE 312 004 Hydraulic lifting and lowering of the frez Motor 55 kW/63 kW Pgjdpfjy Ecxtox Aazet

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer with radio remote control Psdjn Skz Tepfx Aazogt

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Psdpfx Aoz Agzdoazegt Additional accessories

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good Kronen Salad & root washer and spin dryer, year of construction 2022. Pgodjz D Ig Uopfx Aazjt Maximum load for light vegetables: 2.5 – 3 kg Maximum load for heavy vegetables: 12 – 15 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Double butt end reducer manufactured by Bruks in Sweden. No need to turning logs before operating. Psdpfszy E Dxsx Aazegt Cuts away all root end flares with regard to the diameter of the log. Technical data: Log length: 3.2 m up to 7.5 m Max log diameter: 700 mm Max flare diameter: 980 mm Maximum removal: 200 mm radially capacity: up to 7 logs/min depending on diameter

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Pgodpfxex T Azws Aazet Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: Pedpfx Aasz Ad Stjzegt 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: used, Mayrhofer tensioning device with auxiliary trolley Track gauge: 90 cm Pgjdpfx Ajzx Efmoazst Location: Germany, near Lake Chiemsee

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. Pgodpfx Ajz E A Hxjazjt 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Year of construction: 2012, Ref:11157 . 2012 Aster Universe - Digital folding, gathering and book sewing machine The new sheet-fed solution for fast and versatile digital book production. This automatic folding and book-sewing machine is faster and features automatic set-up that reduces change-over time significantly, making the solution even more versatile. Equipped with: Flat pile feeder (for single sheet) Folding unit Collating unit Sewing unit Thread trimming device Delivery Touchscreen computer Automatic size change Specification: Max. speed 550 A4 sheets/min Sheet size:    Max:  420 x 640 mm / Min: 120 x 200 mm Signature size: Pjdsz Hbvnjpfx Aazogt    Max:  420 x 320 mm / Min: 150 x 100 mm

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018 Podpfxsyf Atvs Aazsgt

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Pedpfsyf A Erjx Aazsgt Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500mm. With its 4 shafts, the machine offers an enormous throughput! Pedpfoyf Arlsx Aazegt Mixing in lime or binding agents to dry the soil, blending with compost, sand, or other soils, etc., while simultaneously breaking up soil clumps. Aerating, shredding, tearing apart, and turning over biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle construction materials such as pumice, bricks, and Poroton blocks, while at the same time separating out fragments (mm); larger, harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.124

Condition: used, functionality: fully functional, year of last overhaul: 2017, total width: 1,300 mm, total length: 7,000 mm, operating pressure: 90 bar, total height: 3,000 mm, number of previous owners: 2, Bruks root reducer / stem reducer – stem lengths up to 6m, 100 m/min feed rate, fully overhauled in 2017. I am offering a powerful and reliable Bruks root reducer, which is ideal for use in log yards and sawmills. The machine underwent a complete overhaul in 2017. The machine was operated in a system with a feed rate of 100 m/min. Price on request. Pgjdozufkzjpfx Aazet

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.124, cutting width 1200 mm. With its 4 shafts, this machine offers outstanding throughput! Equipped with S204 screening shafts, armored in wear zones—resulting in a grain size of 0-25/30 mm, ideal for screening coarse stones from excavated soil, separating stones, branches, roots, turf, etc. Feeding clumped soil into the screening system reduces waste and increases productivity. Mounted with a Volvo L50-120 wheel loader bracket. Pgodpfx Aaoyf Arrezet Price excludes adapter Suitable for excavators from 18 t Suitable for wheel loaders from 10 t Weight (kg): 1850 Throughput: 52 - 77 m³/h Leak oil connection required: 1 Series: TSP.124.100

Year of construction: 1985, condition: used, Mayrhofer tension trailer Year of manufacture: 1985 Track width: 90 cm with auxiliary trailer immediately available – fully functional, but should be inspected/overhauled Location: Austria, near St. Pölten Pedpszl N Eksfx Aazegt

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: Root peeler AE-800, General: The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. • Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is Pgjdpet Av Igefx Aazet straightforward to operate, understand, and manage. • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m Pgjdpfsyyd Tnex Aazot • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Pedjyf Au Hopfx Aazogt Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Psdpoyf Avdsfx Aazogt Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Pgedpfxoyf Atpo Aazet Drain line required: 2 Series: TSC.134.015

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AE-180, General: The root peeler is an advanced device designed specifically for efficiently cleaning and peeling root vegetables such as potatoes, ginger, and carrots. Additionally, by using a soft brush attachment, it can also clean delicate fruits with thin skins. This machine stands out due to its high efficiency, advanced automation, and excellent peeling results. It significantly enhances production efficiency and reduces labor costs by swiftly and effectively removing skins from vegetables. The root peeler employs various peeling techniques, including steam peeling, scrubbing, and brushing. These methods ensure thorough skin removal while maintaining the quality and integrity of the produce. The machine's versatility allows for adjustments in peeling thickness and methods, accommodating different sizes and varieties of vegetables. Key Features: • Efficient Peeling: Equipped with high-speed rotating brushes and impact mechanisms, it ensures rapid and effective skin removal. • Multifunctional Use: Beyond peeling, the machine can clean, grade, and slice vegetables, catering to various processing needs. Adaptability: It easily adapts to different vegetable sizes and varieties, with simple adjustments. • User-Friendly Operation: Featuring automated controls, the machine is straightforward to operate, understand, and manage. • Labor-Saving: The use of this peeler drastically reduces the need for manual labor, boosting overall production efficiency. • Hygienic and Eco-Friendly: Constructed from food-grade 304 stainless steel, the machine meets food hygiene standards, is easy to clean, and environmentally friendly. Regular cleaning and proper handling are necessary to ensure the equipment operates smoothly and safely, minimizing the risk of accidents from improper use. Overall, this root peeler is a robust and versatile solution for the efficient processing of root vegetables and soft-skinned fruits, making it an indispensable tool in any food processing setup. Pgedpfet Av H Asx Aazet

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Fully automatic sequence of the reducing process Pedsztapvspfx Aazjgt Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.