Used Meypack Wrap Around Packer for sale (2,572)

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Bedpjzxuz Dofx Ab Dell

Condition: used, Year of construction: 2006, Overview  Bjdpfx Aew T Sthsb Djll This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment Blodpfezxtyrex Ab Dol - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data - Manufacturer: Kisters Maschinenbau GmbH - Model: Wrap Around Packer 420/50 - Machine Type: Wrap-around packer / secondary packaging machine - Year of Manufacture: 2001 - Capacity: up to approx. 50,000 bottles/hour - Operating Hours: 16,976 h - Application: Packaging of PET one-way bottles - Previous Use: PET one-way beverage line - Current Status: Taken out of operation due to line reconfiguration - Bottle Formats: 0.33 l, 0.355 l, 0.5 l - Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats - Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 - inkl. shrink application for trays  - Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray Bodpey Sidvjfx Ab Djll - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray cluster - 0.33 l LN 4x6 tray cluster - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details - Capacity: up to 60 packs per minute - Recently packed: Blodpfx Abetq Dzho Djl - 3x4 cardboard - 4x6 cardboard - 0,5 L glass bottles - 0,33 L glass bottles - Other formats possible

Condition: used, Year of construction: 2002, 25 Cycles / min Bjdpfx Abjzx Athj Djll

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Blodowbgzdspfx Ab Del Electrical and Mechanical Specifications The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Condition: used, Year of construction: 2013, operating hours: 17,900 h, Used WrapAround Packer BAUMER year 2013 Introduction Within the intricate landscape of bottling technology, the Used WrapAround Packer BAUMER 2013 emerges as a beacon of excellence. Crafted by the renowned manufacturer Baumer, this machine embodies reliability and adaptability, tailored to meet the multifaceted demands of modern production lines. Unrivaled Performance of Packer Baumer Wraparound Blodpfjvgvuljx Ab Del At the heart of its prowess lies an impressive speed of 1500 boxes per hour, a testament to its unwavering commitment to efficiency. This speed not only ensures heightened productivity but also maintains the integrity of packaging with meticulous precision. Accompanied by a repertoire of 10 available formats, the machine seamlessly transitions between diverse container types, offering unparalleled operational flexibility. Prioritizing Safety and Reliability In the dynamic realm of industrial machinery, safety remains paramount. Thus, the Used WrapAround integrates cutting-edge safety features, safeguarding operators in their daily endeavors. Complemented by comprehensive manuals and accessible revisions, it assures optimal functionality and streamlined maintenance protocols, minimizing disruptions to production flow. Strategic Operations Management for Packer Baumer Wraparound In the quest for operational excellence, intelligent management systems play a pivotal role. Fitted with a state-of-the-art Siemens S7 PLC, this machine orchestrates operations with finesse, ensuring reliability and adaptability in equal measure. Moreover, the availability of spare parts mitigates downtime, underscoring its commitment to uninterrupted productivity. Optimal Dimensions for Versatile Deployment Navigating the spatial constraints of modern facilities demands a judicious balance of performance and compactness. The Used WrapAround Packer BAUMER 2013 strikes this balance impeccably, with dimensions meticulously tailored for seamless integration into diverse workspaces. With a length of 11248 mm, a width of 2458 mm, and a height of 2670 mm, it offers adaptability without compromising stability, weighing in at 5300 kg. Culmination: Redefining Bottling Excellence In summation, the Used WrapAround Packer BAUMER 2013 stands as a testament to innovation and precision in the realm of bottling technology. Its amalgamation of unrivaled performance, steadfast reliability, and intuitive adaptability redefines industry standards, offering a compelling solution to elevate production efficiencies. With each operation, it reaffirms its position as a cornerstone of technological advancement in the dynamic world of bottling.

Condition: used, Year of construction: 2008, Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  - Capacity: - 60 packs/minute with 2x5 (10 bottles) Bedowhf S Uepfx Ab Doll - 40 packs/minute with 4x5 (20 bottles) - Packing type: Wrap-around carton box - Carton dimensions: - Length: 120 – 300 mm - Width: 210 – 400 mm - Height: 100 – 350 mm - Formation of packs: 2x5 and 4x5 Scope of Delivery  - Meypack VP 531WA wrap-around packer

Condition: used, Year of construction: 2014, Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially, the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector. Specifically designed to accommodate various container types like cans, glass bottles, and PET bottles, this machine exemplifies efficiency and precision in packaging. Product Types and Scope of Application Notably versatile, the Vanta 2100 bph adeptly adapts to different product sizes and types. It can manage cans, glass, and PET bottles, with diameters ranging from 50 to 110mm and heights from 70 to 370mm. Moreover, its capacity extends to the packaging size, crosswise to the conveyor direction from 140 to 450mm, and forward from 200 to 450mm. Additionally, the range for corrugated board sizes is expansive, horizontally to the conveying direction from 210 to 1500mm, and frontally from 280 to 700mm. Technical Specifications Functionally, the machine operates with a three-phase voltage of 380V and a frequency of 50 Hz. Its power consumption is a modest 13 KW, while control is efficiently maintained at 24VDC. Regarding air usage, it’s a critical aspect, with a consumption of 110L/min at 0.6MPa and 6.7 m3/h. Weighing 7000 Kg, it conforms to noise regulations, maintaining a level within 85 dB. Positioning and Feeding For carton feeding, the setup is straightforward, ensuring a consistent and smooth material flow. This feature is crucial for maintaining efficiency and reducing downtime, assuring that each packaging phase is seamless and uninterrupted. Bodpfsvgt Trjx Ab Doll Conclusionof the Wrap Around Packer Vanta In summary, the Used Automatic Wrap Around Packer Vanta 2100 bph stands as an optimal solution for the packaging of cans, glass, and PET bottles. With advanced technical specifications and the ability to handle diverse product and packaging sizes, this machine offers unmatched value in the bottling industry, blending versatility, efficiency, and precision into one comprehensive tool.

Condition: used, Year of construction: 2003, Used Wrap Around Packer BAUMER EUROPEA 510 Bjdpfx Aevgt Tlob Djll Plexiglass Protection of the Wrap Around Baumer Europea 510 Within the bottling industry, paramount attention is given to operator safety. The Used Wrap Around Baumer Europea 510 with Divider Cosmopack is equipped with plexiglass shields, providing a secure work environment. Moreover, this feature significantly enhances safety conditions, reducing potential hazards.  Electrical System Adhering to CEE Standards The electrical system meticulously adheres to stringent CEE regulations. Consequently, this guarantees the machinery’s reliable and safe operation, in strict alignment with industry standards. Furthermore, this compliance ensures optimal performance and minimizes the risk of electrical malfunctions. Achieving a Remarkable Production Speed of Up to 30 Cartons per Minute An impressive feature of this machinery is its ability to achieve a remarkable production speed. Specifically, it can reach up to 30 cartons per minute. This remarkable speed facilitates a consistently high work rate, promoting efficient production.  Technical Specificationsof the Wrap Around Baumer Europea 510 The correct operation of the machinery necessitates specific electrical power requirements. Specifically, a voltage of 380V at 50Hz, incorporating three-phase, Neutral, and Ground connections, is essential. Additionally, a 24V auxiliary voltage is provided to support the machinery’s component operation. Moreover, these detailed technical specifications guarantee precise power supply and compatibility. Installation Power of 27 Kw Guarantees Reliable Performance An impressive feature of this machinery is its substantial installed power capacity. In fact, it boasts an installed power rating of 27 Kw. This notable power capacity ensures that the machinery can efficiently handle the most demanding workloads. Consequently, this translates into consistently dependable performance. Maintaining Operational Stability with a Dynamic Pressure of 6 Bar To ensure operational stability throughout the bottling process, the machinery maintains a dynamic pressure of 6 bar. This critical feature substantially contributes to high-quality results. Additionally, it promotes a consistent and reliable workflow, minimizing potential disruptions. Tailoring Your Machinery with Customizable Operator Side Configuration The Used Wrap Around Baumer Europea 510 with Divider Cosmopack offers a high degree of flexibility. Specifically, it allows for the configuration of the operator side, which can be positioned either on the right or left. This remarkable feature empowers customers to tailor the machinery to their unique production facility requirements. Consequently, it underscores the machinery’s adaptability and suitability for various operational settings. It is imperative that customers communicate their preferred operator side configuration when making their purchase, as this customization greatly enhances the machinery’s usability and integration into existing workflows.

Condition: used, Year of construction: 2003, Used Baumer Wrap Around Packer 2003 The Baumer wrap around packer is a reliable and efficient piece of packaging equipment that is widely used in various industries. This particular model, the Europea 510, was manufactured in 2003 and has been well-maintained over the years. It is in excellent working condition and is ready to be put to use in your production line. Bledpfx Absvlnvxs Dol Whether you need to pack small items or large ones, this wrap around packer is a versatile and effective solution that can handle a wide range of packaging needs. Its high-quality construction and reliable performance make it a valuable addition to any business looking to improve their packaging efficiency and productivity.

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. Blsdpfevgvy Ijx Ab Dol We carry out an inspection by our staff or through your layout and video/photos of your system.    

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Blsdsywclwspfx Ab Del Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 2012, Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  - type: VP500 - year of manufacture: 2012 - Total output: 20 cycles/min - length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm - packaging data:  - length: 100-300 mm - width: 200-450 mm - height: 60-350 mm - height of tray edging: 40-100 mm Bodpfxsyb Sqvj Ab Dsll - pre-cut: - length: 200-500 mm - width: 290-600 mm - power: 400V,N,PE | 10kW/33A |  - air: 6-7 bar | 20 NL/cycle

Condition: used, Year of construction: 2000, Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour Technical Description of the Used Wrap Around OCME ALTAIR N/50 The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour handles PET and glass containers using high-efficiency wrap-around carton packaging. OCME manufactured this ALTAIR N/50 model in 2000 to support high-capacity bottling lines. As a result, the machine provides a robust and reliable solution for secondary packaging operations. Currently, the machine remains in storage; however, the team has preserved it under controlled conditions to ensure its operational integrity. Furthermore, its compact and modular structure allows manufacturers to install it in both existing and new production layouts. Configuration and Operation The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour uses a straight-line infeed, which consistently guides containers into the carton-forming area. Once bottles enter, the machine folds the carton blank around them and seals it during the same cycle. In particular, its mechanical synchronisation allows the forming, folding, and gluing phases to occur smoothly and efficiently. As a result, the unit maintains high packaging precision. Moreover, technicians can perform format changes quickly, thereby reducing downtime. In addition, the simplified layout improves accessibility for maintenance and adjustment. Because of this, operators can optimize changeovers with minimal training. This machine handles bottle formats of 0.75 L and supports the following carton configurations: 3×2, 3×4, and 3×6. This versatility makes it suitable for various production needs and packaging formats. Performance and Output Capacity The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour processes up to 3300 cartons per hour, regardless of whether it uses the 3×2 or 3×4 format. In the 3×2 configuration, the machine packages 19,800 bottles per hour. In contrast, the 3×4 configuration handles 39,600 bottles per hour, since each carton contains 12 bottles. Thanks to this flexibility, operators can respond quickly to shifts in production demand. In fact, the mechanical setup supports high-speed operation even under heavy workload. Consequently, the machine guarantees steady performance across a wide range of applications. Furthermore, engineers can rely on its repeatability to maintain strict packaging standards. Safety and Compatibility OCME equipped the Used Wrap Around OCME ALTAIR N/50 with integrated safety systems. These include photoelectric barriers, emergency stop buttons, and protective guards in every hazardous area. Therefore, the system complies fully with European safety standards. Moreover, it ensures a safe working environment without compromising productivity. The machine works seamlessly with both PET and glass containers. This compatibility enables production teams to use it across diverse product lines. In addition, it accommodates format switching without recalibrating the entire system. Bljdpowrpnbofx Ab Dsl

Condition: excellent (used), Kliklok Certiwrap C150 is for wrap around sleeves for ready meal trays, tubs and pots, either individually or in a variety of multi-pack configurations Bjdpfoy A Rlijx Ab Djll

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Bledpfey Dgq Djx Ab Dsl

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Bsdpfx Aboyy Sqzj Dell - Capacity: approx. 40 trays/min - Formats: - 24 × 0.5 L cans - 15 × 0.33 L sleek cans - 4 × 6 × 0.33 L bottles - 6 × 4 × 0.33 L bottles - 8 × 3 × 0.33 L bottles - 3 × 6 × 0.5 L bottles - Application: Packaging of cans and bottles - Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery - Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) - Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel - Conveyor system | Gebo | Integrated product transport - Control panel | Siemens | SIMATIC OP17 | Operator interface

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. Bledpfx Ajzvdadjb Dsl If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Automatic Wrap-Around Cartoning Machine CAMA – Stainless Steel Automatic wrap-around cartoning machine CAMA, designed for the automated secondary packaging of products in cardboard boxes, forming the box directly around the product group during a continuous end-of-line process. Manufactured by CAMA, the machine integrates product feeding and grouping operations, cardboard feeding, box forming, folding, and closing, providing an automated solution for high-production industrial lines. The wrap-around system allows the packaging to be formed from a die-cut cardboard blank, wrapping the previously grouped product and creating a box ready for palletizing, storage, and distribution. MAIN FEATURES -Manufacturer: CAMA -Type: Automatic Wrap-Around Cartoning Machine -Application: Secondary packaging -Wrap-Around box forming system -Automatic product feeding -Product grouping and positioning -Automatic cardboard feeding -Box forming around the product -Automatic flap folding -Automatic box sealing system -Continuous industrial operation -Integrated conveying system -Control panel / HMI -Robust industrial construction -Perimeter enclosure with safety guards -Integrable into automated end-of-line systems PROCESS Products from the production line automatically enter the CAMA cartoning machine, where they are organized and grouped according to the configured packaging format. Simultaneously, the machine takes a die-cut cardboard blank and positions it in the forming area. The grouped product is placed on the cardboard, and through various mechanisms, it is folded around the product group. Subsequently, the flaps are closed to create a fully formed wrap-around box with the product inside. It can be integrated with: Filling and closing machines Labeling machines Conveyors Inspection systems Product grouping machines Automatic palletizers Pallet wrapping machines Complete end-of-line systems APPLICATIONS Particularly suitable for the food industry, canning companies, beverage manufacturers, and other packaging plants that require the automation of secondary packaging. Depending on the format and installed configuration, it can work with cans, jars, bottles, trays, packs, and other packaged products, grouping them in different configurations within cardboard boxes. Bodpfx Abozbid Ho Djll CAMA's wrap-around technology provides a compact and automated solution for grouping, forming, and cartoning operations within high-production industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Bodpjh Rykuofx Ab Dell

Condition: used, Year of construction: 2018, Overview  Bedpoy A Nd Dsfx Ab Doll This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Year of construction: 2019, condition: new, Wraparound heat-shinkable Blodpfeih R Icox Ab Dol MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Prize per unit carton

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Bljdjzp H R Eepfx Ab Del Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.