Used Mg 3100 X 16/12 Mm for sale (103,686)

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Hodpexyvx Tefx Afrofh Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Hfsdpfx Aoytr Rmefrsh Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW Hjdpfoyg Eulex Afrsfh CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² Hfsdpfxjxxrhno Afrjh - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: good (used), We offer you here a used pass-through frame of the manufacturer Bito to the purchase. Included in delivery are: 01x pass-through frame, used Manufacturer: Bito material color frame: similar cream white/ sendzimir galvanized material colour rollers: anthracite segment length: approx. 2.700 mm Segment depth: approx. 1,350 mm track spacing: approx. 175 mm Hfsdpfx Aog Nt Uzsfrsh roller width: approx. 25 mm pitch: approx. 26 mm Diameter of rollers: approx. 25 mm Material rollers: plastic Bars per continuous frame: 16 pcs.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: Hedpoidchcsfx Afrofh 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data for pallet racking upright: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet racking upright, used Material colour: grey Frame profile: PLFB 16 Profile dimensions: P 100 x 65 x 2.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss) Height: 8,500 mm Depth: 1,100 mm Your contacts in our company: Hsdpfx Aew Eanrsfrofh Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If delivery or shipping of this item is required, additional costs will apply and can be provided on request depending on the place of delivery and scope of supply.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm Hfodpsidchgsfx Afroh CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: good (used), Technical data of the CS Sigma profile: Hodpfx Aeidcg Aefrofh Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Hfsdpfx Afoza D U Djrjh Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Offer 25350 Technical data: Hodpozaak Isfx Afrjfh - Width approx. 1250 mm - Height approx. 1600 mm - Depth approx. 1000 mm - Plate thickness T – groove side approx. 90 mm - 8 T-grooves, length 1250 mm each - Distance between the centers of the T-grooves: 200 mm each - Distance from the outside edge: 100 mm - T-groove width approx. 35 / 60 mm - T-groove depth approx. 28 / 32 mm - Weight approx. 1400 kg

Condition: excellent (used), Heavy duty wooden pallets with 3 skids accessible from 4 sides length 1680 mm Hodpfx Afjl Uvv Torefh width 1250 mm board thickness 45 mm weight 82,5 kg several available

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer: Bahmüller, thread cutting chuck with keyless chuck -Type: 18.6012 - Bahmüller SK40x36 A 125 -Chuck: Albrecht 1/8-5/8" / 3-16 mm -Dimensions: Ø 63 x 350 mm Hfodpfx Aoxdxb Esfrsh -Weight: 4.4 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø125 x 95 mm Hfodslu N Elepfx Afreh -Item No.: 827 565 65 -Heating power: 1600 W -Voltage: 220 V -Dimensions: 190/150/H95 mm -Weight: 1.1 kg

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Hjdpfjhrnbkjx Afrsfh Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Hfedpfozc Iztsx Afrjh Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm Hodpfoy Tt Twox Afrsfh -Weight: 25 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm Hfsdsy Tt Sgepfx Afreh -Dimensions: 520/490/H400 mm -Weight: 25 kg

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Hfodpfx Afekvm S Noreh Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Hfjdowpku Djpfx Afrjh Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Hsdpfjkvm Szjx Afrsfh Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system Hsdpfx Afsvn S E Nerofh - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Year of construction: 1975, condition: good (used), 13 rolls, Ø 152 mm Hfodpfxog Iii Aj Afrjh strip width: 500 - 2.000 mm strip thickness: max. 12 mm

Condition: new, Hydraulic shear MVD 3100 X 6 mm complete with rear sheet metal pneumatic support Material cutting capacity 450N/mm2 6 mm Material cutting capacity 700N/mm2 4 mm Cutting length 3100 mm Distance between shoulders 3330 mm Fixed cutting angle 1.9 ° Pressing cylinders 14 Hedpofh R Igofx Afrefh Strokes per minute 18- 23 250mm hollow Motor power 10 kw Millimetric square and two sheet metal supports 1000 mm 1000 mm stroke rear register with SHEET TYRE SUPPORT. Approximate weight 6000 kg

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 - 10 complete with pneumatic rear sheet metal support. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC INTERSPACE-BLADE ADJUSTMENT Material cutting capacity 450N/mm2 10 mm Material cutting capacity 700N/mm2 6 mm Cutting length 3100 mm Distance between shoulders 3600 mm Variable cutting angle 0.5 - 3 ° Blade press cylinders 14 Hedpfxofh R Ilj Afrefh Strokes per minute 7 - 13 Hollow 250 mm Motor power 22 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight : 10.5 Ton