Used Miba Boring Machine Can Machining 8000 Mm for sale (103,804)

Condition: good (used), Year of construction: 2017, Manufacturer: MIBA Type: NC-Milling Machine Control: Siemens TOUCH Year of manufacture: 2017 Z Axis 1100 mm X Axis 1310 mm C Axis Endless Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11,500 mm Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 14400 mm Gbedpfewq Hwdsx Aqior Width 12000 mm Height 6000 mm Weight 24000 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details.

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition Gbodpfx Aozc Nt Deqior

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition Gbsdpfx Aqefbt Husisr

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height Godpfowq Hqkox Aqiebr 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: Gbsdpfx Aqevy Tyxeior - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. Godpevy Txzofx Aqiebr - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Gbjdpfx Ajzi Awhjqijr Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Godpozt H Raofx Aqisbr Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Gbjdpfxszmtpvo Aqijr Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm Gbedpfswdta Eox Aqisr w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Gbodsiivg Sspfx Aqior Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Gbsdpfx Aqjc S N Risier Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Gbedpfsc S N Nqsx Aqier Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: used, Year of construction: 1994, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C Gbsdpoztfwxjfx Aqisr z-travel 1400 mm 600 mm ja total power requirement 40 kW weight of the machine ca. 27 t

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm Gjdpfx Aqjf Ncadeijbr 2x machine cutting torches with cutting table (2-part)

Condition: good (used), Year of construction: 1996, Siemens 840-D SL, approximately 2012 Godpfozq Ektox Aqiobr Table: 2200 x 2250 mm Distance between columns: 3000 mm Max. workpiece height: 1200 mm Max. drilling depth: 600 mm Max. deep-hole drilling diameter: 35 mm Spindle speed: 3500 RPM Spindle power: 15 kW

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges Gbsdjw I Rz Hepfx Aqisr • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, A used CNC jig boring machine SIP 640 FANUC control Godpfx Aoy R Nnloqiebr Includes 80 tool holders Disassembly and loading are the responsibility of the buyer.

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (customer has also processed 0.4 mm) Maximum sheet thickness: 3 mm Gedpszphaujfx Aqiobr Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting Godpfxezq Tz To Aqiebr * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Max. Distance Spindle - Table ----- 405 mm Gbsdpfxex N Ndqo Aqisr Spindle Travel ----- 75 mm Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 * Left / Right switch * Spindle guard * Drift key

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz Gbsdjy Saw Hepfx Aqisr - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Year of construction: 1997, condition: used, Can end auto-feeder for unpacking can ends from paper sacks and feeding them to a can seamer. Additional title: can lid feeder Capacity: 4 bags/min Power: 2,0 kW Voltage: 380 V Frequency: 50 Hz Weight: 1500 kg Gbjdsztw Ebepfx Aqior Formats: bag length 400 - 1250 mm

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Gsdpfozp Dn Iex Aqiebr Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, x-travel 2000 mm y-travel 1500 mm z-axis 3000 mm spindle diameter 100 mm table surface area 1.400 x 1.300 mm tool taper MK | dimensions 6,4 x 3,2 x 3,4 m Gedpfx Aezmitdoqiebr weight of the machine ca. 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660