Used Millitec Pcm V100 for sale (157)

Year of construction: 2011, condition: good (used), Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph Rjdpjif Rrlefx Alcjcf

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Rjdpfx Aovtqq Uelcocf

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Rjdpfewzhgnox Alcscf -Manufacturer: PCM, tapping collet -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping pliers 4 pieces -Type: ET1-40 Rcodevv Ufbepfx Alcjf -Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm -Delivery/Price: complete -Transport dimensions: 80/80/H52 mm -Weight: 1.2 kg

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Redovv Up Hjpfx Alcjcf -Manufacturer: PCM, tapping collet -Type: ET1-32 -Size: Ø 10 mm -Delivery/Price: complete -Dimensions: Ø32 x 44 mm -Weight: 0.2 kg

Condition: good (used), Manufacturer: PCM Type: M16C12S Year of manufacture: 01/2017 (used only a little for molasses) Rcsdpfxeztvpfj Alcjf Includes: control cabinet + one piece of hose Offer valid without warranty.

Condition: used, Year of construction: 2011, Manufacturer: PCM Delasco Model: 2Z3 Type: Low-pressure peristaltic pump / Paste pump Year: 2011 Density: 1.8 max Cycle: 165 cm Rcjdpfx Aljx R Dzgscsf Max speed: 56 rpm Max pressure: 1.5 bar Max flow rate: Approx. 9 liters max (calculated estimate) Self-priming Max viscosity: 15,000 cP

Condition: used, Year of construction: 1998, Manufacturer: PCM Delasco Model: JZ237 Type: Low-pressure peristaltic pump / Slurry pump Year: 1998 Maximum pressure: 1.5 bar Maximum flow rate: 300 to 600 liters/hour Rcjdpfx Aljx R Dzmocjf

Condition: used, Year of construction: 2001, Manufacturer : PCM Pompes Model : Moineau MV6l5 Year: 2001 Type : Progressing Cavity Pump Motor : 1,1 kW - 1500 rpm ATEX : EExd IICT4 Volume : 1 - 2 m3/h Pressure : 2 bars Rcodpjx R D H Nofx Alcjf Flow proportional to rotational speed

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Rcsdpfx Alezwu Unjcef

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] Rjdsuhbgwspfx Alcscf - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - Strokes X/Y/Z : 280/280/145 [mm] - Quick movement : 50 [m/min] - Loading zone strokes X/Z : 110/90 [mm] - Tools number : 8 - Motorized tools number : 2 - Rotary tools speed : 6000 [tr/min] - Rotary tools power : 9,5 [kW] - Tools type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Installed power : 2,5 [kW] Rsdpfeuhbfmsx Alcjcf EQUIPMENT - CN Siemens 840D - Axis C - Measuring rules on linear axes - Counter spindle - 1 turning tool holder for counter operation - Coolant tank with pump - Chip conveyor

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Total installed power : 2,5 [kW] Rsdpfx Aouhbf Telcscf EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 Rcodpfx Aouhbftolcsf - Strokes X/Y/Z : 280/280/145 [mm] - Quick movement : 50 [m/min] - Loading zone strokes X/Z : 110/90 [mm] - Tools number : 8 - Motorized tools number : 2 - Rotary tools speed : 6000 [tr/min] - Rotary tools power : 9,5 [kW] - Tools type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C - Measuring rules on linear axes - Counter spindle - 1 turning tool holder for counter operation - Coolant tank with pump - Chip conveyor

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] Rsdpfeuhbgdox Alcjcf - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, Capacity 2800 Watt volume 100 L filter HEPA 230 mbar material INOX Edelstahl Behälter 5000 mm hose diam. 32 mm 5000 mm Rcodpfx Alsf D Tm Dscjf noise 82 dB dimensions LxBxH 50 x 50 x 135 cm weight 35 kg

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Rjdpjxhfkujfx Alcscf Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: used, Technical details: Rcedpfx Aju Idf Eslcof x-travel: 800 mm y-travel: 460 mm z-travel: 620 mm control: YASNAC-J50M table-size: 1100 x 460 mm table load capacity: 800 kg tool taper: BT40 Revolution per minute: 30 - 10 000 U/min. spindle head: MAS / BT 40 distance spindle nose and table: 150 mm feed speeds infinitely variable: 8 m/min. rapid traverse:: x+y+z: 30+30+24 m/min tool changer with: 24 spindle hours: 1317 h operating hours - idle run: 7148 h air-pressure connection: ja bar total power requirement: 30 (kVA) Weight approx.: 5,0 t dimension machine xH: 2,9 x 2,5 x 2,85 m dimension swarf conveyor LxWxH: 3,0 x 0,9 x 1,3 m other technical characteristics: max. drill Ø 40mm Facing 245 cc/min (cc/min) Thread cutting up to M 36 Compressed air connection Equipment: Chip conveyor with cooling water tank Interior lighting Operation via swivelling control panel CTS Machine feet Accessories: approx. 26 clamping spigots *

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm stroke 70 mm work stroke 10 mm table surface area 220x190 mm Rcedpfx Alsy Umf Ascjf throat 150 mm weight of the machine ca. 350 kg

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 053-497, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Center Rsdpfx Aljyt I I Uscjcf Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (Special Machine) Year of manufacture: 2005 Serial number: 053-497 CNC special machining center of type HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module featuring both horizontal and vertical machining capabilities, and is equipped with an automatic pallet changer. It was specifically developed for processing rolling bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with clamping fixture is swiveled from the loading position to the machining position. Loading is performed by an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally provided. The system comes with extensive peripherals, including a coolant system with high-pressure unit, chip conveyor, hydraulic power unit, recooling system, centralized lubrication, as well as oil and emulsion mist extraction. The machine is controlled via Siemens SINUMERIK 840D. Used industrial special machine from a production environment. The system is fully assembled and equipped with comprehensive peripherals. Cosmetically in line with age and previous use, showing the usual wear in the working area. Inspection of the machine possible by appointment. Dismantling, loading, and transport to be carried out by the buyer. Machine Specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machining performance: approx. 1 workpiece/hour (depending on type) Machining Details • Workpieces: various rolling bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Type: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Controls and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical Data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air requirement: approx. 300 m³/h Centralized Lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication cycle: every 10 min • Tank volume: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration unit: K90 L T63-PF750D-T-ND-SSP • Flow rate: 500 l/min at 4.4 bar (10 µm filter) High-Pressure Unit • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Flow rate: 50 l/min • Pump: ALLWEILER Chip Removal • Scraper belt conveyor with pump unit • Conveyor capacity: 550 l/min at 1.3 bar Extraction • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Power: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PCM 200, total length: 1,650 mm, total width: 800 mm, total height: 1,900 mm, warranty duration: 12 months, type of input current: three-phase, power: 225 kW (305.91 HP), Hot air Pork crackling machine Here is the introduction of our pork crackling machine, as follows: Rcedpfjy Ex Eiex Alcjf Our pork crackling machine is produced from high quality AISI 304 stainless steel. The machine consists of stainless steel body, including inner drum with holes, which allow moderate distribution of hot air and even baking of the product. The operator may choose the time and frequency of the drum rotation with the help of the Frequency regulator and the German company Aditec control. The drum rotation can be according to the product types and time frequency control of the motor speed. The machine is wrapped with insulation, which fully ensure the safety of the operation of the workers, prevent burns. Our Pork crackling machine save manpower, reduce production cost, has easy paddle discharge system, perfect heating system, reliable electric control system, etc. This pork crackling machine is a new type of energy-saving equipment that our company has developed for the characteristics of this type of the products. This is our pork crackling machine introduction, if you want to know more information about the pork crackling machine, feel free to contact with me.

Condition: like new (used), functionality: fully functional, In this offer you purchase a used colour production system "Canon imagePRESS V1000 ’ from 12.2023 Object of sale: 1 x Canon imagePRESS V1000 with the following equipment: 5212c003 - Canon Fixing Station V1000 5948c003 - Canon Resale Licence 5222c003 - Canon Booklet Finisher AF1 5214c003 - Canon Multi-Drwaer Paper Deck E1 5936c001 - Canon PrismaSync 5606c001 - Canon Duplex Colour Image Reader P1 5261c001 - Canon Operator Attention Light A1 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,686,664 pages Condition: This offer is for a used device which is in mint condition. The device has been fully tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Rcjdpsu Tqnujfx Alcsf A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Tank capacity (litres) Rjdovpfhyepfx Alcscf 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan Rjdpfx Asyc H I Sslcjcf • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), For sale: Busch WV 1000 B 001 KDXX vacuum pump – a high-quality industrial device from the renowned brand Busch (Switzerland). The pump is designed for industrial applications where reliable operation and stable vacuum are required. ⚙️ Technical data: Manufacturer: Busch Model: WV 1000 B 001 KDXX Country of manufacture: Switzerland Rjdpfx Aoyz Dw Aolcecf Motor power: 3.0 kW Power supply: 230/400 V (three-phase) Frequency: 50 Hz Speed: 2890 rpm Protection rating: IP55 Oil: ISO VG 100 🛠️ Features: Professional vacuum pump for industrial applications Robust, durable construction Integrated oil filter/separator High performance and reliability Ideal for continuous duty 📦 Condition: Used item. Good visual condition – visible storage marks (cardboard, minor scratches). Oil visible in the system – pump has been preserved. 📌 Applications: manufacturing industry vacuum packaging automation and production lines CNC and suction systems 📦 Included: Busch WV 1000 B pump as shown in the photos 🚚 Shipping: Shipping available via courier or on a pallet.