Used Mining Winches for sale (1,596)

Condition: ready for operation (used), Year of construction: 2000, Two used mining winches are offered in very good condition, fully functional. 1. Hydraulic winch type 5101 Defries, serial no. 11617105, pulling force 20 kN, year 1985 (conversion 2010), weight 1,200 kg Nsdpfsyznciox Aazelg 2. Planeta, type SB306-E-SP, serial no. 2002968, pulling force 50 kN, year 2000, weight: 1,128 kg (cabinet 164 kg).

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Nodpfx Aajz Dxcmezslg Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Year of construction: 2019, condition: used, functionality: unexamined, Montanari Traction Winch for Elevator (Gearbox & Motor) - Year 2019 Selling a used elevator traction unit from the Italian brand Montanari Giulio & C. Composition of the unit: 1. Speed Reducer (Winch) o Model: M93 B9/1 o Reduction ratio: 1/39 o Serial number: 496692 o Year of manufacture: 2019 o Lubrication: Uses synthetic oil. o Equipped with a large 5-groove traction sheave 2. Electric Motor o Brand: Montanari o Type: MPV160L.40 (Three-phase asynchronous motor) o Power: 13 / 13.25 kW o Frequency: 50 Hz o Speed: 1380 / 315 rpm o Voltage: 230 / 400 V o Insulation class: F 3. Electromagnetic Brake o Model: EM500 o Voltage: 48V D.C. o Current: 2.7 A o Connection type: Parallel connection. o Equipped with a red manual release lever Key Features: • Leading brand in the elevator industry. • Recent year of manufacture (2019). Nljdpfxoy U I R Hj Aazjg • Complete unit, ready for installation. • Traction sheave in excellent condition. The equipment is sold as is. Price: €2000 For more information or to arrange a visit, please contact me by message or WhatsApp.

Condition: new, power: 349 kW (474.51 HP), tire size: 13R22.5, axle configuration: 6x6, wheelbase: 3,800 mm, fuel tank capacity: 390 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2026, - 1 fuel tank IVECO T-WAY AT720T47WT H 6x6 Tractor | 470 CV | EURO III | 33T GVW The IVECO T-Way AT720T47WT H 6x6 Tractor is for sale and provides a heavy-duty all-wheel-drive platform for demanding transport, construction, infrastructure, industrial and remote-site operations. Powered by the C13 diesel engine producing 470 CV, this IVECO T-Way combines strong engine performance with a genuine three-axle 6x6 drivetrain and a professional tractor configuration. The vehicle is equipped with the 16TX 2240 TO transmission, mechanical suspension, a 3,800 mm wheelbase and a gross vehicle weight of 33,000 kg. Its 6x6 axle configuration makes the IVECO T-Way particularly relevant for transport operations where conventional road driving is combined with gravel roads, unpaved access routes, construction sites, industrial areas and other demanding working environments. A JOST fifth wheel, 3½" fifth-wheel configuration, 16 mm mounting plate and 15-pin trailer connection prepare the truck for professional semi-trailer operation. The Active Time cab provides a practical working environment with an air-suspended driver's seat, manual air conditioning, cruise control, Hill Holder, one bunk, external sun visor and Bluetooth DAB radio. For international operators searching for an IVECO T-Way 6x6 for sale, EURO III heavy-duty tractor, 6x6 off-road tractor or professional truck tractor for demanding transport, this configuration provides a strong combination of traction, mechanical durability and commercial transport capability. QUICK HIGHLIGHTS Key specifications of the IVECO T-Way AT720T47WT H 6x6 EURO III Tractor. - IVECO T-Way AT720T47WT H - SGT6 - Heavy-Duty Tractor Unit - Genuine 6x6 All-Wheel Drive - C13 Diesel Engine - 470 CV - EURO III Emission Standard - 33,000 kg Gross Vehicle Weight - 16TX 2240 TO Transmission - 3,800 mm Wheelbase - HR-TP Rear Axle - Rear Axle Ratio 4.67 - Mechanical Suspension - Front Parabolic Suspension - Rear Multileaf Suspension - 13R22.5 Tyres - Twin Rear Wheels - Drum Brakes Front & Rear - EBS + BAS - JOST Fifth Wheel - 3½" Fifth Wheel - 16 mm Fifth-Wheel Mounting Plate - 390-Litre Fuel Tank - Steel Front Bumper - Radiator Guard - Horizontal Air Filter - Active Time Cab - Low Roof - Air-Suspended Driver's Seat - Manual Air Conditioning Njdpfozp Nwujx Aazolg - Cruise Control - Hill Holder - 1 Bunk - External Sun Visor - Bluetooth DAB Radio - Left-Hand Drive - 15-Pin Trailer Plug - 85 km/h Speed Limiter - Without Urea Tank - Worldwide Export Available HEAVY-DUTY IVECO T-WAY 6x6 TRACTOR A professional 6x6 tractor must combine road transport capability with additional traction when operating conditions become more difficult. The IVECO T-Way AT720T47WT H is configured as a three-axle 6x6 tractor, giving the vehicle all-wheel-drive capability across all three axles. This drivetrain configuration provides an important advantage for operators whose routes do not remain exclusively on paved roads. Construction projects, infrastructure developments, mining sites, energy projects and industrial operations may require a tractor to leave the main road and continue across gravel, loose surfaces or unpaved access routes. A conventional road tractor can be highly...

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area Njdpfjzt Sw Sjx Aazolg • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: used, functionality: fully functional, machine/vehicle number: YV2XS50G6GB787706, mileage: 82,358 km, power: 382.46 kW (520.00 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 23,000 kg, maximum load weight: 40,000 kg, overall weight: 63,000 kg, tire size: 650/65 R25, tire condition: 20 %, wheelbase: 5,900 mm, fuel: diesel, fuel tank capacity: 405 l, emission class: euro3, number of seats: 2, total length: 10,900 mm, total width: 2,900 mm, total height: 4,080 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,400 kg, loading space volume: 33.3 m³, loading space length: 6,700 mm, loading space width: 2,600 mm, loading space height: 1,960 mm, Year of construction: 2018, operating hours: 9,861 h, We are offering this used Volvo FMX 520 Push truck, manufactured in 2018. We have 3 of the same model in stock. If you have any questions or would like more information, please feel free to send us a message or call us. Nedpfx Aey Uhyusazslg

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Nledoz Aibaopfx Aazjg Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Njdjylnybopfx Aazolg Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: good (used), Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch without crane control -Cable pull: Type T510 S -Load capacity: 2000 kg -Roller spacing: 300 mm / max 355 mm, dimensions see photos -Main stroke/fine stroke: m/min Nlsdpjzkq Tasfx Aazjg -Hook path: 6.0 m -Drive system: Type W 12 20 -Travel speed: 20 m/min -Transport dimensions: 1110/700/H530 mm -Weight: 188 kg

Condition: used, functionality: fully functional, machine/vehicle number: YV2XS50G8KB882504, mileage: 95,085 km, power: 382.46 kW (520.00 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 23,000 kg, maximum load weight: 40,000 kg, overall weight: 63,000 kg, tire size: 650/65 R25, tire condition: 20 %, wheelbase: 5,900 mm, fuel: diesel, fuel tank capacity: 405 l, emission class: euro3, number of seats: 2, total length: 10,900 mm, total width: 2,900 mm, total height: 4,080 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,400 kg, loading space volume: 33.3 m³, loading space length: 6,700 mm, loading space width: 2,600 mm, loading space height: 1,960 mm, Year of construction: 2018, operating hours: 10,072 h, We are offering this used Volvo FMX 520 Push truck, manufactured in 2018. Nodpfoy Ui Dhox Aazelg We have 3 of the same model in stock. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Year of construction: 2025, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation WHEN THE EQUIPMENT CANNOT COME TO THE WORKSHOP, BRING THE WORKSHOP TO THE EQUIPMENT Downtime costs money. And when machinery is operating on a remote construction site, inside a mine or hundreds of kilometres from the nearest workshop, even routine maintenance can become a logistical operation. That is exactly where the Mercedes-Benz Atego 1725A 4x4 Mobile Workshop Truck comes into its own. It combines the mobility of a Mercedes-Benz 4x4 chassis with lubrication equipment, fluid storage, compressed air, cleaning equipment, independent electrical power, welding equipment and professional workshop tools. One vehicle engineered to bring essential maintenance capability directly to the fleet. WHY CHOOSE THIS ATEGO 1725A MOBILE WORKSHOP? ✔ Mercedes-Benz Atego 1725A 4x4 ✔ 245 HP EURO 3 Engine ✔ Front & Rear Differential Locks ✔ Manual Mercedes-Benz Drivetrain ✔ Factory PTO ✔ Complete Mobile Workshop Body ✔ Four Pneumatic Oil Systems ✔ Waste-Oil Collection System ✔ Grease Dispensing System ✔ 1,000-Litre Diesel Service Tank ✔ 900-Litre Waste-Oil Tank ✔ 600-Litre Water Tank ✔ High-Pressure Cleaner ✔ Integrated Air Compressor ✔ Independent Power Generator ✔ MMA & TIG Welding Equipment ✔ Professional Workshop Tools ✔ Workbench & Storage Cabinets ✔ 4x4 Mobility for Remote Projects ✔ Ready for Worldwide Export 4x4 Mobility – Because Maintenance Does Not Always Happen on the Road The machines that need servicing are not always parked next to a workshop. Excavators, loaders, trucks, generators and construction equipment may be working on unpaved roads, remote project sites or industrial locations where conventional service vehicles struggle to reach them. The Mercedes-Benz Atego 1725A combines 4x4 drive with differential locks on both the front and rear axle. Nodpey Ruczefx Aazslg Its 245 HP Mercedes-Benz six-cylinder diesel engine delivers the power, while the G 85-6 manual transmission and VG550 transfer case provide the drivetrain configuration required for demanding field operations. The mobile workshop starts with the ability to get to the job. A Lubrication Station on Wheels Routine lubrication is one of the foundations of preventive maintenance. This mobile workshop carries four pneumatic oil pumps, each equipped with a hose reel, dispenser gun and digital meter. Different lubricants can therefore be carried and dispensed from dedicated systems without continually changing equipment. A separate pneumatic grease pump with a 12-metre hose reel supports greasing operations, while a dedicated waste-oil pump and collection system allow used fluids to be removed during servicing. The workshop also incorporates a 900-litre waste-oil tank. Everything required to support regular fleet lubrication from one mobile platform. 1,000 Litres of Mobile Diesel Support Remote equipment also needs fuel. The integrated 1,000-litre diesel tank is equipped with its own 24V pump, 15-metre hose reel, dispenser gun and digital flow meter. This allows the mobile workshop to provide fuel support to equipment in the field while carrying out maintenance activities. For fleets operating across large sites or remote projects, combining maintenance and...

Year of construction: 2022, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Weights Empty weight: 480 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Nljdpfxsxf Eawo Aazeg Other information Delivery terms: EXW Working pressure: 250 bar Cutting power: 250 kN Required hydraulic flow: 40 l/min Production country: IT Additional information Please contact Sales Department Collé Sittard for more information

Year of construction: 2022, condition: used, General information New: Yes Field of application: Construction Drivetrain Make of engine: Magni Weights Empty weight: 500 kg Nedpfsxg A Tkjx Aazolg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,1 Working pressure: 250 bar Cutting power: 250 kN Required hydraulic flow: 60 l/min Production country: IT Additional information Please contact Sales Department Collé Sittard for more information

Condition: used, mileage: 86,335 km, power: 118 kW (160.44 HP), first registration: 05/2021, fuel type: diesel, tire size: 225/65R16c, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, Year of construction: 2021, = Further Information = Front axle: Tyre size: 225/65R16C; Steered; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle: Twin tyres Unladen weight: 2,447 kg Nodpfszgm Dtox Aazolg Payload: 1,053 kg Gross vehicle weight: 3,500 kg Damages: none

Condition: not inspected (used), functionality: unexamined, Year of construction: 1996, machine/vehicle number: 54 10 544, load capacity: 6,300 kg, power: 7.8 kW (10.61 HP), main lifting speed: 41 mm/min, 2x Stahl winch, 6,300 kg capacity Njdpfx Aajzun Rqezelg price per unit

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Magni Winch / W 6 I / 6 tonnes / suitable for RTH, TH & HTH 10.10 series / NEW Price: €11,990.00 net / €14,268.10 gross - Max. lifting capacity: 6,000 kg - Working cable length: 27 m - Cable diameter: 12 mm - Cable lowering speed: 19 m/min - Automatic attachment recognition: yes - Winch with homologated, swiveling load hook - Pressure roller and hydraulic end-stop for cable winding/unwinding - Includes metal transport frame This attachment is suitable for the RTH, HTH 10.10, and TH series. Product code: ATT-02-004 We have many other Magni attachments in stock and immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are pleased to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! = More information = Nledpfeykht Eox Aazjg New: Yes Application: Construction Please contact Marius Herden for further details.

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Nledpfeymdpuex Aazog Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Nedsr E Ht Hepfx Aazelg Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. Magni Jib with Winch JW2000 / 2 Tonnes / Suitable for RTH & TH Series / NEW Price: €9,490.00 net / €11,293.10 gross - Max. lifting capacity: 2,000 kg - Length: 2,390 mm - Cable diameter: 10 mm - Working cable length: 25,000 mm - Cable lowering speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom jib with integrated winch - Lattice boom construction made of tubular sections for optimal weight/performance ratio - Winch with pressure roller and hydraulic end-of-travel switch for safe cable winding/unwinding Nsdpeykht Ssfx Aazslg This attachment is suitable for RTH and TH series. Product code: ATT-04-015 We have many more Magni attachments in stock for immediate delivery! Mr. Herden (phone) will be pleased to assist you. We are happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! = More information = New: Yes Application: Construction Contact Marius Herden for further information.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 48,000 kg, Year of construction: 2026, The Omega TMC Q250 is a heavy-duty tracked cone crusher engineered for high-capacity secondary and tertiary crushing applications. Designed for demanding quarrying, mining and recycling environments, the Q250 combines a robust cone crushing unit with tracked mobility and an integrated feed and discharge system to deliver dependable production in tough working conditions. Nlsdpfx Ajz Dbg Isazog With an operating weight of approximately 48,000 kg, the Q250 is built around a substantial tracked chassis for stability and durability. In its working configuration, the machine measures approximately 17.8 m in overall length, with the detailed GA drawing showing a maximum overall width of approximately 4.8 m and height of approximately 4.76 m. The integrated tracked design allows the Omega TMC Q250 to be moved easily around the quarry or job site, while its large feed arrangement, cone crusher and product conveyor provide a complete mobile crushing solution.

Condition: used, mileage: 140,315 km, power: 338 kW (459.55 HP), fuel type: diesel, tire size: 375/90R22.5, axle configuration: 10x4, wheelbase: 5,600 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: other, total length: 10,100 mm, total width: 2,800 mm, total height: 3,900 mm, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, power assisted steering, traction control, = Additional Options and Accessories = - Electric power steering - Lift axle - Hub reduction - Radio - Reversing camera - Sun visor - Central lubrication system = Notes = Hub reduction. Steel suspension. Third axle on air suspension / liftable. Dynamic steering Tipper: Hardox steel 450 30 m3 Payload: 50,000 kg = Further Information = Technical Information Number of cylinders: 6 Nljdpfxjzn Hhbe Aazog Axle Configuration Brakes: Drum brakes Front axle 1: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Front axle 2: Tire size: 375/90R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Mid axle: Tire size: 375/90R22.5; Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Air suspension Rear axle 1: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Rear axle 2: Tire size: 12.00R24; Dual tires; Tire tread depth left inside: 15%; Tire tread depth left outside: 15%; Tire tread depth right inside: 15%; Tire tread depth right outside: 15%; Suspension: Leaf spring suspension Weights Unladen weight: 24,000 kg Payload: 50,000 kg GVW: 74,000 kg Financial Information Price: On request Identification Model number: FMX 460 10x4 TIPPER / MINING = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 Nlsdpfx Aaeq Tvpxszjg -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Year of construction: 2008, condition: used, machine/vehicle number: 0705012, load capacity 10,000 kg Nljdpoiqhi Tsfx Aazog rope diameter 22 mm x 150 metres length according to information included in the documentation operating pressure 55 bar up to 80 bar maximum flow volume 19 litres / minute up to 272 litres / minute maximum hydraulic motor Rexroth hydraulic control block with mounting underframe documentation and inspection log book available The rope winch has been used on a test stand / test tower. space requirements length - 2,100 x depth - 1,400 x height - 1,300 mm complete with control block weight approx. 1,500 kg  

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: Njdpfx Aoq Igiisazslg - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: as good as new (ex-display), Horstmann SEW Elevator Cable Winch RA2467 Technical data: Frame dimensions: 1380x100x600 mm (HxLxW) Winch diameter: Ø = 450 mm (1420 mm circumference) Steel rope thickness: 10 mm Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 7.5 S1 Rope length: 14200 mm (14.2 m) Speed (v m/s): 0.54 Pulling force: 11600 N /1160 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Nodjyi Im Nopfx Aazslg With kind regards Your team at Dr. Sonntag GmbH & Co. KG