Used Motorized Shear In Div. Lengths for sale (55,164)

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Kljdpfx Ajgu N E Degnjt Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Year of construction: 2024, condition: new, *image similar* Technical data sheet length: 2.050 mm sheet thickness : 3 mm Klsdpfohk Ngcjx Agnot Total power requirement : 3 kW Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Year of construction: 2024, condition: new, Motorized guillotine shears Kjdpfjhk Nf Rsx Agnelt Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm width: 1350mm length: 3100mm Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm stand width - table width: 400 mm Kedpfx Ashk Nfuegnjlt working height: 850 mm Control: conventional

Condition: good (used), Year of construction: 1990, machine/vehicle number: 63/4, Offer 26093 Technical Data: Kjdpjyzpbmsfx Agnslt - Max. cutting length: 3050 mm - Max. material thickness at 40 kg/mm² strength: 2.5 mm - Cutting gap adjustment - Cutting angle: 1°35′ - Strokes: 50 1/min - Frame throat: 100 mm - Table height: approx. 750 mm - Front angular stop: 850 mm - 2 support arms: 500 mm - Manually operated backgauge accessible from front: 5 – 750 mm - Pneumatic sheet support - Electric foot switch - Drive: 400 V / 5.5 kW - Required space: approx. W 3800 x H 1500 x D 1400 mm - Weight: approx. 2900 kg

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Ksdpfx Asfifbbegnelt immediately available ex works Freight costs on request

Year of construction: 2026, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping Kljdefv T Nmopfx Agnst • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: Klsdpfxjfv T Dwo Agnet -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, AUTOPOS – Motorized Length Stop for Precise Positioning The motorized length stop AUTOPOS is designed for material weights of up to 150 kg/m, making it ideal for use with profiles and solid materials made of aluminum. Especially suitable for aluminum processing, with a roller width of 300 mm, for use with crosscut saws and under-table saws. Product features: ✔ Plastic roller diameter: Ø40 mm ✔ Roller width: 300 mm Klsdpopa Nzkefx Agnjt ✔ Load capacity up to 70 kg/m ✔ Height adjustable from 800 to 1050 mm ✔ Measuring accuracy: 0.1 mm ✔ Program with 20 memory slots for jobs ✔ Motor power: 0.16 HP ✔ Automatic positioning with max. speed of 18 m/min ✔ Slow movement at 0.6 m/min Available variants: AUTOPOS-3 – Measuring length 3000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-4 – Measuring length 4000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-6 – Measuring length 6000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-8 – Measuring length 8000 mm, available on request Perfect for precise aluminum processing with high repeat accuracy and user-friendly operation. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Kledpfev H Hfnjx Agnjt

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Kjdpfx Agsu Rimmenjlt Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Klodsxx D Efopfx Agnjt Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm Kodpfx Aex S Ed Eognslt - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar Kledpfxstpnldo Agnot - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: N 74-1057, Offer 24454 Technical data: - max. cutting width 2520 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - throat depth 200 mm - Stroke rate up to 30 /min - front angle fence 1100 mm - front support arm 400 mm - mot. back gauge 5 - 600 mm - cutting line lighting - Sheet support - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm Ksdpfxouzvpcj Agnolt - Weight approx. 3.8 t

Condition: good (used), Year of construction: 2006, machine/vehicle number: 313406334, Offer 24236 Technical specifications: - Max. working width 2550 mm - Max. cutting capacity St 40 4.0 mm - Cutting angle 1.30° - Position-controlled backgauge 20 - 750 mm - Front angle stop + support arms - Electric foot switch - Stroke rate up to 34 per minute depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including backgauge, without front support arms - Approx. W 3250 x H 1250 x D 2000 mm Kodpowd Nu Ssfx Agnjlt - Weight approx. 3500 kg

Condition: used, functionality: unexamined, Ferwood code: RU0011670 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 280KG - 940X91X30 Kjdpfxeya Dchs Agnelt

Condition: new, sheet length: 2060sheet thickness: 4messurements (LxWxH): 2700 x 2250 x 1400motor: 7,5weight approx.: 3000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination Kledpfegickrsx Agnst 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 2560sheet thickness: 4messurements (LxWxH): 3200 x 2250 x 1400motor: 7,5weight approx.: 3500Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Kedpfx Agjgickvenelt Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1560sheet thickness: 5messurements (LxWxH): 2250 x 2250 x 1400weight approx.: 2500motor: 7,5Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ksdpfxogicknj Agnslt Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 3060sheet thickness: 4messurements (LxWxH): 3700 x 2250 x 1400motor: 11weight approx.: 4000Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Kedpfjgickyjx Agnslt Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1360sheet thickness: 6messurements (LxWxH): 2050 x 2250 x 1400motor: 7,5weight approx.: 2300Standard Accessories: NC control system Klsdpfegickksx Agnet Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control Kledpfx Agegick Dsnst Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm (for models 1106–1306–1505) Finger protection Ball transfer table Easy blade gap adjustment from the front Ballscrew Stroke (cut) counter Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, sheet length: 2560sheet thickness: 2,5Standard Accessories: NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm  Finger protection Ball transfer table Easy blade gap adjustment from the front Ballscrew Stroke (cut) counter Klsdpfx Ajgiclasgnot Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, sheet length: 1100sheet thickness: 6motor: 7,5width: 2250length: 1750heigth: 1400Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms Klsdpfx Asgh Ndmsgnst 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards