Used Motovario Tkfl/5 for sale (59,384)

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Manufacturer engine: Ansaldo A1C0712CA249 -Motor power: 0.37 kW -Speed range without angular gear: 190-1000 rpm Podpfx Aboc I Rk Ieusrc -Speed range with angular gear: 19-100 rpm -Motor: adjustable -Hollow shaft: Ø 22 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 530/200/H220 mm -Weight: 22 kg

Condition: good (used), gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Motovario, adjustable gear motor -Gearbox: Type TKR / 5 40 - 200 rpm -Motor: EM type MA 71 b4 0.37 kW -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 465/190/H210 mm -Weight: 21 kg Podpfevy Szbex Abusrc

Condition: good (used), gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Motovario, adjustable gear motor -Gearbox: Type TKR / 5 40 - 210 rpm -Engine: Ansaldo type A1C0712C A249 0.37 kW -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 460/190/H210 mm Prsdovy S Dcopfx Abusc -Weight: 21 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Motovario Type: TKRR/5 -Motor power: 0.37 kW -Speed range: 20-100 rpm -Motor: adjustable -Drive shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 550/180/H230 mm -Weight: 24 kg Psdpec Ni Upjfx Abuorc

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKFL/10 -Manufacturer engine: Ansaldo A1C0712CA249 -Motor power: 0.37 kW -Speed range without angular gear: 190-1000 rpm -Speed range with angular gear: 19-100 rpm -Motor: adjustable -Hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 480/220/H210 mm -Weight: 20 kg Prodpocwtpqofx Abuec

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range: 35-180 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm Psdpfx Absc Nnaneuerc -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 445/190/H265 mm -Weight: 21 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: MOTOVARIO TKF/5 -Engine manufacturer: -Motor power: 0.37 kW -Speed range without angular gear: 190-1000 rpm Psdpfjc Nfdpjx Abuorc -Speed range with angular gear: 19-100 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 570/220/H210 mm -Weight: 28 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Motovario Type: TKRF/5 -Motor power: 0.37 kW -Speed range: 26-143 rpm -Motor: adjustable Prsdpsc Ni Unjfx Abujc -Construction: B5 -Drive shaft: Ø 19 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 450/183/H200 mm -Weight: 20 kg

Condition: used, Year of construction: 2005, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: Fidia Type: K 165 Predpfx Abez Rmn Sousc Type: 5-axis machining center Technical data: Year of manufacture: 2005 Table size: 1400mm x 820mm X-axis travel: 1000 mm, Y-axis travel: 620 mm, Z-axis travel: 700 mm Control system: Fidia C 1 Maximum table load: 2000 kg Spindle speed: 30000 rpm Weight: 12000 kg You can view the technical details as a PDF.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering a top-quality Jungheinrich forklift; it underwent a complete "5-Star" refurbishment by Jungheinrich in 2021 and has logged only 45 hours since that time. The paintwork is original and has not been repainted or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspections (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 Safety inspection (UVV) valid until: 10/2025 Operating hours: 7,792 (7,744 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-Star refurbishment: 03/2021 (complete), including Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex mast including full free lift Equipment: Solo-Pilot control, road-legal lighting (StVZO), LED lighting (2 front and 2 rear work lights), front/roof/rear cab windows Steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics (2 functions) Kaup fork positioner (NEW): 4.8T 466B The vehicle has run for only 45 hours since its refurbishment; all safety inspections and maintenance work have been carried out. Podpfezn Uv Tex Abuorc Please feel free to contact us if you have any further questions!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders Prodjzukurepfx Abuoc - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available Prsdpfx Abjz Nfwvouec -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Podpfx Abjw N Iz Houorc Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. Predpfx Abszz Rfqeuoc The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: excellent (used), functionality: fully functional, Haeger 618 MSPe-5 Year of manufacture: 12/2023. The system has been fully overhauled and serviced and is in perfect working order. Pedjz Rxkfopfx Abuerc The system can be inspected at any time.

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Prjdpoz I D Atsfx Abuoc

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Prsdpfx Ajz N Swiobujc Total number of drilling spindles: 16 Total number of tool changer positions: 14

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section Prodpfxozuhbio Abujc • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: used, Used Becomix model Beco Mini Lab RW 2.5, lab scale jacketed homogenising mixer. Approximately 5 litre capacity. Unit has a clamped dished top head and welded conical bottom. Internal rated -1/1bar at 100degC and 4bar at 110degC jacket. Unit has a top-entry agitator with scrapers powered by a 0.18kW, 220-240/380-420V, 50Hz, 1410rpm motor. Unit has a bottom-entry homogeniser mixer agitator, powered by a 1.6kW, 400V, 120Hz, 7090rpm motor. Unit includes an intergrated CIP Grundfos system, including a 24 litre Grundfos model PRO 24-H water tank rated 1.9bar at 0-70degC. Also includes: -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. Pedpjyx Ibgofx Abuerc - PLC control integrated into a mobile table.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Prjdpszhaqcofx Abuec

Condition: good (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Motovario worm gear type NMRV/030 -Speed: 17 rpm i 080.0 -Engine: Neri Motori type T5034 -Power: 0.06 kW -Hollow shaft: Ø 14 x 63 mm Prsdszbqqnopfx Abuoc -Protection rating: IP55 -Dimensions: 235/100/H130 mm -Weight: 3.5 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 96 h, Size 72 x 102 cm, Presscenter XL 3, Axis control, Wallscreen, Autoplate Pro, Preset Plus feeder, Preset Plus delivery, Program-controlled washup for ink, blanket, and impression cylinders, Non-stop feeder, Intercom, Double sheet detector, Extended delivery X2, IR dryer, water-cooled, Heidelberg Cleanstar, Weko AP 500 powder spray, Anti-static system in feeder and delivery, Airstar Pro, Chambered doctor blade coating unit, Machine is elevated 500 mm. Predpfe Agnh Nsx Abuec Machine no.: 552120, Impressions: 98 million.

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Pedpjz Nhx Aefx Abujrc Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: excellent (used), Year of construction: 2016, operating hours: 170 h, Size 72 x 102 cm, Presscenter, Wallscreen, program-controlled washup system for rollers, Preset Plus feeder, Preset Plus delivery, Autoplate, blanket and impression cylinders, chambered ducter blade coating unit, non-stop feeder, extended delivery X3, Heidelberg IR dryer, UV dryer at the end of the press, anti-static system in feeder and delivery, Heidelberg Cleanstar, Weko AP 500 powder spray system, Airstar Pro, machine is elevated 500 mm. Podpfxe Agnifs Abuerc Machine no.: 551581, impressions: 165 million.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us. Predpfx Abe Aazymsuec