Used Ms-Maschinenbau Mas-6-5-4 for sale (105,705)

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm Dwjdpfx Alopfcgaj Sec - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Dodpfx Alsz Agw Es Sowc - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Dedpfx Ajz Ag Rrol Sowc

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets Dwodpfx Ajzz Rpcol Ssc - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Dwsdpez Agv Usfx Al Ssc - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2001, Laminating machine – Sheet-to-sheet laminator STOCK – 14R678-1650/P ref 3016 Year: 2001 Max. sheet size: 1650 x 1650 mm Automatic liner feeder Automatic bottom feeder for open flute, E, B, EB Side lay Press band Dwodpfx Aljzhmnhs Ssc Flip-flop function Stacker PRICE – must be sold quickly!

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity Dwedjznmgqjpfx Al Sjc The line can be inspected by appointment. Additional photos and videos are available upon request.

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height Dwjdpfjgp Su Eex Al Ssc - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Dimensions Dodjzv N Iajpfx Al Sjwc Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Dwjdpfevbcl Hex Al Sec

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support Dwjdpfxox Ebzqe Al Ssc - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Dwodpfxjx Hf Tvo Al Ssc Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 Dsdpfx Alen Sm Ayj Sewc pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking. Dedsn Sm A Sjpfx Al Sewc

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5000 mm, width 1400 mm - 2 decks Dedpfjzqdczex Al Sowc * Driving: 15 kW E-motor

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Dsdjtufbnjpfx Al Sewc Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor Dwodpfxoful Uie Al Sec - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? Dedpfxjzdb Nms Al Sjwc The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW Dwsdsxx Am Uepfx Al Sjc - With HBC radio remote control

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Djdpfxszrglzs Al Sowc Operating pressure: 6-8 bar

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Dwodpfxem Rhfds Al Sec

Year of construction: 2006, condition: excellent (used), The machine was taken out of operation and put into storage. Dedpfx Ajncbtbsl Sewc Furthermore, it was driven as a capacity buffer and thus only little. The machine is sold with some spare parts such as engine / gearbox.

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP General: Dwodpfx Aeumk Nael Sec Display: 0-400kp/cm2 / 0-25Mp

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt Dedpfx Ajnyidbol Sjwc - 2.000 mm conveyor belt underneath the machine

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Dsdpfx Alezvx Dks Sewc Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.