Used Mulag Mulag Mkf 600 for sale (10,911)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included Lodpfox R Uw Sjx Adtohf * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2019, gearing type: other, driver cabin: other, Additional: * Adapter group for mounting plate size 3 * Mower head drive via PTO pump * Proportional control with single-hand control panel * Front boom mower suitable for both right- and left-side operation * Rear counterweight, parking frame, and hydraulic torsion frame * Hydraulic lateral shift of the boom arm * Maximum lateral reach 7,200 mm * Heavy-duty mulching blades * MK 1200 mulching mower head – working width 1,200 mm with Mähtronic system Other information: * Trade-in and purchase of vehicles and machinery possible. * Sales price excluding transport and delivery. * No liability for typographical or printing errors. * Subject to error, modifications, and prior sale. Lhedpfx Aeymmv Dsdtsf * Non-binding offer. * Photos may vary. Price applies to current condition. * All information provided without guarantee.

Condition: used, Year of construction: 2022, gearing type: other, driver cabin: other, Further equipment/features: * Adapter group for attachment plate, size 3 * Mower head drive via PTO pump * Proportional control with single-lever operating console * Front boom mower for right and left operation * Rear counterweight and parking frame * Hydraulic lateral shift of the boom arm * Maximum lateral reach: 7,200 mm * Heavy-duty mulching blades * Mulching mower head MK 1200 – working width 1,200 mm with Mähtronic Miscellaneous: * Trade-in and purchase of vehicles and machinery possible. Lodpfx Adeymmwnetehf * Sale price excludes transport and delivery. * No liability for printing or typographical errors. * Errors, changes, and prior sale reserved. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All details without guarantee.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Width: 1,000 mm • Frame depth: 600 mm • Load capacity per shelf: 150 kg • Number of shelves per bay: 6 pieces • Finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately from stock. Tiered prices per unit (net, plus VAT): Starter bay: 1 – 5 bays: €92.30 6 – 20 bays: €88.61 21 – 50 bays: €84.92 from 51 bays: €81.22 Lhodjuk E Thopfx Adtsf Add-on bay: 1 – 10 bays: €63.55 11 – 25 bays: €61.01 26 – 75 bays: €58.47 from 76 bays: €55.92 Available from our warehouse in Nordhorn. YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Additional costs depend on the delivery location and shipment size, and can be quoted individually upon request. TERMS OF PAYMENT Payment terms to be agreed upon when placing the order. The quoted price is a per unit/net price, or as stated in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used products for warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions. Four factors for your success – The four pillars of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, TECHNICAL DATA Lhsdpouba Rbofx Adtof • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, total length: 1,500 mm, total width: 600 mm, total height: 2,000 mm, TECHNICAL DATA • Manufacturer: Metalsistem • Frame height: 2,000 mm • Shelf width: 1,500 mm • Frame depth: 600 mm • Shelf load capacity: 100 kg • Number of shelves per bay: 4 units • Finish: galvanized • Condition: used Large quantities available immediately. PRICES: • Starter bay: €74.00 net per unit • Add-on bay: €58.00 net per unit Bulk prices net per unit plus VAT: Starter bays: • 1 - 5 bays: €74.00 net per unit • 6 - 20 bays: €70.30 net per unit • 21 - 50 bays: €66.60 net per unit • from 51 bays: €62.69 net per unit Add-on bays: • 1 - 5 bays: €58.00 net per unit • 6 - 20 bays: €55.10 net per unit Lodpfx Adsy D Tdkstohf • 21 - 50 bays: €52.20 net per unit • from 51 bays: €49.30 net per unit YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the items. This article is available for collection. Delivery or shipping is possible at an additional cost. The extra charges depend on the delivery location and the volume of the shipment and can be quoted individually by us on request. TERMS OF PAYMENT Terms of payment are to be agreed upon in case of order. The price is a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice stating the VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We constantly offer a wide range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The building blocks of DLK’s success – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp Ljdpfxjy Ep The Adtehf PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES – German-made – Not repainted Lhsdpfxeyg I Axj Adtef – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions at the top (length/width): 1000x600mm - Loading hopper dimensions at the bottom (length/width): 650x600mm Lhedpfx Adsytd Tgstsf - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife dimension: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions (length/width/height): 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German-made – Not repainted – In very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35,900 PLN Net price: 8,540 EUR according to a rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Lsdpsy Dirqjfx Adtshf Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Lhsdpfxsy E Ewxe Adtef Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift Lhodey Ah H Rjpfx Adtof This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, functionality: fully functional, mileage: 835 km, first registration: 12/2017, fuel type: diesel, axle configuration: 4x4, tire size: Vorne: 11.2 R 28, Hinten: 380/80 R 38, next inspection (TÜV): 02/2028, fuel: diesel, driver cabin: other, Year of construction: 2017, operating hours: 878 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, low noise, A robust snow blade for tractors in a heavy-duty industrial design is offered for sale. The blade has been used for winter service and is technically fully functional. The wear edges (cutting edges) have been renewed, making the blade ready for immediate use. Ljdpfx Adoyhcnfstjhf

Year of construction: 2009, condition: good (used), - 16 ton lifting capacity - Diesel drive with soot particle filter - Paper roll clamp - Up to 10 meters lifting height Lhedpfxjl Dxpte Adtof - 4 valve hydraulics LSP: 600 mm Length: 3.225 mm Width: 1.800 mm Power unit: Diesel Load capacity: 16.000 kg Load centre: 600 mm Tyres rubber, SE, pneumatic, polyurethane: SE / SE Height of mast, lowered: 4.000 mm Free lift: 2.600 mm Height of mast, extended: 9.700 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working width 600mm two 4kW motors smooth regulation of feed speed from 4 to 12 m/min brush speed 1000 rpm maximum material height 300mm Lhedewgal Hspfx Adtsf feed motor power 0.55kW

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Lsdpeww Im Hefx Adtjhf This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 600 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized Lhsdpfsi Ewqkex Adtof 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 600 mm surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 600 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Year of construction: 2018, condition: new, Your contact person in our company: Lord: Andre Evering Lord: Marcel Brahms Lord: Simon Blank We offer you a new post protection from the manufacturer Mecalux for sale. The post protection is suitable for a frame profile width up to max. 120 mm. Included in the scope of delivery are: 01x Post protection, new Material color: orange f. Stand profile width: approx. 120 mm Total height: approx. 600 mm Total width: approx. 132 mm Inner width: approx. 126 mm Total depth: approx. 70 mm Re-dequalifications: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (middle-mite hole): approx. 400 mm Weight / pcs.: approx. 4,298 Kg 04x Hexagonal screw: M8 x 25 mm 04x Tooth nut: M8 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Lhedpfxsd Rxyrj Adtsf Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We offer here a used post protection of the manufacturer Gemac for sale. The mullion protection is suitable for a frame profile width of max. 90 mm. Included in the scope of delivery: 01x post protection, used Material colour: cream white Design: V f. Upright profile width: approx. 90 mm Total height: approx. 600 mm total width: approx. 113 mm height of deflector: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 Kg 02x mounting plates, used Material colour: cream white Dimensions: 130 x 91 mm (WxD) Material thickness: approx. 7 mm 04x hexagon head screw: M10 x 35 mm 04x tooth nut: M10 04x washers: M10 Ljdpfx Ajfdqkasdtohf Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 600 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; Lhodpfohvmmtex Adtjf - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 600 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 04x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. Lodpfx Adshvmnbetjhf The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Lhodpfx Adex Ebrpotsf Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground Ljdpfoyay D Iex Adtehf 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Ledpfx Adsyaxmhetshf Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors Lsdpfx Adeyapf Ietshf 01x load sign With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.