Used Mwm Tbd 232V12 for sale (64)

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Crodpfjt S Ny Ujx Apbsh Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Crjdpfovmzwxox Apbjh Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Incl. control cabinet Incl. silencer

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Crjdpfoz D Ihfox Apboh

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, 4 units: Engine: MWM Deutz TBDG 441 BV16, dual fuel, gas, diesel, year 1993. Spare parts also available for sale, including turbochargers, injection pumps, cylinder heads, crankshafts, etc. 2 units: Generator: AVK 6600V 173A 50Hz, control unit. Crsdpfoy Hmhbox Apbjh

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. Cjdoz E A Rwopfx Apbsrh The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Csdpezudbfjfx Apborh Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: not inspected (used), Year of construction: 1971, functionality: unexamined, power: 992.92 kW (1,349.99 HP), fuel type: diesel, number of cylinders: 16, type of cooling: water, MWM 16-cylinder engine removed from a decommissioned inland vessel. The engine was operational at the time of removal. It has been stored for approximately 11 years. Functionality has not been tested. Loading is possible. Sale only to commercial buyers and under exclusion of any warranty. Credpfx Apsw Aphcebjh

Condition: used, Year of construction: 1997, with exhaust gas heat exchanger KWe: 500 Crsdpfxey Tu Eze Apboh Working hours: 41000

Year of construction: 1969, condition: used, Generator set, emergency generator Manufacturer: MWM – Motoren-Werke Mannheim AG Type: D208-6 (6-cylinder diesel) Engine No.: 208.6.02024 Year of manufacture: 1969 Output: 57 hp, 1500 rpm Generator Manufacturer: A. van Kaick (Generator and Engine Works, Frankfurt am Main) Type: BJB 42/45-4, self-regulating Generator No. 40719 Csdpfoztndzex Apbsrh Output: 40 kVA, 400 V, cos φ 0.8, 1500 rpm 40 kVA, 50 Hz 51026ä

Condition: good (used), Year of construction: 1980, Diesel emergency generator Manufacturer: MWM Mercedes - AEG, Year: 1980, with switchgear cabinet and cooler. Diesel engine: MWM, 8 cylinders, 405 hp Operating hours: 303.7 hours Codpfx Ajt In Nyspborh Generator: AEG, Type: SIRI 100 D/4, 330 kVA.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data Crjdpfxsytq A Uo Apbeh • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: used, Year of construction: 1994, machine/vehicle number: 628.16.010032, power: 3,600 kW (4,894.63 HP), fuel type: diesel, rotational speed (max.): 1,000 rpm, Generator: 4250 KVA, 50 HZ, 10000 V Codpfsxmu Rbex Apberh

Condition: excellent (used), Vertical head MWM Ruhla SK 40 Pinion travel 80 mm Diameter of mounting flange 180 mm Bolt circle diameter 135 mm Four mounting holes, diameter 15 mm Diameter of centering pin 75 mm Cedpfx Apozdub Ijborh Height 500 mm Width 190 mm Depth 250 mm Weight 50.5 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos Cjdpfx Aeivfgfepbsrh -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos Codpjivqmlefx Apbsrh -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pressing force: 160 t, ram plate length: 4,000 mm, Equipment: documentation/manual, safety light barrier, Used Warcom 160-ton, 4-meter CNC press brake. Codoz It R Hopfx Apberh Brand: WARCOM Pressing force: 160 tons Length: 4000 mm CNC control Tool set included in the price.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516027002115, Year of construction: 1999, operating hours: 2,944 h, load capacity: 4,000 kg, lifting height: 5,300 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, gearing type: automatic, battery manufacturer: Hoppecke, battery model: 80V 5 HPzS 775, battery capacity: 775 Ah, battery voltage: 80 V, battery weight: 1,893 kg, DGUV certified until: 01/2027, fork length: 2,200 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 6,168 kg, empty load weight: 4,275 kg, total height: 2,480 mm, color: orange, Equipment: CE marking, UVV, cabin, lighting, pallet forks, sideshift, Price: €10,000 net €11,900 gross SKU: 518 - New seat installed (see photos). Basic Information: - Manufacturer: Still - Model: R60-40 - Year of manufacture: 1999 - Operating hours: 2,944 h Technical Specifications: - Drive: Electric - Transmission: Electric - Pedals: Single-pedal control - Control: Single pilot - Battery: 80V 5 HPzS 775 Ah (09/2018) - Charger: Included Mast / Dimensions: - Height: 2,480 mm - Lifting height: 5,300 mm - Free lift: 1,700 mm - Mast type: Triplex mast - Fork length: 2,200 mm - Rated load capacity: 4,000 kg - Load center: 500 mm Tyres: - Type: Superelastic tyres (SE) Hydraulic equipment: - Sideshift: Mounted - Fork positioner: No - Rotator: No - Additional hydraulics: TBD Equipment: - Cab: Full cab - Lighting: 2x front - Safety equipment: Seat belt - Heating: No - Note: New seat will be installed Extras: - New UVV safety inspection on request - Immediately ready for operation - On-site viewing & test drive possible by appointment Transport: Cost-effective shipping available on request. Invoice with VAT: You will always receive an invoice stating the applicable VAT. Battery: For battery-powered units, we are happy to offer you a quote including a new battery. Codeyft Uqjpfx Apbsrh Contact: If you have any questions or are interested, please contact us by phone, email, or via the contact form.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Crsdpfxsz It Sqe Apboh Electrical and hydraulic diagrams Rear safety gate Side safety gates

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 Cedpfsivql Iox Apbsrh -Note: without controls -Individual components: see photos -Dimensions of generator: 4000/2220/H2170 mm -Dimensions of cooler: 2150/360/H1860 mm -Dimensions of silencer: 2230/825/H825 mm -Fan dimensions: 1385/1100/H1100 mm -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Crjdpsz Iuaiofx Apbsh Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: used, mileage: 1 km, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: red, empty load weight: 1,400 kg, first registration: 08/1954, Year of construction: 1954, total length: 2,400 mm, total width: 1,430 mm, total height: 1,250 mm, front tire size: 5.50-16AS, rear tire size: 11,2x24, driver cabin: other, Vehicle location: Bovenden It was extensively and faithfully restored to its original condition at considerable expense and signed by Lamborghini. The vehicle comes from a large collection that was dissolved for health reasons. The DL 25 was one of Lamborghini’s most popular water-cooled tractors. The 2-cylinder engine was manufactured by MWM and then sold to Lamborghini Trattori in 1955. It was produced between 1952 and 1960 in 916 units, and approximately 200 units are known to still exist today. The diesel engine has a displacement of 1750 cm³ and produces 24 hp, with a 4-speed plus reverse gearbox for a top speed of 16 km/h. In 1954, it cost 1,400,000 Lire. This model of the MWM or Lamborghini engine is considered to be the tractor that put Lamborghini on the map and brought him the wealth to become a customer of Ferrari and start the history of Lamborghini Automobili. Crsdpfx Apjvhhy Njbeh Artcurial Sale Rétromobile 2017 - Lot 76 Sold for €35,760 Accessories information is provided without guarantee; subject to changes, prior sale and errors!

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Credpfxjz Hvyze Apbsh Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Year of construction: 2025, condition: new, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(70-270)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Crjdpfxjv Nnb Aj Apbeh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 1~60g; volume per weighing head: 0.3L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Credpfx Apsv Nna Sobeh

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 1~60g; volume per weighing head: 0.3L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 90 cycles/min; bag sizes: L(40-250)xW(50-170)mm, (double film pulling possible for longer bags); suitable film width: 120-360mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Cjdev Nnbcopfx Apborh