Used New Europa Vs390 for sale (17,659)

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. Ppodpfxsnzhtws Adler EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Psdpfx Adox Dnb Uslopr Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Ppedpfx Adsu Th D Rjlsr Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), functionality: fully functional, power: 112 kW (152.28 HP), overall weight: 22,200 kg, Year of construction: 2006, operating hours: 8,318 h, Equipment: cabin, hydraulics, quick-change device, NEW Holland Kobelco E 215/SW 10-3/Hydraulic • Manufacturer: NEW HOLLAND Kobelco • Model: E 215 • Year of manufacture: 2006 • Engine power: 112 kW/152 HP • Engine type: CNH F4BE0684M*D600 • Lehnhoff quick coupler • Hammer/grapple/shear hydraulic piping • Windscreen wiper • High-low speed gear Ppodpfoy E Nixex Adlsr • Radio • Operating hours: 8,318 h • Total weight: 22,200 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our Terms and Conditions.

Condition: used, Year of construction: 2014, operating hours: 11,803 h, power: 192 kW (261.05 HP), fuel type: diesel, first registration: 07/2014, color: red, Used New Holland tractor T7.270 4WD SA – Auto Command – 11,803 operating hours – Engine 192 kW – Year of manufacture 2014 = More information = Podpey D Uytsfx Adljpr Model year: 2014 Front axle: Articulated Drive: Wheel Number of cylinders: 6 Engine displacement: 6,728 cc Reference number: 87 Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: Psdpfxoy Altbs Adlspr You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO Podpfxeyzliys Adlopr TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Qty 2 available Psdpfx Asyvutwjdlopr

Condition: new, Year of construction: 2023, New - Never Installed Envistal Flex Air handling units with high flexibility Side-connected air handling unit with integrated controls and a wide range of functional sections. Ppjdeyvunuspfx Adljr Model - TH-600-AA-2V-1-40-00 Year 2023Max allowable pressure 40.5 bar

Condition: used, This listing is for the New Brunswick C585-86 Ulta Low Freezer The unit is in full working condition and is ready for immediate use The New Brunswick C585-86 Ultra Low Freezer is a high-capacity laboratory freezer designed for the secure long-term storage of biological samples, reagents, and temperature-sensitive materials. With a temperature range of −50°C to −86°C, it provides stable ultra-low temperature conditions suitable for research laboratories, biobanks, pharmaceutical facilities, and clinical environments. This model offers a generous 585-litre storage capacity and robust construction to support demanding laboratory workflows. The advanced refrigeration system ensures reliable temperature control with efficient pull-down performance, reaching −85°C from ambient temperature in approximately 4.5 hours. The C585-86 features a durable stainless-steel interior and high-performance insulation designed to maintain temperature stability while reducing energy consumption. Integrated monitoring and alarm systems help protect valuable samples by alerting users to temperature fluctuations or power interruptions. Built for reliability and long-term operation, the New Brunswick C585-86 ultra-low freezer is a dependable solution for laboratories requiring secure storage of biological materials, vaccines, enzymes, and research samples. Ppsdpfxoyuwvqj Adljr

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe Ppedoyug R Rspfx Adlsr handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 2013, operating hours: 7,272 h, Equipment: all wheel drive, * New Holland W 80 B wheel loader * Year: 2013 Ppedpfxjyum Ngs Adlsr * Operating hours: 7,272 h * Weight: 6,240 kg * Quick coupler * 1 x fork * 1 x bucket * More pictures and videos via WhatsApp * Information subject to change; intermediate sale reserved.

Condition: used, Year of construction: 2006, operating hours: 12,620 h, power: 92 kW (125.09 HP), Drive: Wheel Number of cylinders: 6 Ppsdpfjyw Nufsx Adlsr

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Ppsdpfxsyuuc Is Adler Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: Ppsdpfsyuubdox Adljr 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2023, operating hours: 23 h, power: 41 kW (55.74 HP), next inspection (TÜV): 12/2026, Equipment: all wheel drive, cabin, New Holland T4 S 55 ?As New? T4S.55 CAB 4WD STAGE V .: ELRT4S55EPX101424 Year of manufacture: 2023 First registration: 12/2024 - Warranty until 12/2026 Operating hours: 23 MID-MOUNT CONTROL VALVES: 336125-2 Mid-mount control valves & joystick with switch for third function 336125-2 MMV MECH. & CROSS LEVER DRIVER'S SEAT: 348220-Air-suspended pilot seat with fabric cover TRAILER HITCH: 330772-Automatic trailer hitch RADIO: 342174-DeLuxe radio with Bluetooth Additional equipment: Passenger car trailer hitch Accessories: Göweil rear bucket GHU08/1700 Bucket depth: 800 mm | Front/side wall height: 600 mm Bucket width: 1,700 mm Weight: 263 kg Basic equipment: 10-45 kW (~15-60 hp) //Payload up to 2,400 kg Single or double-acting two-stage telescopic cylinder, mounted vertically on three-point frame Three-point linkage Cat. I Torsion springs for rapid lowering to end position including automatic end-position locking in single-acting version Flat bucket floor with welded wear edge made of HARDOX 500 Removable swinging tailgate Göweil extension side wall 1.00 Main technical data & equipment * Engine: 3-cylinder FPT engine, Stage V. * Power: 55 hp / 40 kW. * Transmission: Mechanical 12/12 shuttle transmission (Syncro Shuttle). * Speed: 40 km/h. * Cab: 4-post cab with panoramic roof window, heating/air conditioning. * All-wheel drive: Electro-hydraulically switchable. * Hydraulics: 2 rear remote valves (standard couplers). * PTO: 540/540E. Ppodpfx Aoy A Avtedlsr * Empty weight: approx. 3,100 kg.

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Ppjdpfxey Hgkie Adlor Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 More INFO at: Luis Lucena (German, English, Spanish, French) Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors excepted. Pjdpfsyzk Iuex Adljpr We will gladly accept your used vehicle as trade-in. Financing available directly at our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 1997, Europa Centurion CU5 Ram Type Milling Machine (Like Huron) Excellent condition - we welcome any inspections! Year 1997 Specification - Table size 1635 x 460mm Pedpfovm Abrox Adljpr No of T Slots 5 Width of T slots 18mm Distance between slots 80mm Longitudinal travel 1300mm Vertical travel (knee) 440mm Cross Travel (ram) 650mm Min Spindle nose to table surface 40mm Spindle Taper 50INT No of spindle speeds 27 Spindle speed range 30-2050rpm Longitudinal powerfeed 10 - 1000mm/min Cross powerfeeds 10- 1000mm/min Vertical powerfeeds 5 - 500mm/min Longitudinal rapid feed 2800mm/min Cross rapid feed 2800mm/min Vertical rapid feed 1400mm/min Spindle motor 7.5kW Max Table load 1800kgs Dimensions - L 2010mm x W 2621mm x H1950mm

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Ppjdpfx Adenxi H Uolor Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: used, fuel type: diesel, first registration: 07/2005, Year of construction: 2005, operating hours: 8,439 h, Mini excavator Kobelco New Holland E70 – total weight 8,000 kg – engine power 40.5 kW – quick coupler system – CW10 – swing boom – grading blade – = More information = Drive: Crawler tracks Operating weight: 7,950 kg Reference number: 7 Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Psdpfx Adsx Scnbjljpr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,970 h, machine/vehicle number: N6LA5823, Equipment: UVV, air conditioning, cabin, hammer hydraulics, including MH-MS21 quick coupler - Hydraulic breaker piping - Trenching and ditch cleaning bucket Sale in as-is condition Interim sale and errors excepted! Sale exclusively subject to our general terms and conditions (GTC) Podey Amm Nopfx Adlspr Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some of these may result from transmission errors within the various platform providers' systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information to initiate contract negotiations. The information given here is without guarantee and does not constitute warranted characteristics.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,610 h, We offer a New Holland combine harvester – CR980 – grain combine – year of manufacture 2003. It worked until the end of the harvest, is in excellent condition, recently serviced, and we invite you to view it at our farm near Olsztyn. - Garaged during winter. - Thresher hours: 4147 Ppodexu E Eropfx Adler - Engine hours: 5610 Highly recommended!

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 6 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Ppedey H Dhlspfx Adlsr WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, semi-automatic chamfering machine Design and manufacturing in England - automatic chuck with material sensor - automatic spindle start when the cutting head is moved - bar diameter 26-105 mm for smaller diameters, a second cutting head is required - adjustable bar support - max. chamfering / turning length 45 mm - facing & chamfering tool Ppjdpfx Adjgkah Tslor - precision three-jaw chuck - large chip collection container for easy cleaning - can be easily moved with a pallet truck - weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE-certified OPTION: - adjustable stop + universal chamfering tool € 1,990