Used New Bottle Skimming Machine for sale (75,682)

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m Gbjdpfx Ajx T Ai Ijqisr

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. Gbedpfx Asubbqieqior The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Swing (Max) 270mm Distance between centres 200mm Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES Gbedpfjyynlzsx Aqior STILL IN PRODUCTION TILL MAY 15TH

Condition: used, For profiling and routing windows Gjdpfx Aqoztv Easisbr doors individual components and similar items with all-round profiles, including mechanisms for single-person operation Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Gbodpfx Asztv A Soqijr Technical data: - Year of manufacture: 1997

Condition: used, For profiling and edge-milling windows Godpfjztv Afox Aqijbr doors individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Gbodpfxsyxpqce Aqier Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Filling volume: 5 ml - 5,000 ml Capacity: 30 - 100 bottles per minute Gsdpfx Aozfpq Tjqiebr Suitable for pharmaceutical, chemical, and food products.

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types Gsdpfx Asyv Addeqisbr

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  - Capacity: Up to 150 bottles/min - Operation: Continuous from bulk hopper feed - Bottle types: Plastic (PET, HDPE, etc.) - Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) - Bottle orientation: Bottom-first via pneumatic flipping device - Machine direction: Left to right - Working height: 900 mm Gjdpsxqpk Dofx Aqisbr - Frame: Welded, stainless steel (AISI 304) - Sort drum diameter: 1,500 mm - Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access - Electrical supply: 3 × 400 V, N, PE, 4 kW - Compressed air: 400 Nl/min at 6 bar - Machine guarding: Polycarbonate panels - Safety: Error detection with clear text display - Condition: As new (used for demonstration only) - Warranty: 12 months manufacturer warranty

Condition: used, machine/vehicle number: R92, Used KOSME rotary bottle filling machineTechnical Specifications & Performance DataThis rotary rinser-filler is engineered by KOSME for precise, reliable wine bottling within industrial packaging environments. The carousel configuration ensures consistent bottle handling and steady throughput suitable for beverage production, including second hand and used bottling line integrations.Machine type: Rotary rinser-filler (carousel)Manufacturer: KOSMEPrimary application: Still wine fillingProduction speed: Typically a few thousand bottles per hour (configuration-dependent)Bottle size range: Approx. 0.25L to 1.5L (typical 0.75L wine format)Containers: Glass bottlesFilling principle: Level-controlled gravity or light vacuum (light depression)Rinsing: Integrated rinser with three spray stagesProduct contact materials: Stainless steelEnclosure: Glazed, lockable safety guardingAdvanced Automation & Control SystemsThe machine supports both automatic and manual operation to adapt to production needs and changeovers. Operator controls promote safe, efficient handling while maintaining high-quality filling.Automatic/manual mode selectorManual jog and machine start/stop controlsSpeed control for carousel rotation and process optimizationEmergency stop and reset-to-zero functionsLight signal for status indicationGate interlock and glazed safety enclosure for operator protectionDedicated rinsing control with three spray stagesProduction Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or operation as a standalone unit, this rotary rinser-filler interfaces easily with upstream depalletizing/inspection and downstream labeling, capsule application, and secondary packaging machinery. Its glass-bottle handling and stable carousel motion support consistent infeed and discharge on standard conveyor systems.Inline or standalone operationCompatible with conveyors and accumulation systemsFormat range suited to common wine bottles: 0.25L, 0.75L, 1.5LIdeal for beverage production environments focusing on wineMachine Condition & Maintenance HistoryThe machine has operated in a well-maintained environment and features a full glazed, lockable enclosure that preserves hygiene and safety. Backed by KOSME engineering, spare parts and service support are readily accessible through established industrial channels. The overall condition is aligned with second hand equipment prepared for reliable start-up in professional beverage production.Operational Performance & VersatilityPurpose-built for still wine, the level-controlled gravity or light-vacuum system ensures consistent fill levels across a range of formats without over-pressurizing glass containers. The stainless steel product-contact surfaces support hygienic operation and quick cleaning, while the integrated rinser with three spray sta... Godszrgrbopfx Aqijbr

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control Gbedpfx Aou R Sy Ajqisr - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Gedpfxozizyzo Aqisbr Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Gbjdjzhgz Iopfx Aqijr Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Gjdpfx Aqjw Ed U Neisbr Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, New electric scrubber-dryer, floor cleaning machine, DAEWOO, type DAFL50A Year of manufacture 2025 – unused, from stock Theoretical area performance: 2000 m²/h Working width: 510 mm Cleaning brush: Ø 510 mm Brush speed: 175 rpm Suction nozzle width: 850 mm Tank volume, clean water: 50 liters Tank volume, dirty water: 50 liters Noise level: 66 dBA Climbing ability: 2% Battery voltage: 24 volts, 100 Ah Gbodezcxmgjpfx Aqijr - Battery charger, 24 volts - Battery, 24 volts, 100 Ah - One cleaning brush - Two separate tanks - No drive system; the machine is pushed manually, or the machine moves itself via the brush drive Machine length: 1200 mm Machine width: 510 mm Suction nozzle width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg New – original packaging – unused, from stock

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Gedpfjzg I Efjx Aqisbr Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Machine partitioning: chain division: 110 mm Operation / Control: Simatic S7

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Gbodpfx Aeurulpsqior Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg Gsdpfxezb Rmvj Aqiebr * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for machines in prompt delivery we grant you Price List year 2024 Gbjdeh U A Uaspfx Aqior -35% OFF . Promotional Sumer 2026 CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Gbjdpfxsv R I D Ho Aqior Model RCP-141 To include Capper Feeder & automatic capper machine

Condition: used, Stretch blow molding machine by Etek Gbodpjkucxlsfx Aqier ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Gbedpfx Aqjuvdzujijr

Condition: excellent (used), power: 100 kW (135.96 HP), gearing type: automatic, fuel type: diesel, color: other, lifting height: 7,000 mm, tire condition: 85 %, axle configuration: 4x4, first registration: 05/2024, Year of construction: 2024, operating hours: 103 h, Equipment: air conditioning, all wheel drive, differential lock, = Additional options and accessories = - 1 fuel tank - Day Cabin - Hub Reduction - PTO = Remarks = Condition CE type: CE = More information = General information Cab: day Drivetrain Drive: Wheel Axle configuration Godpfx Aqsy Rn Eveiobr Tyre profile: 85% Brakes: disc brakes Front axle: Differential lock; Max. axle load: 6000 kg; Steering; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Max. axle load: 6000 kg; Steering; Reduction: hub reduction Functional Clearance lift height: 700 cm Working height: 700 cm Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm Gsdpfxjvf I Ibo Aqiebr angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.