Used Niles-Simmons N30 - 3Mc-2500 for sale (3,113)

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm Redpfx Aowwarusbgew weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Rjdpswbuyzsfx Abgsw

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min Rsdjx Ik Tdspfx Abgsw rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. Rsdpfx Abjtpq Urjgjw tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, *

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. Rsdpfovu E R Sjx Abgjw The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, Redpfx Asxb Efrsbgjw - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Rjdpjx Emviofx Abgow Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 Rjdpfx Ajxa Hkyjbgew tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm turning height: 275 mm x-axis: 925 mm Rsdpfx Absvb Dq Djgew z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t Rjdpfsx Avp Rjx Abgow dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 4,500 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 5,200 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates timely collection by the end of September! Turning and milling center with tailstock and additional equipment! TECHNICAL DETAILS Rodpfxew Da R Ds Abgow Machining area Turning length: 4,500 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Travel paths Travel - x2: 875 mm Travel - z2: 5,200 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power type/Frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 170 kVA Rated current of the machine: 220 A Total weight: 40.0 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Supply fuse: 250 A Total weight: 31.0 t Rodow Dbndopfx Abgow

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t Rjdpfx Absv Nw Npogew The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm Rjdpfxeyqt R Aj Abgjw slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm T size: 22mm Rsdpjwu D Afjfx Abgjw Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Rodpfox I Simox Abgjw Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Rodpozaz Egofx Abgew Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm Rodpfx Abjy Tyy Degjw - Multifix "C" toolholder system - some toolholders - steady

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Redszdt Slopfx Abgjw Weight: approx 2,5 T

Condition: used, Technical details: Rjdpfxovgbhqs Abgew diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. Rsdsu Tq U Iepfx Abgew *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! Rjdou Nlatepfx Abgjw i.D. *

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine xH: 4,7 x 1,5 x 1,5 m Thread cutting possible Accessories: 4-jaw chuck Rodpsu Ix A Eefx Abgjw various tips Gear wheels Jaws and small parts *

Condition: used, Technical details: Rodpfx Asvgbhksbgjw diameter: 250 mm passage: 80 mm width: 80 mm revolution per minute: 2400 U/min dimensions: Ø 250 x B: 180 mm incl. 3 clamping jaws mounted, max. clamping range outside: Ø 60 - 188 mm and max. clamping range inside: Ø 17 - 192 mm with base plate Ø 303 x 48 mm; outer pitch circle Ø 280 mm with 4x M16 holes; inner pitch circle Ø 134 mm with 4x M12 holes; T-slot 3x lengthwise and 3x crosswise, T-slot spacing = 64 mm Flange = Ø 248 x 13 mm Accessories: with chuck key 1 set of soft jaws *

Condition: used, Year of construction: 1963, Technical details: Redpfx Abju Ix Arsgew turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *