Used Okuma Lh55-N for sale (51,784)

Condition: good (used), spindle bore: 360 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Csdpjwxb Erjfx Apbsrh Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Codjz E Nq Repfx Apbsrh

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0712-100481, feed length X-axis: 1,050 mm, feed length Y-axis: 560 mm, feed length Z-axis: 460 mm, controller manufacturer: Okuma, controller model: OSP, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: used Okuma Genos M560R-V milling machine. X/Y/Z: 1050 x 560 x 460 mm, Table: 1300 x 560 mm OSP control system VAT invoice provided. Please contact me for further details. Type: GENOS M560R-V Serial number: 0712-100481 Year of manufacture: 2016 Cjdpfx Asz Ahx Ropborh Gross weight: 7500 kg

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals Crodpsziqp Ssfx Apbeh The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition Crodpfxoy Rx Tds Apbeh 521 operating hours 347 spindle hours

Condition: used, Year of construction: 2008, Technical details: max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Credez Ig Sqopfx Apbjh Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: repair required (used), Year of construction: 2013, operating hours: 11,000 h, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 68 mm, spindle speed (max.): 3,800 rpm, overall weight: 6,500 kg, chuck outer diameter: 250 mm, The machine has a crack in the turret housing and in the cross-slide. Although everything is operational, due to this damage it is better suited as a source for spare parts. All attachments, servomotors, coolant pump, control unit, chip conveyor, etc. are in impeccable condition. Credpeynf Nfjfx Apbjh

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Crodpfxey T I U Ae Apboh Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Credpfx Apjz Arzvjbeh Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Codpfx Apozat Tvsberh Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, Csdpfxez Dgudj Apbsrh HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Csdpfx Apsy R A N Asbsrh Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Cjdpfjzt Ihmjx Apbjrh Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW Credszhwnrjpfx Apbjh 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm Crodpfx Asxxiiijpbjh - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * High-torque motor power: 18.5 kW. * Cutting force: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool consumption tracking. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. Crodpfx Apsz E Dytjbjh * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinge-type rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2001, 7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Spiral-circular interpolation Upper turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swinging diameter: 610 mm Turning diameter over cross slide: 580 mm Distance between centers approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm ATC magazine 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Crsdpfxjz D I Ifj Apbjh Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pump New screen New panel Several BT50 tool holders Weight approx.: 20 tons Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 51026ä

Condition: used, Year of construction: 2001, functionality: fully functional, CNC turning and milling center Okuma MacTurn 30 Control system: OSP-U100L Year of manufacture: 2001 Internal machine number: 51 Turning length: 1,000 mm Crodpfxezwl Raj Apbeh Turning diameter: max. 500 mm Diameter of rotation over the machine bed: 500 mm Diameter of rotation over the tool slide: 500 mm Tool holder: SK 40 Tool positions: 60 positions Travel ranges: X-axis: 430 mm Y-axis: 190 (+/-95) mm Z-axis: 1,090 mm C-axis: 0.001° - 3-jaw chuck SMW Autoblok - Programmable tailstock - Chip conveyor - Paper band filter system with high-pressure pump - Oil mist extraction system - Touchsetter - One Touch IGF - Door automatic - Large chuck package - Large tool package

Condition: used, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm Csdpfx Apoz Ig Swjbjrh max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: excellent (used), Year of construction: 2001, Turning length: 1,500 mm Crodpfsztr Nnsx Apbjh Turning diameter: 580 mm Travel range X-axis: 598 mm Travel range Y-axis: 230 mm Travel range Z-axis: 1,660 mm Max. turning diameter: 580 mm; turning length: 1,500 mm; control: OSP 7000 L; greatest pass round over bed: 610 mm; swing diameter over slide rest: 580 mm; main spindle: turning speed range - main spindle: 12 - 2,800 min/-1; spindle bearing diameter: 150 mm; spindle bore: 110 mm; spindle nose: JIS A2-11; power capacity - main spindle: 37 (30) kW; C-axis: 0.001°; axis stroke: x-axis: 598 mm; y-axis: 230 (+110 / -120) mm; z-axis: 1,660 mm; feeds: rapid traverse: C: 100 min/-1; cutting feed speed: X / Z / Y: 0.001 - 1,000 mm/rev; turret: type: H2 ATC; number of tool positions: 80 pos.; driven station: stepless; spindle speed - driven tool stations: 40 - 3,000 min-1; tool shank height: 25 mm; boring bar shank diameter: 50 mm; tailstock: diameter of quill: 120 mm; quill stroke: 170 mm; taper of center: MT 5; tool magazine: tool taper: MAS BT 50; max. tool diameter: 170 mm; max. tool length: 350 mm; max. tool weight: 20 kg. Accessories: 70 pieces of tool holders.

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Codpfozimqxsx Apbsrh

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with Gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Internal machine no.: 13 Max. turning length: 380 mm Turning diameter: 200 mm Swing over bed: 450 mm Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse (m/min): X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 for workpiece size Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Cedpoylkcrofx Apberh Touchsetter Hydraulic tailstock Coolant pump Tool package

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, Cedpfxozghc Dj Apbsrh B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: excellent (used), Year of construction: 2011, CNC Lathe Okuma Genos L300E-M incl. bar feeder Samsys M3000SL Control: OSP-P200L-R Year of manufacture: 2011 Internal machine number: 14 Cedpfxjyli T Nj Apbjrh Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyor - 3-jaw chuck Ø 250 mm - Hainbuch collet chuck - Touch setter - Tailstock - Coolant pump - Bar feeder Samsys Multi 3000SL - Various accessories (see pictures)

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Cjdpfxsqucnbo Apberh Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals