Used Oma Vertical Sander With 2 Belts for sale (87,321)

Condition: used, Year of construction: 2001, SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA Dksdsmxkr Depfx Abaon - Transversal sanding on two sides of straight or shaped / curved elements - N. 2 motors for abrasive belts 7.5 hp each - N. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - Minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Dkodszcd Amopfx Abasn Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm Dkodpfeypwarsx Abasn engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts.

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt Dksdpozabifsfx Abajn - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 Dkjdpfx Abjgm Tqwjasn working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Dedpfx Abjxy Hrqeajkn Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration Dkjdpfsy E Iycox Abaon 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds Dsdpfx Aeydb H Sjbaekn - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: good (used), Grinding wheel, surface grinder, grinding belt, wide belt -Manufacturer: VSM, Wide belt sanding strip 1350 x 2620 mm 2 pieces Dkedpfx Abokvrppsaen -Type: SMA Form E13 Series KP510E -Grain size: 180 -Price/Fee: complete -Carton dimensions: 1480/260/H330 mm -Weight: 5.3 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical data: - Edge grinding machine for edge processing on - welded boxes , cabinets , safes etc. - control SIEMENS for clocking + oscillation - max. sanding height approx. 1200 mm - sanding belt dimension 100 x 2240 mm - sanding belt speed 12 + 24 m/s - sanding unit swivelling - 2 magnetic clamping plates - Mot. sanding dust extraction Dkedpeggbmajfx Abaon - Pneumatic connection 6 bar - drive 400 V - space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Condition: new, Year of construction: 2026, This sander is a machine designed for smaller carpentry workshops. Small dimensions allow for very high mobility of the machine. Movable table, graphite guide ensures constant speed and smooth belt movement, machine bed made of gray cast iron, linear gauge for precise grinding at an angle, high stability thanks to a solid base, discharge device. Technical data: Belt size [mm] 1220 x 150 Dodpsvugrkefx Abaokn Disc size [mm] 225 Work table size [mm] 310 x 190 Max. grinding length [mm] 590 Diameter of the suction nozzle [mm] 60 Grinding at an angle [º] 0º -45º Belt speed [m/s] 5.5 Disc speed [m/s] 23 Total engine power [W] 750 Weight [kg] 54 Warranty [months] 12 For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 1990, Vertical Belt Sander TMUA Table size: Width 325 mm x Depth 210 mm Dksdpfx Abex Hdxwjasn Motor: 5,5 kW Band Length: 1800 mm Band width: 125 mm Voltage: 380 V Year of construction: 1990 - Machine in very good condition Width: 900 mm Depth: 900 mm Total height: 1600 mm Weight: approx 250 kg

Condition: used, HORIZONTAL VERTICAL BELT SANDER COMEVA MOD. LC180 Djdpswrpzhsfx Abaskn

Condition: used, Combined disc + vertical belt sander Dedpolagdwjfx Abaskn Disc diameter: 600 mm Encumbrance: 110 x 80 cm, height 160

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and Djdpsygxc Ajfx Abaskn hight - relief) with interface and software for required dimensions

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel Dodpfxoyug R Rj Abajkn has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: good (used), Year of construction: 1997, functionality: not functional, machine/vehicle number: TR206 10 1997, total width: 1,100 mm, total height: 150 mm, working width: 1,100 mm, workpiece weight (max.): 150 kg, power: 27.77 kW (37.76 HP), height adjustment type: electric, table width: 1,065 mm, operating pressure: 6 bar, Sandingmaster CSB2 1100m/m wide Roller & Pad Calibrating & Fine Sanding machine. Both 80* Shore hardness. Sandomatic Setting System. Dkodsx Hr Dhspfx Abaon Ampmeters on both motors. Feed Motor 2 Speed 7 & 14m/min. Sanding belt dimensions: 1900 x 1130m/m. Operator manual available. Weight: Approx 3500kg. Complete with Sanding Belts: 80, 100 & 120 grit. Photos on WhatsApp.

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 Dkjdpfx Asi D D Efsbaen 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale Dkjdpswt Sqhofx Abaon The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Colour: Grey Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Sanding belt dimensions 2620x1115mm Dkedpfxewnh A Ae Abajn 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - CE certificate present: No - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Colour: Grey Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Position: Top - - Type of unit: Sanding pad - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Roller material: Rubber - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 28 Djdpjyz U Dmefx Abaekn - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Support belt grinder Dksdeyv A Dqjpfx Abasn Brand: Lehnert Contact wheel width: 50 mm Contact wheel diameter: 250 mm Belt size: 2000 x 50 mm Motor power: 1.5 kW 380 Volt 2830 rpm

Condition: used, axle configuration: 3 axles, first registration: 06/2006, color: other, Year of construction: 2006, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Dedpfeza T Erox Abaekn Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine-tuning machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding unit and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edge banding machine with combination unit and electronic segmented pressure bar. Edge segments can be switched on and off. Segment width of the pressure bar 22mm (ideal for intermediate sanding of painted surfaces). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit compensation. Drive motor 11kW. Infinitely variable sanding speed 3 - 15 m/s via frequency converter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device controlled by workpiece. Constant table height of approx. 950mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt is still in good condition and has good grip. Carpet with adjustable vacuum blower, allowing small parts to be securely held. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking. Extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed activation, eliminating the need for constant measuring with a caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts included. The four bellows have been renewed. Without the illustrated connecting cable. Dksdpfsyxg N Nsx Abaen Original paint, only a few spots have been touched up. Very good condition from a small company. Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (L x W x H). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm Dodecr S Ecopfx Abaekn feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price