Used Omc Ronda 700 for sale (5,814)

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop Cgodjhrukiopfx Aphow - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, Hot platen press Brand: OMC Type: PL 90s New machine Technical data Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel movement during the closing/opening of the plates. Elkom heating plate Elkom electric plates with electric resistors The plates consist of a chipboard on which an aluminum sheet with the electric resistors is mounted. Maximum working temperature 120°C. Maximum thrust = 7 kg/cm² Hydraulic system - The hydraulic system consists of a two-stage unit with submersible pump to reduce noise and lubricate the rotating parts. - Pump for fast closing/opening (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). - 2 HP electric motor - The hydraulic unit is equipped with the following control/safety valves installed on the tank: - Maximum pressure valve: prevents excessive pressure in the hydraulic system in the event of an electrical or electronic control fault - Pressure retention valve (check valve) - Valve for low drain pressure (pre-drain valve). It prevents dangerous shocks within the system. - Oil drain magnetic valve Control panel and electrical system The pressing parameters can be set on the control panel, which is equipped with the following switches/meters: - 2 temperature regulators for setting the plate temperature - Pressure gauge for pressure regulation with automatic pressure equalization system - General on/off switch - Two manual safety buttons for closing the press - Timer for automatic opening - Switch to select manual or automatic opening of the platens after the work cycle . - Off/on switch for upper and lower platen resistance Safety systems - Timed bimanual control for closing the press - Safety rope on the four sides of the press - Platen lock for maintenance - Protective guards for the pinion and rack units - Safety stickers and warning notices - Operating and maintenance manual - The press complies with CE standards Optional: Touchscreen display - Programmable logic controller 7-inch color touchscreen display specially developed for setting the following parameters - temperatures - pressing time - Daily setting of the heating system - automatic switch-off of the heating system when the set temperature is reached and automatic temperature recovery - new system for automatic pressure setting - Possibility to save historical data/parameters - Diagnostic system Sensor for checking the plate parallel stroke Anodized (anodized) surface on the 2 plates Electrical exclusion of 2 cylinders + sensors for parallel control Mylar film on panels Codpfx Apsyalmbshjgw Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top)

Year of construction: 2014, condition: ready for operation (used), laser power: 260,000 W, Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details. • Current application: TIG welding / tack welding • Original application: Laser system (currently disabled) • Tube diameter capacity: 219 – 1,500 mm • Tube thickness capacity: 3 – 12 mm Cgsdpfszdz Nxjx Aphew • Tube length capacity: 3,000 – 13,000 mm • Working system: 8 pushers (4 lateral + 4 upper) • Torch: TIG torch on front head • TIG wire diameter: 1.2 mm • Shielding gas: Argon • Machine control: External workstation with cycle start • Laser status: Laser element disabled in the current configuration Additional equipment • Former laser equipment available in stock: laser generator and extractor (can be included in the sale)

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Cgsdpodf S Eyofx Aphjw Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Country of manufacture: West Germany Type: manual bookbinding guillotine Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: Cgsdpfx Apjziwnhehow paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Cjdpfjziyyaex Aphsgw Made in Germany.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Cgsdsd H Hmhopfx Aphjw CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: like new (used), Chanber size: 280x180x500mm upper Csdpfx Asd Sm Dijphsgw 280x130x450mm lower Max temperature: 700 C °

Condition: excellent (used), Year of construction: 2022, Plate length - 2100 mm Plate width 1100 mm Press opening - 250 mm Pressure force - 90 t Number of cylinders - 6 Max working temperature - 120 °C Cylinder diameter70 mm Heating plates Cgedpfx Apewgl A Rohow Thermal oil Press with pistons at the bottom Side pressure cylinder - 4 Total connection power - 21 kW Excellent technical condition

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500 Cgjdpfxoy Nkuwe Aphjw

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Cgodjy Tu Rqjpfx Aphsw Weight: 615 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Codpjy N Rczefx Aphogw Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new Cedpfxoy Erwfe Aphogw - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system Cgodpfoqu U Hqjx Aphsw * machine control from touch panel * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection Cjdpjhrumajfx Aphegw

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation Cgedpsxx Tbpefx Aphew • Automatic pusher return • Suitable for high-pressure washing • CE compliant

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Hydraulic Press Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressing force: 105T Maximum heating temperature: 85 degrees Celsius Logic control system Machine control via a touch panel with readouts: Temperature, pressing force, platen opening time, load area calculation, process programming for gluing Power: 21KW CE certified Manufactured in 2022 Machine available on order Codpfx Apjimwp Sehogw Machine is new

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 W Hydraulic Veneer Press Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressure: 105T Maximum heating temperature: 85 degrees Cgsdpfx Apsiypzlohow Logic control system Machine control via a touch panel, displaying: Temperature, pressing force, shelf opening time, loading area calculator, glue process programming Power: 21KW CE certificate Manufactured in 2023 Machine available on order Machine is new

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8 Csdpfx Apov Akwgohogw

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Cgsdpoy Iv Iajfx Aphsw Timer for preheating water

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Cgodszdzmqspfx Aphjw Main motor power: 5.5 kW Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cgsdpfx Aozf H Szsphow Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8580

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Cgsdpfx Apex Dcpgshsw

Condition: like new (used), Year of construction: 2023, Weinig Powermat 700 6 spindle four-sided planer machine Cjdpfeziad Esx Aphsgw * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Powercom Plus

Condition: used, Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Handover: in its current condition as inspected -Condition: without drive motors / control unit, see photos -Welding swivel device: swiveling -Turntable: Ø 700 mm -Projection: 930 mm Cjdpjvmrf Tsfx Aphegw -Axles: 2 pieces -tiltable: via gearbox -Height adjustment: No -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg