Used Ona Qx4 for sale (1,458)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,350 kg, number of axes: 3, This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details. • Work tank dimensions (L x W x H): 1060 x 750 x 480 mm • Maximum workpiece weight: 1500 kg • Maximum electrode weight: 100 kg • Distance table to headstock: 200–600 mm • Voltage: 400 V • Frequency: 50 Hz • Current: 25.8 A • Power: 17.9 kVA • Minimum air supply: 6 bar Bwsdpfx Aljy Eq Ipj Ijl • Generator unit weight: 350 kg

Condition: used, Year of construction: 1992, Manufacturer: ONA-PRES, Model: EBd-100-4.5-AB, Year: 1992, Serial No.: P-01125, Maximum pressing force: 1,000 t, Table size: 4,500 x 2,700 mm, Ram stroke: 1,400 mm, Installation height: 800 - 2,200 mm, Table draw cushion: 60 - 250 t, Draw cushion stroke: 300 mm, Ram cushion stroke: 200 mm, Press control, additional control for ram, 5-piece cabinet assembly with accessories +++ Attention: This machine is part of an online auction! +++ Bsdex R Dx Eepfx Al Iswl

Condition: used, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 4,000 kg, table width: 700 mm, table length: 1,100 mm, Capacity: 120 Amp. – 19 kVA X-travel: 800 mm Y-travel: 600 mm Z-travel: 400 mm Table size: 1.100 x 700 mm Distance Head to table: 950 mm (max) Bwedpfx Asyg Hpdol Iol Oil tank: 1.700 x 1.000 x 650 mm Weight of workpiece: 4.000 kg (Max) Controller: CNC Datic S120

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.3 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details. • Auxiliary table travel (U/V): 80 x 80 mm • Maximum workpiece size (X/Y/Z): 1200 x 880 x 400 mm • Maximum workpiece weight: 850 kg • Taper cutting angle at 100 mm (Z): 18° • Maximum taper cutting angle: 30° • Wire characteristics (bare): Cu 63% / Zn 37% • Wire tensile strength: 900 N/mm² Bwjdpfx Aljy Dgrzo Ijl • Wire spool type: DIN 125 / DIN 160 • Guide type: Closed diamond • Position resolution (X/Y/U/V): 0.001 mm • Minimum programmable increment: 0.001 mm

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. • U/V axis travel: 140 × 140 mm • Maximum workpiece size (X, Y, Z): 1050 × 800 × 400 mm • Maximum workpiece weight: 3,000 kg • Taper cut angle (400 mm Z): 9° / 400 mm • Maximum taper cut angle: 30° / 100 mm • Wire spool types: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: closed diamond, high-precision, zero backlash • Positioning resolution (X, Y, U, V): 0.001 mm • Minimum programmable increment: 0.001 mm Bwodpex D D Taofx Al Iol • Wire cutter: yes • Automatic wire threading: yes Additional equipment • Water chiller / temperature control: yes • Water/sludge cleaning system: yes

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 250 mm, overall weight: 1,600 kg, number of axes: 3, This 3-axis ONA DB300 die-sinking EDM machine was manufactured in 2006. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 250 mm. The work table dimensions are 400 x 300 mm, with a maximum workpiece weight of 200 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA DB300 machine we have for sale. Contact us for further details. • Work table dimensions: 400 x 300 mm • Maximum workpiece weight: 200 kg • Maximum electrode weight: 30 kg • Tank dimensions: 800 x 500 x 320 mm • Dielectric fluid capacity: 300 liters • Maximum current: 30 A (standard) / 60 A (optional) • Control unit: ONA CNC (S64 / S94 series) • Power supply: 400 V / 50 Hz Additional equipment Bodpeylwq Aefx Al Ijwl • Automatic Tool Changer (ATC), optional (typically 4–12 positions)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, wire diameter (max.): 0.3 mm, overall weight: 2,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA AE 400 wire EDM machine was manufactured in 2005. It features a maximum workpiece dimension of 800 x 500 x 250 mm and can handle a maximum workpiece weight of 500 kg. The machine also includes a dielectric tank capacity of 600 liters. If you are looking to get high-quality wire EDM capabilities, consider the ONA AE 400 machine we have for sale. Contact us for further details. • U/V axis travel: 80 x 80 mm Bwodpoymal Eefx Al Ijl • Max. workpiece dimensions: 800 x 500 x 250 mm • Max. workpiece weight: 500 kg • Max. taper angle: ±20° (at 100 mm height) • Dielectric tank capacity: 600 liters

Condition: like new (used), Year of construction: 2025, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 800 mm, table length: 1,200 mm, Machine type: Die-Sinking EDM Machine Manufacturer: ONA Model: IRIS6 Year of Manufacture: 2025 Condition: As new – demonstration machine. Technical Data X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Table length: 1200 mm Table width: 800 mm Description Demonstration machine in a showroom – has not been used in production. ONA IRIS 6 X: 1000 mm Y: 600 mm Z: 500 mm C axis 360° Positioning resolution: 0.001 mm XYZ positioning resolution: 0.0001 mm Feed rate: 3000 mm/min Rapid traverse: 18000 mm/min Work tank dimensions: 1700*1000*600 mm Door type: automatic drop-down doors Table dimensions: 1200*800 mm Maximum dielectric height: 565 mm Maximum workpiece height: 515 mm Distance from head to table without C axis: 800 mm; with C axis: 760 mm Maximum electrode weight: 50 kg Bwjdpsy D R Sfefx Al Iel Maximum table load: 4000 kg Machine dimensions: 3300 x 3370 x 2930 mm Machine weight: 7400 kg 21" touchscreen color TFT display Generator: 100 A Maximum material removal rate with copper (mm3/min): 550 Maximum material removal rate with graphite (mm3/min): 660 Copper volume wear: < 0.10% Graphite volume wear: < 0.05% Filtration system: ONA eco self-cleaning long-life filter (no cartridges) Flushing: via central tool holder / tank – both programmable within 1–31 Additional equipment installed on the machine: - precision pressure measuring scales - central automatic lubrication system - C axis + automatic Erowa ITS 100 chuck - machine head prepared for vapor extraction - 9-position automatic tool changer - CNC access to shared files in Windows networks - machine file sharing in Microsoft Windows networks - 1650 liters of ONA dielectric fluid - ISL function – online diagnostics - dielectric chiller matched to 100A generator performance - 3 mm measuring probe

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Bwodpfsxr Uzwox Al Isl Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 300 mm MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg Bwedeyvlxwjpfx Al Ijl

Condition: good (used), ONA Poli Spark die-sinking EDM machine Type: IN 260 S2000-60A Bed: 410 x 645 mm Documentation included Machine dimensions: 160x130x215 cm LxWxH Cabinet dimensions: 130x95x210 cm LxWxH Bsdpfx Asq Eh Sksl Ijwl Cabinet dimensions: 60x70x170 cm LxWxH

Year of construction: 1992, condition: ready for operation (used), Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. Bwedpjp R R Idjfx Al Iol

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Bedsxwma Aopfx Al Iswl Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Machine weight: 2800 kg Bwedeyity Uopfx Al Isl Accessories: - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down.

Year of construction: 2012, condition: ready for operation (used), - USED - DOUBLE HEAD CNC DIE SINKING EDM X-AXIS TRAVEL: 3000 total - 2000 single mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 1000 mm RAPID FEEDS X-Y-Z: 2 - 2 - 7,5 m/min MAX ELECTRODE WEIGHT: 200 Kg MAX  PIECE WEIGHT: 20000 Kg TANK SIZE: 4000 x 2000 x 1250 mm TABLE SIZE: 3200 x 1600 mm TOOL MAGAZINE: 13+13 POS WEIGHT: 32550 Kg OVERALL DIMENSIONS: 6640 x 5800 x 4120 mm ACCESSORIES: C-AXIS NOTE: MAX PIECE HEIGHT 1130 mm Bjdpfx Alswl R A Hj Iswl

Year of construction: 1989, condition: good (used), Sell 2 sinker EDM machines Bwsdpfx Alehgrnho Iol Complete with filter, divider, tools, smoke evacuation

Condition: used, Year of construction: 1998, hollow 4000 m3/h volt 400 V Hz 50 KW 3 Bodpoyukfljfx Al Iswl weight 260 kg Electric air purifier The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1988, condition: used, Manufacturer: ONA Electro-Erosion, S.A. (Spain) Model: ONA-COMPACT 30 Year: 1988 Manufacturing Number: 5026/5912 Bwjdpfx Alowf E Auj Iel Registration Number: 5026/8812 Type: Electrical Discharge Machine (EDM) - Die sinking Voltage: 220 V Current: 5.6 A Pulse Power: 2 x 0.75 HP Apparent Power: 2.13 KVA Frequency: 50/60 Hz Estimated Table Travel: 300 x 200 mm Dielectric Tank Capacity: 100-150 L Approximate Weight: 1000-1200 kg

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Bsdpfsvn Tg Isx Al Iowl Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Bwsdpfxeu Thhrj Al Iel Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61MH16062525487 / E11MH15102480183 / DT1UE15055010409, This listing is for the Rational CMP 61 / CMP 101 combi steamers as a duo system. The units have been fully refurbished in our in-house workshop and are in full working order. As shown, the offer includes the combi steamers with UltraVent condensation hood and a mobile base frame as a complete package price. The two Rational units beside the duo system are not included in the offer. Total tower height: 2125 mm The duo system can be disassembled for transport if required. You will receive an invoice including VAT. Service: We are happy to help you find a certified Rational service provider nationwide in Germany. Looking for a specific Rational model? Contact us— we have access to a large range of new and used Rational equipment. We offer expert advice on all models, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. The CombiMaster® Plus by RATIONAL is built to last and impresses with features that guarantee the highest food quality. It supports the chef’s individual skills with precise control of the cooking chamber climate, as well as exact settings for temperature, humidity, air circulation, and cooking time. Technical data UltraVent condensation hood: (9261) W x D x H: approx. 854 x 1226 x 470 mm Minimum door opening for transport W x H: 845 x 1050 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: DT1UE15055010409 Condition: used, refurbished, fully functional Technical data combi steamer CMP 61 (9257) Serial number: E61MH16062525487 Year built: 2016 Bsdpfx Aljy I Tuds Iowl Suitable for: 1/1, 1/2, 2/3, 1/3, 2/8 GN containers Capacity: 6 x 1/1 GN Meals per day: 30-80 Width: 847 mm Depth: 776 mm Height: 782 mm Minimum door opening for transport W x H: 845 x 850 mm Weight: 103 kg Electrical connection: 3-phase 400 V / 10.0 kW / 50/60 Hz Condition: used, refurbished, fully functional Technical data combi steamer CMP 101: (9260) W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening for transport W x H: 845 x 1050 mm Power connection: 400 V / 18.6 kW / 50-60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH15102480183 Year built: 2015 Condition: used, refurbished, fully functional Further information: Applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Brings pre-prepared and chilled foods up to serving temperature in an optimal climate Automatic fat separation for clean cooking chamber air Manual cleaning program 5 fan speeds: From sensitive to robust, the CombiMaster® Plus has the right airflow for every product Double-glazed, ventilated door (swiveling for easy cleaning) LED cooking chamber lighting Core temperature probe Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Hand shower with automatic retract Dynamic air circulation If you have questions, need advice or would like to view something in person, you can reach us by phone during our business hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Year of construction: 2023, condition: refurbished (used), functionality: fully functional, The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombi Pro 6.1/1 Electric model with 6 GN 1/1 shelves is easy to operate even for untrained staff, as you can achieve outstanding cooking results without the need for constant supervision. The ultra-fast interim and self-cleaning functions keep your unit spotless. The combi-steamer has a left-side door hinge. This unit has been overhauled in our in-house specialist workshop and is fully functional. The stand shown in the photos is not included in the offer but can be purchased at an additional cost if required. The images are sample photos; actual pictures will follow soon. You will receive an invoice with itemized VAT. Service: We are happy to help you find a certified Rational customer service partner throughout Germany. Are you looking for a specific Rational device model? Ask us—we have access to a wide range of used and new equipment. We are happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. Our equipment service for you includes: - 6 months' warranty on electrical parts (limited to the replacement of defective parts, excluding labor costs) - High-quality branded equipment at fair prices - Professional and expert advice—before and after the purchase Bjdpfx Alsy I S I As Iewl - Flexible options for shipping or self-collection - Provision of operating manuals, wiring diagrams, and spare parts - Complete accessory program at attractive prices The iCombi Pro by Rational sets a new standard in terms of intelligence, efficiency, and flexibility. Technical data: Dimensions (W x D x H): 850 x 842 x 754 mm Minimum doorway size for delivery (W x H): 800 x 800 mm Serial number: E61SJ23053061387 Year of manufacture: 2023 Max. load per shelf: 5 kg Max. total load: 30 kg Weight (electric device): 99 kg Electrical connection: Voltage: 3 NAC 400 V Connected load: 10.8 kW Steam operation output: 9 kW Hot air output: 10.25 kW Fuse: 16 A Water connection requirements: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Condition: Used, refurbished, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations by special arrangement only Subject to changes and errors Do you have questions, need advice or want to view the equipment on-site? You can reach us by phone during our business hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively under our General Terms and Conditions (GTC).

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Bwodpfxsy I Ua Ij Al Ijl Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface Bsdoif Ek Rspfx Al Ijwl • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization Bwjdpfsfnlkwox Al Ijl (Product photo as an example) The machine is CE certified.