Used Optimum Tx5216V Vario for sale (1,023)

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP Ljdpfjx Hdq Tex Aifsrp - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Lrsdpfxjznh Nmo Aifjp Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW Lsdpefbh Aksfx Aifjrp weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm

Condition: new, Year of construction: 2026, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: continuously variable, 120 - 3000 min⁻¹ Ljdpfxezhm D Aj Aifsrp Spindle mount: MK-4 Drilling stroke: 120 mm Spindle overhang: 254 mm Table size: 475 mm x 425 mm Tilting/rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change toolholder: 1 - 16 mm Weight: 132 kg

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Speed range Lredpfsg Uaiusx Aifjp Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Weight approx. 522 kg Electrical data Ledpfogd Si Eox Aifjrp Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Lrodpfx Asdqzbnoifop Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Ledpfx Aiecnxrcefsrp Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Lredsg U Uv Uepfx Aifjp Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Lrodpfxsv Sg T Ns Aifep Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: ready for operation (used), Year of construction: 2016, controller manufacturer: SIEMENS, overall weight: 6,020 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Optimum F310 vertical machining centre was manufactured in 2016. It features a maximum spindle speed of 10,000 rpm and a spindle motor power of 13 kW. The machine is equipped with a CNC-controlled dividing head with 2 rotary axes, which has never been used. If you are looking to get high-quality machining capabilities, consider the Optimum F310 machine we have for sale. Contact us for further details. • Total connected load: 25 kW • Power supply: 400 V / 50 Hz • Spindle status: Repaired; cover not reinstalled • Machine status: Under power Lrsdpfx Aezl Edvoifop Additional equipment • CNC-controlled dividing head (rotary table) with 2 rotary axes; never used

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - Lrsdpfx Aiju R Tftofsp This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. Lrodpfx Ajzgci Soifop VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Lodeyglkyjpfx Aifjrp Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Lodpfx Aiezmx Nbjfjrp Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe Lrodpfx Aiezd Eqyjfsp -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Ledpfx Aiezi Ex Usfjrp Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Lrodpfezi Evgex Aifop Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Lsdpszi Er Iofx Aiforp Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 230178, Used drilling and milling machine Optimum OPTI F30 Drilling capacity: 32mm Lodpfxezmwglj Aifsrp Face milling cutter: 76mm Shell milling cutter: 20mm Overhang: 205mm Max. distance to table: 480mm Taper: MK3 Spindle travel: 130mm Tailstock diameter: 75mm Swivel range: 360° Spindle speed range: 100-2,080 Overall height: 1,100mm Overall length: 1,080mm Overall width: 1,010mm 1.5 kW, 400V Includes collet set and chuck as shown in the picture. The machine can be inspected under power at our location in Chemnitz at any time.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, total height: 2,200 mm, total width: 2,164 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 100,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Optimum Optimill F105 was manufactured in 2015. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle power of 7.5 kW and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F105 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 10,000 mm/min • Work table size: 800 × 320 mm Technical Specification Lrjdpfxozg Ecbs Aifop Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 550 mm, total height: 2,000 mm, total width: 1,870 mm, overall weight: 3,200 kg, controller manufacturer: SIEMENS, product length (max.): 4,050 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2015. This Optimum OPTIturn S 600 features a turning diameter of 320 mm and a turning length of 550 mm. It includes a hydraulic turret with 12 tool slots and a spindle speed range of 30 – 4000 min¯¹. If you are looking to get high-quality turning capabilities, consider the Optimum OPTIturn S 600 machine we have for sale. Contact us for further details. • Turning diameter: 320 mm • Turning length: 550 mm • Swing diameter above machine bed: 550 mm • Swing diameter above cross-slide: 370 mm • Main spindle bore: 76 mm • Spindle bore with hydraulic chuck: 200 mm • Spindle taper: A2-6 • Drive motor output: S1 (continuous) 11 kW; S6-30% 14.3 kW • Turret type: Hydraulic VDI 30 • Number of tool slots: 12 Lredpfxszg Eams Aifsp • Rapids movement X/Y-axis: 30/36 m/min • Tailstock chuck: MT4 • Quill stroke: 80 mm • Quill diameter: 75 mm • Total rated value: 30 kVA Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Lrodpfx Aiew Rhk Rsfjp Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Model: F 150 Machine type: 3-axis CNC machining center Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Spindle power: 12 kW Spindle power S1: 9 kW Lredpfxoy Ia Uwo Aifep Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Integrated automatic tool changer Integrated chip conveyor Machine weight: approx. 3,520 kg

Condition: like new (used), Year of construction: 2018, Manufacturer: Optimum Maschinen Germany GmbH Model: L34HS Serial Number (SN): 11261804002 Machine Type: Flat-bed CNC Lathe Year of Manufacture: 2018 Motor Power: 3.7 kW Power Supply: 400 V / 50 Hz Spindle Speed Range: approx. 30 – 3500 rpm Maximum Spindle Speed: 3500 rpm Maximum Turning Diameter: approx. 350 mm Turning Diameter over Cross Slide: approx. 146 mm Distance Between Centres: approx. 600 mm Travel X/Y/Z-Axis: approx. 185 / 185 / 540 mm Taper / Mount: MT 3 Ljdpfjy Ia Uqjx Aifsrp Weight: approx. 1200 kg