Used Pharmatec Multistage Pressure Column Distillation for sale (18,458)

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph Tsdpsyfhtnofx Al Aoc

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Tjderl U S Espfx Al Ajc Not a submersible pump or submersible pump

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Tedpfxefupado Al Ajc Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, This listing is for the Cytiva Axichrom 140/300 chromatography column The unit is in full working condition and ready for immediate use This high-performance, low-pressure axial compression column is engineered for predictable bioprocess scale-up and efficient purification. It supports automated column packing workflows with modern chromatography resins to ensure reproducible, high-quality bed consistency and separation results. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Tedpfxszqf Hns Al Asc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: used, This listing is for AxiChrom 140/500 Chromatography Column The unit is in full working condition and ready for immediate use This low-pressure chromatography column features an inner diameter of 140 mm and a maximum bed height of 500 mm. Designed for pilot-scale bioprocess development, it utilizes automated Intelligent Packing technology to ensure highly reproducible packing, reliable scaling, and optimal sanitisation. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. Tsdpfezqf Huex Al Asc – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: used, This listing is for Cytiva Axichrom 70/500 Chromatography Column Tsdpfx Aszqf Ewsl Aec The unit is in full working condition and ready for immediate use This low-pressure chromatography column features an automated packing design, ensuring optimal bed stability and reproducible purification runs for pilot and production-scale bioprocessing workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Tedpfx Aloz Hl A Eo Asc Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: used, This listing is for Axichrom 140/300 Chromatography Column The unit is in full working condition and ready for immediate use This premium low-pressure axial compression column features a 140 mm inner diameter and 300 mm max bed height, ideal for pilot-scale biopharmaceutical development. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. Tedpfx Aezi Alljl Aoc – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: used, This listing is for Cytiva Axichrom 70/500 Chromatography Column The unit is in full working condition and ready for immediate use This low-pressure chromatography column features an automated packing design, ensuring optimal bed stability and reproducible purification runs for pilot and production-scale bioprocessing workflows. [ Tsdpjzqf E Dsfx Al Ajc Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm Todpfew U Tlzsx Al Aec RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Tjdpfxjz A R Ire Al Ajc Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: new, Year of construction: 2020, functionality: fully functional, BOSCH Pharmatec CIP System 8X0400 – Never Used – GMP Pharma Version For sale is a complete BOSCH Pharmatec CIP (Cleaning in Place) system in new condition (Never Used). The system was manufactured in 2019/2020 but was never put into operation. Since delivery, it has been stored professionally and is in excellent condition. The system was developed according to the highest GMP standards and is ideally suited for the pharmaceutical, biotechnology, vaccine, and food industries. Technical Data Manufacturer: Bosch Pharmatec GmbH (now Syntegon) Todpfozpy Nzex Al Aec Type: CIP Unit 8X0400 Year of Construction: 2019 / 2020 Condition: Never Used / New GMP Version Stainless Steel Design CE Marking Immediately available Scope of Supply BOSCH Pharmatec CIP Unit 8X0400 Stainless Steel Water Tanks CIP Satellites Complete Pump Skids KPA Hygienic Pumps Endress+Hauser Measuring and Control Technology Hygienic Stainless Steel Piping Valves and Fittings Heat Exchangers Original Bosch Documentation P&ID Flow Diagrams Layout Drawings and Technical Documents Important Note The system is offered without pneumatic components and without control (automation). This allows the system to be individually adapted to the buyer's requirements and equipped with a modern PLC, pneumatic, and automation solution as desired. This offers maximum flexibility for new installations or integration into existing production facilities. Application Areas Pharmaceutical Industry Biotechnology Vaccine Production Sterile Production Facilities API Manufacturing Supply of Purified Media GMP Production Plants Contract Manufacturing (CMO) Advantages Original Bosch Pharmatec Quality Never Put Into Operation High-Quality GMP Version Complete Technical Documentation Available Flexible Retrofitting of Control and Pneumatic Technology According to Customer Requirements Immediately Available Significantly Cheaper Than a Comparable New System The system can be inspected by appointment. We will gladly send you further photos, technical documents and drawings upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet Tjdpozp Ex Ujfx Al Aoc ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. Tedpfx Aou Nfibel Asc - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Tedpfx Alsy Sazfj Ajc Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Tedpjyfwxtofx Al Aoc Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve Todpfoyfwywsx Al Aec - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Tjdpod Swtaefx Al Asc Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: new, pressure 400 t distance between columns 600 mm stroke 600 mm Tedpjzyvakefx Al Aec table-size 3000 x 1500 mm travel x / y 2200 x 900 mm working feed 7 mm/sec tank capacity 66 l working pressure 30-250 bar total power requirement 18,5 kW weight of the machine ca. 25 t dimensions of the machine ca. 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Tedpfx Alsu Nfins Aec Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW Tsdpevt Nvpofx Al Aoc weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. Tjdou N A U Iepfx Al Aec 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, workpiece weight (max.): 15,000 kg, Equipment: rotational speed infinitely variable, FPT Moving Column Milling Machine mod. RONIN CNC Control Heidenhain 530 X axis 8,000 mm Y axis 1,500 mm Z axis (vertical) 2,500 mm Rapid traverse 35,000 mm/min Feed rates 15,000 mm/min Automatic bi-rotational milling head (continuous) – TUPC Spindle taper ISO 50 Max spindle speed 7,000 rpm No. 1 ROTOTRASLATE TRT TABLE Hydrostatic Dimensions 2,000 x 2,000 mm Travelling V axis: 1,500 mm Tedpowzxwqjfx Al Ajc Max load capacity: 15 tons No. 1 ROTARY TABLE Dimensions 1,500 x 1,500 mm Max load capacity: 15 tons Tool changer with 80 positions Total installed power 88.8 kW Equipped with: - Internal high-pressure through spindle: 20 bar - External high-pressure coolant: 4 bar - Chip conveyor - Remote CNC Heidenhain wireless control pendant - Laser probe and software for tool integrity check, tool length & radius measurement - Workpiece measurement and alignment probe USED MACHINE

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm Tedpfx Aeu Nfnksl Aec drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m Tjdpfx Aju Nfklel Ajc further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *