Used Plasma Torch Accessories 126 Pieces Extensive Range for sale (46,700)

Condition: excellent (used), Cutting nozzle, welding torch, plasma torch, hand arc piercing torch, gouging torch, torch accessories, torch nozzles, cutting nozzles, flame cutting system, torch -Manufacturer: Hypertherm, extensive range of plasma torch accessories unused Ovp -Type/Quantity: see photos / parts list -Ring electrode: iht 6534-1-100 3 pieces -Price/Delivery: complete -Transport dimensions: 360/280/H165 mm -Weight: 3.8 kg Gjdjw Ud Dbopfx Aayskb

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Gjdpszy Itvsfx Aayskb Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Gkedpfxozxqhyo Aayjb Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled Gkjdpeyah R Njfx Aayeb - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Gedpfxoyah Saj Aayokb Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Godjdzqccjpfx Aayokb Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Gedpfxex Ek Rdj Aayokb Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: used, Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm Godpfeh Uhliox Aayjkb -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive Godpfsw Dvv Aex Aayjkb - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center Gkodpedz Spwofx Aayjb - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) Gksdpfx Aaoy E Nxgsyeb ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Gjdpjdzqa Hefx Aayskb Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat, poultry or fish. Can also be used for cheese, vegetables and fruit. Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 3,000 kg/h depending on product. Gedpexfll Tofx Aayokb ✅ Product temperature range - -3C to +60 C. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. ✅ Condition - very good, last used in June 2025.

Condition: used, Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available Gedpfx Ash Uuz Soayokb -Price: complete -Total weight: 0.2kg

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. Gksdpfx Aajzizkyeyeb To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Gkedeyazhzjpfx Aayeb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Dimensions & Capability Cutting Area / Table Size: 2,500 mm x 1,200 mm Gkodszy I S Eepfx Aayjb Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications Gkedpey E Nykofx Aayjb PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) Gsdpfx Aajvpalaeyokb ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Gkjdpfxezpf U Ns Aayob Immediately available

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013. Godotp Dhpspfx Aayjkb

Condition: good (used), functionality: fully functional, Internal article number: 26059 Mechanic's lathe Weiler Including an extensive accessory package + Four-jaw chuck Röhm 140 + Three-jaw chuck Röhm 140 + Collets "large" + Draw tube for tailstock (suitable for collet set "large") + Collet set "small" and draw tube for tailstock + Turret head + Parting tool support + Hand lever support with Multifix "A" base (installed) Speed adjustable via belt 2 speed stages Left-hand/right-hand rotation Dimensions (L x W x H): 120 x 50 x 125 cm Weight: 500 kg Gsdpozx Tt Sjfx Aayskb The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running on our heated storage area of over 500 m².

Condition: like new (used), functionality: fully functional, extraction nozzle diameter: 300 mm, Two exhaust fans in like-new condition are for sale. They ran very little. They can be tested on-site. The price is for the pair. Gkodpfxezz Scwo Aayeb The intake diameter is 300 mm. The motor power is 11 kW.

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Godowmqwyopfx Aayjkb

Condition: excellent (used), FARO Gage Plus F4 3D Coordinate Measuring Arm Manufacturer: FARO Model: Gage Plus F4 Machine Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 For sale is a used FARO Gage Plus F4 3D coordinate measuring arm with CAM2 SmartInspect Pro software and a comprehensive range of measuring, tooling, and accessories. This mobile measuring arm is suitable for industrial measuring and testing tasks, quality assurance, as well as the acquisition and control of component geometries. Technical Data: Model: Gage Plus F4 Device Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 Accuracy Specification: 5 + 8L/1000 µm Certification Date: 12.06.2019 Country of Manufacture: Switzerland Software: FARO CAM2 SmartInspect Pro Software key as shown in the images USB stick as shown in the images Equipment: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the images Measuring and probing accessories as shown in the images Tool and accessory case FARO protective cover Documentation / documents as shown in the images Additional accessories as shown in the images Dimensions: Dimensions of the measuring arm: not clearly specified Gkedpfx Aaszxy Sbjyjb Transport Data: Transport dimensions: not clearly specified Weight: not clearly specified Shipping or freight forwarding possible Condition: Used Optical condition as shown in the images. Nameplate present. Scope of delivery: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the images Tool and accessory case Measuring and probing accessories as shown in the images FARO protective cover Documentation / documents as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.