Used Potentiometer for sale (198)

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 Redpjn Tvbrofx Abgjw -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Condition: excellent (used), Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer -Manufacturer: Siemens, unused potentiometer in original packaging -Type: ASZ12.803 Rjdpfx Ajgh Ixhsbgjw Quantity: 1 piece available -Dimensions: 65/50/H30 mm -Weight: 0.05 kg

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, potentiometer unused Ovp -Type: ASZ12.30 -Number: 3x potentiometers available -Price: per piece -Dimensions: 40/35/H20 mm -Weight: 0,05 kg/piece Rodpfxegh Ixle Abgow

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, double potentiometer -Type: ASZ22.30 -Number: 12x potentiometers available -Price: per piece -Dimensions: 35/20/H40 mm -Weight: 0,05 kg/piece Rsdpjgh Iw Isfx Abgsw

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Jorg swiveling bending machine Type: 3944 Capacity: 2050 x 3.2 mm Adjustable back gauge Complete set of blades Corner adjustment with potentiometer Rodpfxszgtk Ho Abgjw

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: B29779, year of last overhaul: 2026, TRANSPAK TP 702 Inox automatic strapping machine, arch 650 x 500, 8 mm strapping, speed of 50 straps per minute, automatic strapping feed and ejection, adjustable tightening tension via potentiometer, cycle start via foot pedal or button, year 2021. Rjdpezidnzefx Abgjw

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, year of last overhaul: 2026, Transpak TP 702 automatic strapping machine, Year 2018, Refurbished machine, in very good working condition. Rsdpfxjzidgws Abgjw Strap arc width: 850 mm Strap arc height: 600 mm Cycle rate: approximately 50 cycles per minute Automatic strap feeding and ejection Adjustable strap tension via potentiometer Strap width: 12 mm Cycle start via button or foot pedal.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23003018 503, year of last overhaul: 2026, Strapack SQ800 automatic strapping machine, large arch design, arch dimensions 1850 x 500 mm, 12 mm strapping, automatic strapping feeding and ejection, electronic tension adjustment via potentiometer, approximately 40 cycles per minute, automatic lubrication system, adjustable table height, cycle start via button or foot pedal, year 2023, new condition. Video available upon request. Rsdezidbhjpfx Abgow

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2026, Mosca ROM Fusion automatic strapping machine, arch size 600 x 500, 5 mm strapping, automatic strapping feed and ejection, adjustable tightening tension via potentiometer, speed of 50 to 55 cycles per minute. Double foot pedals. Year 2013. 2 machines available. Video available upon request. Rsdpfx Abozic Dzsgow

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor Redpfx Ajv Ha Uiobgow 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Agitator flange on the top -2x handle for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Redpfx Aeh Hxxfobgow Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Rsdpfx Aboy E Avlsgow Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Redjzhbf Uspfx Abgjw Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam Redpfx Abow Nafkogsw - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank Rodpfx Abowx Aadegew - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Rsdpfxsx D E Huj Abgew Extra Information The equipment is in like-new condition because the project for this purchase never machine has a maximum of 200–300 operating hours. We’ve only conducted some test runs and the like here. It hasn’t been used in series production for specific projects. So it’s basically in “like-new” condition.A Touch Sense Cap has also been integrated for the UR 10e robot. The interface is Ri Mod. The welding machine is equipped with: Welding Package Standard, Pulse, PMC, CMT, Cycle Step, and WireSense This allows for welding of all weldable (arc) materials. Seam detection can be performed via gas nozzle position, wire end, and WireSense.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm Rjdpfex R Uw Sox Abgow * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: new, Like-new HBM AE501 clip-on electronics measuring amplifier from stock, NOS (New Old Stock). Industrial electronics module for measurement and automation technology. Manufacturer: HBM Model: AE501 Series: Clip-on electronics Device type: Measuring amplifier Condition: NOS New Old Stock / New from stock Redpfxjzfi Ryj Abgjw Application area: Industrial measurement technology Suitable for: Strain gauges and load cells Mounting type: DIN rail Design: Clip-on electronics module Accuracy class: 0.1 Protection class: IP65 Adjustment: DIP switches and potentiometers Signal processing: analog Suitable for measuring: Force, torque, displacement and weight Industrial version: Clip IG Application area: Automation and testing technology Available quantity: 11 pieces.

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Rjdpfxjy Hlx Es Abgjw Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table length: 550 mm, table width: 320 mm, table load: 400 kg, spindle mount: MK 2, total height: 1,750 mm, drill spindle length: 130 mm, total length: 1,400 mm, total width: 1,400 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 3,000 rpm, distance between stands: 600 mm, quill travel distance: 130 mm, quill stroke: 130 mm, space requirement width: 2,100 mm, spindle motor power: 550 W, workpiece weight (max.): 400 kg, overall weight: 1,600 kg, number of previous owners: 2, Equipment: rotational speed infinitely variable, Special price due to retirement and business closure! HENRI HAUSER OP3 – Unique piece / excellent condition! (Bienne/Biel, Switzerland) This quality will never be produced again! Coordinate drilling machine / precision drilling machine with tool package in excellent, exceptional condition, second-hand (owned for 41 years). The coordinate drilling machine features the rare option of motorized table drive in the X and Y axes with potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has the rare thermal stabilization and expansion compensation feature. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and dimensional precision. This explains the factory-specified high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage when drilling and milling precisely in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly likely no longer available. Those familiar with these machines, which are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing, and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction/overhaul, technical universities and training, materials technology, special machine construction, etc. Rsdpfoy Sx Nhox Abgsw All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Machine dimensions: Length = 1200 mm, Width = 1150 mm, Height = 1650 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net, export within the EU. Fair offers are welcome!

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Rjdpfx Aszd S Rysbgsw Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 6 kg, The H-IRB 6T is a high-precision, belt-driven horizontal balancing machine designed for small rotors and shafts. It combines compact efficiency with industrial-grade reliability. Redpfszfbh Djx Abgjw Maximum Rotor Weight 6 kg (13.23 lb) Minimum Rotor Weight 0.1 kg (0.22 lb) Maximum Rotor Diameter 300 mm (11.81 in) Minimum Shaft Diameter 4 mm (0.16 in) Maximum Shaft Diameter 25 mm (0.98 in) Motor Power 0.4 kW (Servo System) Maximum Balancing Speed (Adjustable via potentiometer) 0 – 10,000 RPM Drive Unit Belt Bed Length 400 mm (15.75 in) Machine Weight 500 kg (1102.3 lb) Min. Achievable Residual Unbalance 0.1 g·mm/Kg Cycle Time 8-30 s Software MBS IBalancer v2.8 Language English Processor Intel-based processor OS Windows 11

Condition: excellent (used), Year of construction: 1993, Spindle mount, vertical SK 30 Speed range 265 – 3000 rpm Drive power 1.5 / 2 hp Spindle mount, horizontal SK 30 Speed range 50 – 1500 rpm Drive power 3 / 4.2 hp Table clamping surface 800 x 200 mm Longitudinal travel X-axis, automatic approx. 550 mm Transverse travel Y-axis, automatic approx. 175 mm Vertical travel Z-axis, automatic approx. 400 mm Distance between table and milling spindle 300 mm Feed speeds, stepless 30 - 340 mm/min Rapid traverse yes Dimensions L x W x H approx. 1300 x 1200 x 2050 mm Weight approx. 900 kg Accessories / Special features: • 3-axis digital display ELESTA Visulesta 2E Rsdpfxezbikmo Abgow • Vertical milling head SK 30 with high speed of 3,000 rpm + boring quill, swiveling left-right • Horizontal milling attachment SK 30 • Rapid traverse + feed in all 3 axes, feed steplessly adjustable via potentiometer on the control panel • Rotary table that can be swiveled left-right with drive capability for a dividing head • Coolant system • 2-stage main motor • Central lubrication This very good GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2022, Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz Year of manufacture: 2022 - used Complete in standard version with: - Fully automatic electronic control system with program selector switch COILING-GLUING-DRIVING IN - Dowel feed via electronic vibrating conveyor with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection by electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with Rsdpfx Aszbyu Ajbgjw EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 pistol for dowels Ø 8 mm, dowel length 25 - 40 mm Drive-in overhang 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2019, Mössner Rekord SSF 801 Band Sawing Machine The most powerful Mössner band saw—deployed when peak performance is required. Rjdszc Uvwopfx Abgew The ultimate flagship among vertical high-performance band sawing machines. This machine stands for maximum precision, exceptionally smooth operation, and uncompromising durability in continuous industrial use. Standard Band Saw Equipment Band saw stand with robust grey cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer; 2-speed gearbox OR infinitely variable cutting speeds with flange bearing and frequency converter Manual blade tensioning device with hydraulic indicator Tiltable work table – 30° to the right, 15° to the left Replaceable aluminum band wheels with hard rubber facing Adjustable upper band wheel Safety door switches on the band wheel doors Finish: RAL 7035 Light Grey; doors RAL 5005 Signal Blue Technical Data: Manufacturer: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Band wheel diameter: 800 mm Max. cutting width (throat depth): 785 mm Max. cutting height: 670 mm (optionally extendable to 800 mm) Table size: 960 × 1000 mm Max. table load: 750 kg Motor power: 11 kW Cutting speed (gearbox): 26 – 180 m/min and 290 – 2000 m/min Cutting speed (flange bearing): 500 – 2000 m/min Machine weight: approx. 2,300 kg Dimensions (L x W x H): 2240 x 1080 x 2900 mm Year of manufacture: 2019 New price: €54,000 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!