Used Presona Ab Baler 60 T for sale (83,746)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Lodpfx Ajzdny Rec Asrn Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), spindle mount: MK 4, drilling depth: 235 mm, actuation type: manual, rotational speed (max.): 1,250 rpm, rotational speed (min.): 32 rpm, total width: 950 mm, total length: 1,500 mm, total height: 2,400 mm, throat depth: 390 mm, table width: 840 mm, table length: 670 mm, overall weight: 1,200 kg, thread cutting capacity: M 30, Equipment: quick-change device, Heavy-duty column drilling machine, drilling capacity Ø 60 mm, table size 840x670 mm, motor 4.0 / 5.5 kW, 16 spindle speeds 32 - 1250 rpm, quill travel 235 mm, MK-4, throat 390 mm, dimensions 950x1500x2400 mm, weight approx. 1200 kg, electric tapping device, 5 feeds, machine lamp, coolant system, depth stop, BILZ quick-change system, various accessories in cabinet. Lrsdpfx Acsylyqxs Aen

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. Lredpfx Acov T I Evs Asn The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Lsdpsy Hgnhofx Ac Ajrn Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH Lodpfx Acoymmmps Asrn

Condition: good (used), mileage: 16,714 km, first registration: 11/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,370 mm, total width: 1,930 mm, total height: 2,050 mm, loading space length: 2,700 mm, loading space width: 1,650 mm, loading space height: 1,310 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 987 kg, Unladen weight: 2213 kg, Gross vehicle weight: 3200 kg, Alloy wheels, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Roof rack: None, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, XL Vebabox with automatic transmission, Tire type: Winter tires = Additional Information = Axle configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Lsdeyzmh Rjpfx Ac Asrn Weights Unladen weight: 2,213 kg Payload: 987 kg GVW: 3,200 kg Functional Height of loading area: 55 cm Maintenance APK (Technical Inspection): valid until 11/2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 530 € per month (delivery van, 72 months); Ask for more information and conditions Identification License plate: V-12-JBG

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Lodpfx Acer Nrbto Aern

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Lredpfoxq Tq Iex Ac Ajn

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mega - Ultra LowLiner Saddle height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Passenger seat fixed Without upper bunk Warm air parking heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) SAF fifth wheel, saddle height 980 mm, tires 295/60 R22.5, Bridgestone 4-bellow air suspension (rear axle) Light-colored dashboard Window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Saddle height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Diesel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assistant Emergency brake assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver’s seat (high-quality upholstery) Parking heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilting system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Automatic lighting Leather-covered steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side skirts Side fairings Onboard internet Lsdpfxeyvm Nwe Ac Aorn

Condition: used, mileage: 1,595 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bellow air suspension, 1200mm, 315/80, final drive ratio 2.47, CB radio pre-installation, sun visor, LED, retarder, NH4C, side trim panels, Technology Package 4 Cab paint: Moondust Silver Fixed passenger seat Without upper bunk Hot air auxiliary heater Navigation Electro-hydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bellow air suspension (rear axle) Light-colored dashboard Window decals, 4-bellow air suspension, 980mm, LowLiner, 355/50, final drive ratio 2.31, Winter Package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Coupling height 980 Front overhang 1450 Rear overhang 873 Overall length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 L SCR tank Diesel tank 372 liters 600 L main tank Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane departure warning Emergency braking assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (high-quality upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automatic system Leather-wrapped steering wheel Multifunction steering wheel switches 8" instrument cluster Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts On-board internet Lrjdpfx Aceyvm Nqj Asn

Condition: used, mileage: 545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Fifth wheel height: 1150 mm, FROZEN WHITE - 7VTAWWA, retarder, parking air conditioning, 385/55, final drive ratio 2.31, sun visor, LED, retarder, NH4C, side fairings, Technology Package 4. Cab paintwork: Frozen White. Co-driver's seat fixed, without upper bunk, warm air auxiliary heater, navigation system, electrohydraulic steering with three drive modes (Comfort, Balance, Direct). 4-bellow air suspension (rear axle). Light dashboard, window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, final drive ratio 2.31, winter package with heated windscreen, sun visor, LED, retarder, air horn, Technology Package 5. F-MAX F-MAX LL F-MAX L. Wheelbase: 3600 mm. Saddle height: 980 mm. Front overhang: 1450 mm. Rear overhang: 873 mm. Overall length: 5907 mm. Total cab length: 2350 mm. Overall height: 3950 mm. Overall width (without mirrors): 2540 - 2160 mm. 78 LITER SCR TANK. Diesel tank: 372 liters. 600 LITER MAIN TANK. Ground clearance front: 269 mm. Ground clearance rear: 243 mm. ConnecTruck, cruise control, lane departure warning system, emergency braking assistant, axle load display, electronic stability program (ESP), traction control (ASR), Eco Roll, differential lock, driver’s seat (premium upholstery), auxiliary heater, ConnecTruck, MaxCruise (predictive cruise control), electric tilting mechanism for the cab, LED daytime running lights, maneuvering assistance lighting, fog lights and rear fog lights, light automation, leather-covered steering wheel, steering wheel controls, 8" instrument panel, multimedia system with 7.2" touchscreen, externally mounted sun visor, roof spoiler, side spoilers, side skirts, onboard internet. Lrodpfx Acsyvm Iyo Ajn

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mega - Ultra LowLiner Fifth Wheel Height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB Radio Preparation, Sun Visor, LED, Retarder, Air Horn, Technology Package 4 Cabin Paint: Moondust Silver Passenger Seat Fixed Without Upper Bed Hot Air Auxiliary Heater Navigation Electrohydraulic Steering with Three Drive Modes (Comfort, Balance, Direct) SAF Fifth Wheel, Coupling Height 980 mm, Tires 295/60 R22.5, Bridgestone 4-Bag Air Suspension (Rear Axle) Light-Colored Dashboard Window Decals, 4-Bag Air Suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter Package with Heated Windshield, Sun Visor, LED, Retarder, Air Pressure Horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Fifth Wheel Height 980 Front Overhang 1450 Rear Overhang 873 Total Length 5907 Total Cabin Length 2350 Overall Height 3950 Overall Width (without mirrors) 2540 - 2160 78 L SCR Tank Diesel Tank 372 Liters 600 L MAIN TANK Ground Clearance Front 269 Ground Clearance Rear 243 ConnecTruck Cruise Control Lane Keep Assist Emergency Brake Assist Axle Load Display Electronic Stability Program (ESP) Traction Control (ASR) Eco Roll Differential Lock Driver’s Seat (High-Quality Upholstery Fabric) Auxiliary Heater ConnecTruck MaxCruise (Predictive Cruise Control) Electric Cab Tilting Device LED Daytime Running Lights Manoeuvring Assistance Lighting Fog Lights and Fog Tail Lights Automatic Lighting Leather-Wrapped Steering Wheel Steering Wheel Mounted Controls 8" Instrument Panel Multimedia System with 7.2" Touchscreen Exterior Mounted Sun Visor Roof Spoiler Side Spoilers Side Skirts In-vehicle Internet Lredsyvm Nkopfx Ac Aon

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Fifth-wheel height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Passenger seat fixed Without upper bunk Air heater Navigation system Electro-hydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bag air suspension (rear axle) Light dashboard, window decals, 4-bag air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L wheelbase 3600 fifth-wheel height 980 front overhang 1450 rear overhang 873 Overall length 5907 Cabin total length 2350 Overall height 3950 Overall width (excluding mirrors) 2540 - 2160 78 L SCR tank Diesel tank 372 liters 600-liter main tank Ground clearance front 269, rear 243 ConnecTruck Cruise control Lane keeping assistant Emergency brake assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (premium upholstery) Air heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilting LED daytime running lights Maneuvering assistance lighting Fog lamps and rear fog lamps Light automatic system Leather-wrapped steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts Onboard internet Lrjdpfxoyvm I Tj Ac Aen

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED lights, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Fixed passenger seat Without upper bunk Warm air auxiliary heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bag air suspension (rear axle) Light-colored dashboard, window decals, 4-bag air suspension, FDR 2.31, Winter Package with heated windscreen, sun visor, LED lights, retarder, air pressure horn, Technology Package 5 F-MAX wheelbase 3600 mm, coupling height 980 mm, front overhang 1450 mm, rear overhang 873 mm, total length 5907 mm, total cabin length 2350 mm, total height 3950 mm, total width (without mirrors) 2540 mm - 2160 mm 78 L SCR tank Diesel tank 372 liters 600 L main tank Ground clearance front 269 mm, ground clearance rear 243 mm ConnecTruck Cruise control Lane Departure Warning Emergency Brake Assist Axle load indicator Electronic Stability Program (ESP) Traction Control (ASR) Eco Roll Differential lock Driver's seat (high-quality upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Automatic light control Leather-wrapped steering wheel Steering wheel controls 8" instrument cluster Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts In-vehicle internet Lsdpfx Aoyvm I Hec Aern

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Lrsdsd Su Hxopfx Ac Ajn Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Volume: 60 m³ Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Storz end coupling Aluminum rims Pneumatic railing lifting system Lrsdpfozcaauox Ac Aon Electropolished discharge cone

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH Stationary-60 concrete plant is an excellent solution for medium-scale and long-term ready-mix concrete projects. Equipped with a fully automatic control system, this plant offers high efficiency and continuous production capacity. Its flexibility to produce all types of concrete allows it to easily adapt to different project requirements. With its durable steel construction, CE-compliant production, and low maintenance needs, it is a plant model trusted by professionals. Stationary-60 can be configured with pan, single-shaft, twin-shaft, or planetary mixer options depending on project conditions. It can work with cement silos with capacities ranging from 50 to 500 tons, and cement filling is easily done thanks to the integrated blast bunker. Furthermore, this model can be equipped according to climatic conditions, ensuring efficient concrete production with heating systems in cold regions and cooling units in hot climates. Aggregate pre-feeding systems eliminate the need for ramps, offering flexibility in field use. In limited spaces, bucket transport systems facilitate installation. FIXED 60 Fixed Concrete Batching Plant Technical Specifications Production Capacity: 60 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan - Single Shaft - Twin Shaft - Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters - 5.5 kW Lodpfexqgzyex Ac Aern Cement Silo: Options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the Stationary 60 Concrete Plant? CONSTMACH FIXED 60 is a concrete plant that stands out in the industry in terms of both performance and durability. It ensures uninterrupted production with its long-lasting components, high-quality production standards, and superior automation system. Its adaptability to different climatic conditions, energy efficiency, and modular structure provide a more than satisfactory return on your investment. CONSTMACH's strong technical service support, extensive spare parts network, and international production experience make the Stationary-60 not just a plant, but a long-term business partner. If you are looking for a reliable, high-capacity, and economical concrete plant, the CONSTMACH Stationary-60 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Lrjdpfx Aezd Rkec Aon User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as Cans, PET, Metal Buckets, Metal Containers, but also Plastic Canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for strapping rolls A quality product “Made in Europe” Suitable for compacting PET bottles Lrjdpfxovbq Rkj Ac Aon Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Presse Wertstoff, Müllverdichter, Müllpresse, Restmüllpresse

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Lsdpovah Epefx Ac Aorn Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Ledpfxsv Nmawe Ac Ajrn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, gearing type: automatic, lifting height: 6,000 mm, Year of construction: 2025, ∗JCB 525-60 New Vehicle∗ - JCB Diesel by Kohler [56 kW/74 HP] - Emission Stage V with DPF - Lifting Height: 6.00 m - Rated Load Capacity: 2,500 kg - 2-Stage Hydrostatic Drive – 20 km/h - Tires: GALAXY BEEFY BABY – 12-16.5 - Comfort Cab (ROPS/FOPS) - Adjustable Steering Wheel - Fully Opening Windows - Heating - Switchable 4-wheel steering (4WS) - Single-lever Servo Control - Q-Fit Boom Frame with Mechanical Quick Coupler - Fork Carriage with 1,200 mm Pallet Forks - LED Work Lights Front/Rear - Armrest - Electronic Park Brake Lredpfxoyfp E So Ac Aen Ready for immediate use. Many additional attachments available from stock. Appointment for viewing strongly encouraged. On request, we can offer you a leasing or financing proposal from Mercedes-Benz Bank. Mr. Mihm (Tel. ...) will be pleased to assist you. For further information, please visit our website. Subject to errors and prior sale! Power steering, Cab, Rental possible = More information = Engine brand: Diesel Lifting capacity: 2,500 kg Please contact Tobias Ebert for further information.

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL Lsdpfx Aced En R Ds Asrn The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, COMPACT serisi sabit Beton santralleri, pratik ve etkili çözümlerle ihtiyaç duyulan her seviyenin memnuniyetini sağlar. Sabit Beton santralleri, homojen beton karışımının yüksek kapasiteli üretimine kolay ve verimli bir şekilde ulaşabilir. kompakt Serisi kolay işletim sistemine ve en düşük yatırım maliyetlerine sahiptir. Buna ek olarak, tesis kurumsal kaynakların doğru bir şekilde kullanılmasını sağlar, böylece zaman tasarrufu elde etmek daha fazla kazanca dönüşecektir. TEKNİK ÖZELLİKLER: Modeli: Kompakt 60 Üretim kapasitesi: 60 m3 Mikser tipi: Twinshaft Mikser 1 m3 Çimento tartı: 600 kg Katkı maddeleri tartı:30 kg Su tartı: 250 kg Çimento silosu isteğe bağlıdır. Kompakt-60 oluşur: * Agrega Depolama Bunkeri * Agrega Tartı Haznesi * Agrega Tartı Konveyörü * Agrega Transfer Konveyörü * Twinshaft Karıştırıcı * Karıştırıcı Şasi, Yürüyüş Platformları, Merdiven * Su Tartı Haznesi * Çimento Tartı Haznesi * Katkı Tartı Haznesi * Hava Kompresörü * Çimento Vidalı Konveyör * Cıvatalı Çimento Silosu * Üst filtre, Emniyet valfi ve aksesuarları * Klima ile kontrol kabini * PC ve Otomasyon Sistemi * Kontrol ve güç paneli * Tüm ürünlerimiz özenle yapılır ve 1 yıl garanti kapsamındadır! * Kurulum ve operatör Eğitimi ücretsiz Lrsdpfx Aey A Eldjc Aen DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAYIN!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, • Tous nos produits sont conçus avec soin et couverts par une garantie d'un an ! Lrodsy A Ecvjpfx Ac Ajn • Formation à l'installation et à l'exploitation gratuite. Les centrales à béton fixes de la série COMPACT offrent des solutions pratiques et efficaces pour satisfaire tous les niveaux de besoins. Les installations de centrales à béton stationnaires allient une capacité maximale et une efficacité optimale. La série COMPACT garantit un fonctionnement aisé et une efficacité optimale tout en maintenant des coûts abordables. De plus, cette usine utilise de manière précise les ressources de l'entreprise, ce qui se traduit par un gain de temps qui se transforme en revenus accrus. SPÉCIFICATIONS TECHNIQUES : Modèle : COMPACT 60 Capacité de production : 60 m3 Type de malaxeur : Malaxeur à double arbre 1 m3 Balance de ciment : 600 kg Balance d'additif : 30 kg Balance d'eau : 250 kg Silo à ciment en option. COMPACT-60 se compose de : • Trémie de stockage d'agrégats • Trémie de pesée d'agrégats • Convoyeur de pesée d'agrégats • Convoyeur de transfert d'agrégats • Malaxeur à double arbre • Châssis du malaxeur, plates-formes de marche, échelle • Trémie de pesée d'eau • Trémie de pesée de ciment • Trémie de pesée d'adjuvant • Compresseur d'air • Convoyeur à vis pour le ciment • Silo à ciment boulonné • Filtre supérieur, soupape de sécurité et accessoires • Salle de commande avec climatisation • PC et système d'automatisation • Panneau de commande et d'alimentation POUR PLUS D’INFORMATIONS, N’HESITEZ PAS A NOUS CONTACTER!