Used Production Line For Corrugated Cardboard for sale (26,976)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 100,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Pjdswycrcopfx Aazjgt

Condition: good (used), Line now available for immediate sale. Was producing thins for supermarket contracts. Pedpowhagmsfx Aazsgt

Condition: used, Type Production Line Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, Pgsdpozpbl Defx Aazet and prior sale.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Pedpozxgmrofx Aazsgt Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Technical specifications • Sheet width: 1700 mm • Maximum sheet dimensions (X/Y): 1700 mm / 4000 mm • Minimum sheet dimensions (X/Y): 300 mm / 600 mm • Cardboard thickness: from 2 mm to 8 mm • Single production run: 200–600 units/hour • Maximum multi-unit production capacity: up to 2000 units per hour • Machine weight: approximately 4500 kg • Machine dimensions (X/Y/Z): approximately 5500 mm / 4000 mm / 1900 mm Pjdpfx Ajz A Tfgoazegt

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Pgjdpfx Asw Dd Hpoazst Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. Pgodpoy Uk A Sofx Aazet VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Croquette production line from the brands Koppens/GEA and Alexanderwerk. Pgodpfx Aaezk E Tuezot Equipped with: - KOPPENS/GEA EPR 200 breading line. - KOPPENS/GEA breading/conveyor belt. - Alexanderwerk NFV 50 vacuum filling machine. - Stainless steel rotary table/buffer table for extra breading. The line has already been dismantled and transported to the pick-up location.

Condition: used, Year of construction: 2006, functionality: fully functional, Distecno Flap Box Production Line – For Sale FOR SALE – DISTECNO FLAP BOX PRODUCTION LINE, 2006 Price: only €25,000 - Machine is currently in production and available from October 2026. Pgodpfx Aaezznxbszet - Automatic vacuum lead-edge feeder. - 2 flexographic printing units – top printing, chrome-plated (+1 additional printing unit requiring refurbishment). - Anilox rolls + rubber rolls (2 rolls refurbished in 2019). - Automatic slotter. - Automatically adjustable folder-gluer. - Automatic delivery section with stacking, counting, and bundling of finished packages. - Maximum sheet size: 1,677 × 2,500 mm. The machine is in good working condition and is currently in production. - Full machine documentation available. - Machine dimensions (net): 17 m × 4 m. - Production capacity: up to 10,000 sheets/hour, depending on box size and the efficiency of the operators at the feeder and delivery sections. - The machine processes corrugated cardboard from 310 g/m² to 1,500 g/m². Availability: October 2026 For sale: DISTECNO FLAP BOX PRODUCTION LINE from 2006 Price: only 25,000 Euros - Machine is continuously in production, available in October 2026 - Automatic vacuum lead-edge feeder - 2 flexographic printing units – top printing, chrome-plated (+1 printing unit requiring repair) - Anilox rolls + rubber rolls (2 rolls refurbished in 2019) - Automatic slotter - Automatically adjustable folder-gluer - Delivery section with stacking and counting of packages - Max sheet format: 1677 x 2500 mm The machine is in good condition, in production, and available immediately. The machine has complete documentation. Net machine dimensions: 17m x 4m Capacity: up to 10,000/hour, depending on the size of the packaging and the efficiency of the operators at the feeder and delivery sections. The machine processes corrugated cardboard from 310 g/m2 to 1500 g/m2.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Pgjdpfez A Dxkjx Aazot Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us. Pjdpfx Aaozuukqjzjgt

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Pedpfoi Akrkox Aazjgt Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Psdpfx Aaozyv Nrjzjgt Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Condition: used, Year of construction: 2018, machine/vehicle number: I2649A, working width: 2,800 mm, Used LCR Flexicut 2800 Cardboard Box Manufacturing Machine We are offering a used LCR Flexicut 2800, a cardboard box manufacturing machine designed for cutting and creasing corrugated cardboard. Key information: Manufacturer: LCR Model: Flexicut 2800 Year of manufacture: 2018 Condition: Used Machine type: Cardboard Box Manufacturing Machine Pgodpfey Ru Iksx Aazjt Application: Cutting and creasing for cardboard box production For more information, photos, technical details or pricing, please contact us by message or phone.

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit Pgodpfxeyw Tmlj Aazet 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Pgedsz Alpmspfx Aazot Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: Pedpfx Aaex Sqxhjzogt - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer Pgedpfx Aajw R Sknszst NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: used, machine/vehicle number: 008686, Position 1: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 2: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 3: Panel Feeding and Loading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 4: Multi-Blade Panel Saws KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 5: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 6: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 7: Roller Conveyors KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 8: Double Squaring Machines KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 9: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 10: Panel Tipper KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 11: Vertical Storage Systems KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 12: Panel Stacking and Offloading KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Pjdpfxezk Uxgj Aazegt Position 13: Cardboard Closing Stations KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 14: Robot KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 15: Strapping machine KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE Position 16: Spiral Wrappers KRAFT + AVERCON + FRAXINUS-FLOORING PRODUCTION LINE

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Wood lengthening machine - KALLFASS PFA-250 Pgedpowgacrofx Aazet Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Pedpfxjzp Hbqj Aazogt

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 32.3.0218, input voltage: 400 V, type of input current: three-phase, KÖNIG ARTISAN SFC – 2012 Compact König line for the production of rustic rolls, ciabattas, and various products cut from a dough sheet. Year: 2012 Key features * Manufacturer: KÖNIG * Model: Artisan SFC * Year: 2012 * Capacity: up to 300 kg of dough/hour * Dough sheet width: up to 170 mm * Belt speed: up to 1.5 m/min * Wide feed conveyor for dough loading * Flour dusting system * Dough sheet calibration rollers * Longitudinal cutting system * Transverse cutting guillotine * Stamping/forming station * Interchangeable cutting rollers and stamping tools * Adjustment system allowing the production of many different formats Products that can be produced Pgjdpfjzyv Nxjx Aazet Depending on the tools installed: * Ciabattas * Square rolls * Rectangular rolls * Triangular rolls * Rustic products * Stamped products * Various special shapes Several cutting and stamping tools are available with the machine. The Artisan SFC works directly from a dough sheet and allows for gentle processing, particularly suitable for soft doughs and rustic products. Machine can be viewed and tested by appointment. Photos, videos, and additional information available upon request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 Pjdjz A R I Espfx Aazogt - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT.

Condition: excellent (used), Double STDN pancake baking carousel system. Superb system designed for reliable high volume production of pancakes and crepes, blinis etc. Extremely hard to find on the used market. diameters can be adjusted from 30mm to 240mm and weights from 8g to 100g. New cost of this system is in excess of 500,000. We also have a continuous waffle manufacturing line for sale. Pgsdpfx Aaoxlra Rszst

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for slabs still active and fully functional, viewable and equipped with: - automatic loading unit - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine Pgedpfsxdnbbsx Aazet - automatic protective film applicator