Used Pvd Sputter Coating System for sale (40,814)

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Bedoy D Uphopfx Al Ajdh Dismantling and transport are the responsibility of the buyer.

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Bjdpfx Alezhb Hle Aodh

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Bdodey Htgwjpfx Al Aoh Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Bdsdox Tt T Repfx Al Aeh Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Bdodpfszgv R Njx Al Aeh

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Bdedpjya Hvqsfx Al Aoh Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Bedpfxezlh Aus Al Aodh Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2019, condition: good (used), Sturm Coating System Description: For sale is a complete industrial Sturm robotic painting system, manufactured in 2019. This automated coating system was used for the serial coating of components and originates from an industrial production facility. The used painting line comprises, among other elements, a spray booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated design, the robotic painting system is particularly well-suited for industrial applications in the automotive industry, metal processing, and serial manufacturing. Viewing at the Hamburg site is possible by appointment. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift (condition commensurate with age) System components: Processing units, drying and cooling zones, spray booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal after-treatment / exhaust air purification system (VeniaKab / RNV) Condition Notes: Control technology: According to plant maintenance, it is state-of-the-art Electrical & mechanical systems: Mostly in good condition commensurate with age Bsdpfx Ajzka Sfel Aodh Cybersecurity / Data Deletion: For security reasons, all hard drives from the robots and PC-based stations have been removed. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) Bjdpfx Alozn Ixnj Aedh - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Bedpfjy Um T Hsx Al Aedh Some spare parts are also included. Videos available on request.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. Bsdpfx Ajzhv Rlol Ajdh The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Bdodpoynnliofx Al Aeh Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Year of construction: 2002, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: AB 460 200, We offer a used vertical sputtering system, an ARDENNE VISS 300. The system dates back to 2002 and was expanded with a third chamber in 2016. The system features an airlock and three chambers equipped with SSM750RF magnetron sputtering units from Ardenne. Bdodpfx Alozp Ep Te Ash This includes one generator from Trumpf Hüttinger, model PFG2500RF. There is also a dual magnetron sputtering source that is currently not installed, along with the corresponding control unit from Astral. There is a temperature control unit for one of the two cooling circuits to maintain a constant temperature, e.g., 38°C, as well as two external cooling units with heat exchangers. Zinc oxide (ZnO) and zinc sulfide (ZnS) were sputtered in the chambers. The system was in use until the end of May 2026 and was shut down without any defects. The system was regularly maintained by the operator and is in very good condition. Before delivery, we will service all installed vacuum backing pumps and turbopumps (bearing replacement). On request, assembly and commissioning can be arranged on-site. If you are interested in the system, please do not hesitate to contact us with any further questions.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production Bdedpfx Alezqur He Aoh GEMA OptiStar CG07 Powder Coating Gun

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. Bodpfx Aljw Ek Nts Asdh All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description Bjdpfjy Szwujx Al Ajdh For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Bdjdpfxew Snm Uo Al Ajh Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Bdjdpszu Rpisfx Al Ash Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Bdodpfxjytgpqe Al Aoh

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Bdedjzvwc Sspfx Al Ash

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Bedpfxezkt I To Al Ajdh

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Bsdpfx Aloy T N Iqs Asdh

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Bdodpfx Alexd Thms Ajh Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Bdedey Hlvwjpfx Al Ash Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, Veolia Water System Bsdpez Ic T Rofx Al Asdh