Used Quaser Mv214P for sale (33)

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, 48 station tool changer, Spindle speed 15,000rpm, Dkedpfx Aezcy Irjggot through spindle Coolant, low volt light, swarf conveyor,

Condition: used, Year of construction: 2015, x-travel 1020 mm y-travel 610 mm z-travel 610 mm control Heidenhain iTNC530 Dkodpfx Agjzzfbmsgjt weight of the machine ca. 7390 kg

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. Dsdpfx Ajzxz Dfoggjkt The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, x-travel 1020 mm Djdpfxezzfb Hs Aggjkt y-travel 610 mm z-travel 610 mm control Heidenhain iTNC530

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 712 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens und Heidenhain, workpiece height (max.): 400 mm, workpiece diameter (max.): 540 mm, workpiece weight (max.): 200 kg, total height: 3,360 mm, total length: 4,040 mm, total width: 2,770 mm, table load: 200 kg, rotary table diameter: 410 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Machine available with Siemens 828D Technical data 5-SIDE MACHINING • B/C-axis encoder • B-axis +30° to -120° • C-axis 360° • Media preparation table TOOL MAGAZINE CAPACITY • 60-position magazine (chain) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel X: 712 Y: 540 Z: 515 • Swivel diameter 540 mm • Workpiece weight 200 kg Djdpfszlhvhjx Aggskt • Workpiece size ⌀540 mm x 400 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good access to the machining area and tool magazine EQUIPMENT • CNC control Siemens 828D (15") or Heidenhain TNC 640 • MPG handwheel • 60-position tool magazine • 12,000 min⁻¹ (taper #40), coupling • Spindle cooler • Air blow-through through the spindle • 20 bar coolant supply • CAN filter for chip flushing/ring cooling • Automatic central lubrication system • Media preparation table (6 connections) • Glass scales X, Y and Z axis • Chip conveyor • Direct path measuring system C/B axis • Deublin rotary union • CE specification

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Djdpfx Agszlpgnogokt

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Dsdpfx Agszr Uq Ssgokt Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: like new (used), Year of construction: 2023, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 146G230069, travel distance X-axis: 661 mm, travel distance Y-axis: 572 mm, travel distance Z-axis: 560 mm, controller manufacturer: Fanuc, controller model: Oi - MF Plus, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 3,140 mm, total width: 2,050 mm, table width: 550 mm, table length: 940 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6 h, spindle nose: 40 tapper, tool length: 300 mm, tool diameter: 150 mm, Quaser MV134 Fanuc Oi - MF Plus CNC controller Djdpfxjxm Txqs Aggjkt The machine its new, only 6 Hours

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,860 mm, total width: 2,760 mm, table width: 700 mm, table length: 1,200 mm, overall weight: 7,390 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Quaser MV184P/12B was manufactured in 2015. It features a travel distance of 1020 mm on the X-axis, 610 mm on the Y-axis, and 610 mm on the Z-axis. The machine is equipped with a Siemens 828D controller and has a maximum rotational speed of 12000 rpm. If you are looking to get high-quality machining capabilities, consider the Quaser MV184P/12B vertical machining centre we have for sale. Contact us for further details. • Operating hours: 8,500 h • Functionality: Fully functional • Spindle speed control: Infinitely variable Additional equipment • Chip conveyor Technical Specification Djdpfx Aozw Dcbjggjkt Taper Size SK 40

Condition: good (used), Year of construction: 2001, Quaser MV 204 II + 4th axis indexing head Year of manufacture: 2001 Control system: - Siemens 810D Dkedpfezwmv Rsx Agget - Electronic handwheel Spindle: - Max. 10,000 RPM Travel distances: - X – 1020 mm - Y – 600 mm - Z – 560 mm Table: - Table size 1200 × 635 mm - Max. table load 1000 kg Tool changer: - 24 magazine positions Availability: - Immediately available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Djdpfx Ajzu At Tsggokt Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: Dkodjzdityepfx Aggjt The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t Dsdpfxjzuxx So Aggekt dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. Dkjdpeibat Iefx Agget The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2016, Quaser MV 184 C / 10 B Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! and has 5,700 spindle hours. Technical data: Year of manufacture 2015 X-axis travel 1,020 mm Y-axis travel 610 mm Z-axis travel 610 mm Control system Sinumerik 828 D Siemens Main spindle: Max. speed 10,000 min/-1 Drive power - main spindle 15 kW Tool holder SK 40 Spindle bearing diameter 70 mm Distance spindle / table 100 - 710 mm Work table: Table clamping surface 1,200 x 600 mm Max. table load 500 kg T-slots 6x 18 H8 x 100 Tool changer: Number of tool positions 30 Max. tool diameter 76.2 mm Dsdpfozg Hnfox Aggokt Max. tool diameter with free adjacent pocket 125 mm Max. workpiece length 280 mm Max. tool weight 7 kg Tool-to-tool change time 2.5 sec Chip-to-chip change time 4.0 sec Feeds: Feed rate 1 - 24,000 mm/min Rapid traverse (X / Y / Z) 32 / 32 / 24 m/min Total power requirement 20 kVA Machine weight approx. 7.3 t Space requirement approx. 5.0 x 3.0 x 3.4 About the machine: Offered is a Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016. This machining center is in very good original condition. It comes from a company where it was only used a little for training purposes. It has a very easy-to-use control system. The guides are regularly lubricated by the central lubrication system. The Quaser MV 184 C/10 B has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MV 184 C/10 B on-site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,376 h, machine/vehicle number: 302E110064, travel distance X-axis: 885 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, workpiece diameter (max.): 640 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 600 mm, spindle speed (min.): 15,000 rpm, operating hours of spindle: 10,687 h, number of slots in tool magazine: 48, tool length: 280 mm, tool diameter: 125 mm, Equipment: documentation/manual, For sale: Quaser UX600 15C - Universal machining center - manufactured in Taiwan in 2011. - 5-axis machine with direct measurement on all axes - Control unit: Haidenhain iTNC 530 Operating hours: 41,376 Application: Milling Machine length: 3700mm Machine width: 4000mm Machine height: 3100mm Machine weight: 12,100 kg Number of spindles: 1; spindle speed range: 15,000 rpm Travel: X axis: 885mm; Z axis: 500mm; Y axis: 800mm Table External length: 600mm External width: 500mm Tooling Maximum tool length: 280mm Maximum tool weight: 7 kg Dkedpfxewlpyws Aggst Maximum tool diameter: 125mm Tool holder: SK 40 Internal cooling: Yes The machine operates in 3 shifts – every day! The machine comes with 20 SK40 tool holders!

Condition: used, Year of construction: 2012, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 7,000 kg, Quaser MV184 P 3-axis cnc center passes: X1020mm Y610mm Z610mm Table size 1200x600mm Spindle 22-30Kw max 12000 rpm Tool magazine 30 pieces BT40 Renishaw OMP40 measuring probe Spindle cooling 20 bar Fanuc 31i control with USB 1GB memory with machine chip conveyor, tools, measuring probe, documentation of the machine very good condition of the machine Dksdpfx Aoufh Dkjggot

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 760 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 760 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece height (max.): 800 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 120, tool length: 400 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, horizontal machining center with pallet changer, two pallets 500x500, 120 tool positions, probing system. Dsdpfszdqvzox Aggskt

Condition: good (used), Year of construction: 2008, QUASER Type MV154 PL / 12 Construction Year 2008 Description CNC and Control: Heidenhain iTNC 530 Axes: X: 1020 mm Y: 500 mm Z: 500 mm Table size: 1,200 x 500 mm Maximum table load: 500 kg System: Cone and face contact Taper: BT40 Big-Plus Spindle: BIG-PLUS BT40 Spindle taper: SK40 / ISO 40 Spindle speed: 40 – 12,000 rpm Spindle motor power: 18.5 kW Working feed rate: 0 – 20,000 mm/min Rapid traverse: 40 m/min Djdpfx Agszl E Tdsgokt Tool magazine: 30 positions Automatic tool changer Through-spindle coolant (IKZ) Chip conveyor Programming: Conversational ISO Interface: Tool management Axis monitoring Simulation and execution Cooling System: External tank Grundfos pump Complete circuit Approx. dimensions: 2470 x 2540 x 2830 mm Approximate weight: 6.850 kg

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Dkedpfxeyfm T Hj Aggot

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Table: ∅320 mm Passages: Dodpfxouclile Aggskt X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Tool probe very good condition of the machine machine can be loaded on a standard truck height of the machine 275cm width 245cm length 300cm weight of machine 7300kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Dksdpfx Asymmh Tjggjt Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Cycle hours 7100 Timer

Condition: excellent (used), Working travels 1020 x 530 x 560 mm Table size 1200 x 500 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. Dedpfx Aszmdd Doggskt Control FANUC 0i-MC With cooling through spindle With chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table load: 500 kg, spindle motor power: 22,000 W, spindle nose: ISO 40, number of slots in tool magazine: 24, CNC Selca S 4045 DH WORKING AREA: Table dimensions: 1.200 x 500 mm Longitudinal travel (X): 1.020 mm Transverse travel (Y): 500 mm Vertical travel (Z): 500 mm Table load capacity: 500 kg FEED RATES: Rapid traverse X/Y/Z: 40.000 mm/min SPINDLE: Spindle taper: ISO 40 Max spindle speed: 15.000 rpm Spindle power: 22 kW TOOL CHANGER: Tool selection: Random Number of tools in magazine: 24 Chip-to-chip tool change time: 4 sec DIMENSIONS: Machine dimensions: 2.535 x 2.465 x 2.750 h mm Weight: 6.850 kg Machine equipped with: • High-pressure coolant through spindle • Coolant tank 400 L • Remote electronic handwheel • Instruction manuals and CE Declaration Dksdpjyzr S Iefx Aggst

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm Dsdpsndz Aqjfx Aggokt y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *