Used Röhm Mk3 B24 for sale (546)

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 Hedpfx Aexdw Svjhast -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hjdpfx Ahjzdidtsaot

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Hjdpfx Ahezuvqljast Overall height 91.5 mm Jaw width 30 mm Lowest support height on jaws 68.5 mm Middle support height 80 mm Clamping height per jaw approx. 11.5 mm Jaw clamping travel approx. 25 mm

Condition: excellent (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR span range max.: 400 mm span range min.: 50mm Hodozw E Avopfx Ahast steady rest width: 170 mm steady rest height: 730 mm

Condition: like new (used), 3 unused clamping elements Hedpfx Aezwt Rnjhajt Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: like new (used), as-new centers and sleeves, MK5 (sleeves and centers with carbide insert) Hjdjzv Sd Djpfx Ahajt

Condition: good (used), functionality: fully functional, 1 piece faceplate with a diameter of 625 mm and 1 piece faceplate with a diameter of 650 mm Hodpfx Ahjzlcdasaot

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 MACH-ID 2994 Make: ROHM Type: 400 Year: 2007 Diameter: 400mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hsdozdilpopfx Ahaot

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Hjdpfx Ahey Apncjajt Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: ready for operation (used), RÖHM RB-K 135 – Machine Vise – SHOWROOM ITEM -Jaw width: 135 mm -Maximum clamping force: 40 kN -Design: Power-operated machine vise -Application: Milling machines and machining centers Hodpeztc Aljfx Ahaet -Clamping system: mechanical force amplifier -Guides: hardened and precision-ground -Design: Low-profile clamping system Dimensions: L x W x H 0.6 x 0.2 x 0.1 meters / Weight 39 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Hedpfoy Agmvjx Ahaot

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm Hodpfjzlaqksx Ahast * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws Hodpfjrwmkajx Ahajt - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm Hjdpfxjqxavlo Ahaot in very good condition

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 Hodjyuwh Tspfx Ahaot - Pneumatically actuated stationary clamping block - 3-jaw power chuck - Operating pressure: 6 bar - Clamping force: 111 kN - Outer diameter: 415 mm

Year of construction: 2000, condition: good (used), Set of soft and hard jaws for 3-jaw power chuck RÖHM 630 mm. Hedpfx Ahswd Tl Ijast

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. Hjdpfx Aezg Tf Dshajt 1 unit with through-hole = 128 mm 1 unit with through-hole = 90 mm 1 unit with through-hole = 80 mm.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,628 h, functionality: fully functional, machine/vehicle number: W09WOM125ADW76457, operating pressure: 2,800 bar, total length: 440 mm, total height: 205 mm, total width: 194 mm, empty load weight: 2,260 kg, fuel: diesel, overall weight: 2,700 kg, fuel tank capacity: 300 l, rotational speed (max.): 1,800 rpm, rotational speed (min.): 900 rpm, Equipment: chassis, Used water high-pressure unit WOMA Ecomaster MK3 250M (plunger Ø16mm) with DEUTZ TCD 2012 engine. Maximum working pressure: 2800 bar Maximum flow rate: 20 l/min Pump operating hours under pressure: 1077 h Engine operating hours: 1628 h Year of manufacture: 2010 Hedpfoy Nmm Njx Ahast Condition: very good – ready for work Used additional equipment: 2 x 20m UHP hose DN8 (3000 bar), 1 x 5m UHP hose DN5 (3200 bar), 1 x control cable, 1 x control cassette, 2 x UHP high-pressure guns (3000 bar), WOMA technical documentation, 2 x spare wheels Original WOMA superstructure. Regular maintenance carried out. Complete gearbox replacement under WOMA warranty in 2015 (relevant documents available). Trailer registered and paid (valid technical inspection).

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Hedpfx Aszq Dlvohaot

Condition: used, RSI 715 Base Printstation Pro600 Twin Head MCS Falcon (HP Inkjet) Print Heads, Air Table with Conveyor, Stream Feeder V-1400ij Inkjet Hopper A3 - A5, 2m x 1m Footprint. S/No. A-22929. Country of Origin: U.S.A. Highest bid is subject to vendors approval. Hedpfxjzwnw Nj Ahaot Please Note: This lot is located in Birmingham, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1999, chuck outer diameter: 250 mm, through hole: 75 mm, Metal cutting Tooling ROHM - 250 MACH-ID 2997 Make: ROHM Type: 250 Year: 1999 Diameter: 250mm 4 chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hodjzdih Djpfx Ahajt

Condition: ready for operation (used), Spindle with Röhm OVS 130 552-493 collet chuck cylinder for Monforts RNC 600E machine, used, in good condition, 100% functional, scope of delivery as shown in the photos. NOTE: Please request separate quotes for packaging and shipping costs! Hjdpezw Sz Eefx Ahajt

Condition: used, thickness of jaw 160 mm Span: approx. 290 mm Jaw width: 160mm Total height: approx. 175 mm Total length: approx. 720 mm Weight: 89kg Hsdpfxjzcggzs Ahaet For vertical and vertical use!

Condition: ready for operation (used), functionality: fully functional, overall weight: 30 kg, 2 sets of hard, reversible top jaws for RÖHM chucks, helical design centric adjustment Hodpfx Ahowu R Nreaot 2 sets of soft, pre-machined top jaws for RÖHM or BISON chucks Mounting on base jaws for chuck types (base jaws available upon request). for chuck types RÖHM ZGU 500.630, 700 RÖHM ZSU 500, 630, 700 UGU 500, 560, 600, 630, 710 USU 500, 560, 600, 630, 710 ---- The listed price is per set of 3 pieces. Four-jaw chucks: 4 pieces available upon request. Dimensions: hAB = hard top jaws = width B = 63 mm wAB = soft top jaws = width B = 50 mm ---- 2 mounting holes ø 20 mm Center distance 76 mm Longitudinal groove in jaws 12.7 mm Transverse groove in jaws 17.0 mm ---- Total weight approx. 40-50 kg RÖHM ZS chucks - ø 500 mm; ø 600 mm; ø 800 mm ----- Signs of wear are present. The jaws have been cleaned, inspected, and are in good condition.

Condition: used, Year of construction: 1998, Graf Opat G66 industrial Paper Guillotine with Repro-Gram Control Panel, 660mm Wide Cut Area, Light Guard Protection, Two Hand Push Button Operation. S/No. 135 (1998). Country of Origin: Poland Location: This lot is located in Birmingham, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hedpfx Aezwn Hqehast