Used Reda Cm100 Vacuum Evaporator (2018) for sale (5,661)

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Ncedpfsykrdbjx Agpju

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description Ncjdpfx Agszcwitspeu The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Nsdponhikiofx Agpecu

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Nodpfx Aemnkhfogpecu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Nedpfx Agoyvrwtjpjcu Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Nsdpfx Ajyvrtuogpocu Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: used, REDA RE 50 Cream Separator Ncodpfxjzfgbcs Agpou The REDA RE 50 Cream Separator is a high-performance dairy processing machine designed to efficiently separate cream from milk. Built with advanced technology, this separator ensures superior cream quality while maximizing yield. Key Features: - Capacity: Designed for high volume, the RE 50 can process large quantities of milk, making it ideal for both small-scale and industrial dairy operations. - Efficiency: The separator operates with minimal energy consumption, ensuring cost-effective processing. - Durability: Constructed from high-quality stainless steel, the machine offers outstanding resistance to corrosion and wear, ensuring a long service life. - Easy Maintenance: With a user-friendly design, the RE 50 is easy to operate and maintain, saving valuable time for dairy processors. - Adjustable Settings:Users can customize the separation process to achieve the desired cream consistency and quality. The REDA RE 50 Cream Separator stands out in the market for its reliability, efficiency, and exceptional performance. It is the perfect choice for dairy farmers and processors looking to enhance their cream production. Capacity Skimming : 5000 Litres/ Hour Clarification: 7500 Litres/Hour Cream Skimming: 0.03% Tools: Included Control Panel: Included Water System and Pump: Included Base Plate: Included CIP: Yes Type: Automatic Cleaning Manuals: Included Export Packing: Included

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon Nedencd S Uopfx Agpecu 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Ncedpfjx Aqa Djx Agpsu DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Njdpfx Asx Ap I Togpjcu Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Ncjdpfovrzakjx Agpeu Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086635 Ncodpfxsvrgace Agpou Model: A 124H Type: F4HE4CL06611010 Condition: Used

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Nsdpfx Agsvrgd Ijpecu

Condition: used, A 124H, F4HE4CL06611010, Pfeiffer Vacuum, vacuum pump, SN:AP8086636 Model: A 124H Type: F4HE4CL06611010 Nsdpfxst Iggwo Agpocu Condition: Used

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Model: 800040V1444 Type: TURBOVAC T1600 Ncsdpsrf U Trefx Agpsu Condition: Used Note on condition: free of contamination

Condition: excellent (used), functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular Vacuum Pump, PM P02 420 C, TMH 520 Nsdpfx Ajxpu Sqsgpecu Model: PMP02420C Type: TMH520 Condition: Used

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Ncodpfsvrgdzex Agpsu

Condition: used, 11375, WSU 501 H, Ruvac Oerlikon Leybold Vacuum GmbH Roots vacuum pump Model: 11375 Ncedpfx Agjq S Tk Hopsu Type: WSU 501 H Condition: Used

Condition: new, 15798, TM 23, Oerlikon Leybold THERMOVAC measuring device - New Model: TM 23 Nodpfeq S Sp Nex Agpecu Condition: New

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - like new Model: 844224V0004 + 400000250 Type: COOLVAC 1500 Ncsdpfxeh Igffo Agpju Condition: Like new

Condition: as good as new (ex-display), 844224V0002 + 400000250 + 400000801, COOLVAC 1500 + RGD 7/25 / COOLVAC 1500 + RGD 7 25 / COOLVAC1500 + RGD725, Oerlikon Leybold vacuum cryopump - as good as new Nedpfoq S Twgjx Agpscu Model: 844224V0002 + 400000250 + 400000801 Type: COOLVAC 1500 + RGD 7/25 Condition: as good as new

Condition: as good as new (ex-display), 252009, Oerlikon Leybold Radio Transmitter RT100 /St1 + RT 100 /St2 - As New Model: 252009 Condition: As New Ncedjq S Sq Aspfx Agpou

Condition: as good as new (ex-display), 230116, CM52PB, Oerlikon Leybold COMBIVAC evaluation module with display - As good as new Model: CM52PB Condition: As good as new Ncedpoq S Sp Esfx Agpsu

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. - Capacity 16m3/H Ncsdpfx Aoud Ryrogpou

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t Nedohx R Dkspfx Agpscu CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.