Used Regulator for sale (3,190)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Pgodpfjzvmy Hex Abusu Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: PI2512080FF001, tank capacity: 600 l, usable tank capacity: 600 l, total length: 2,000 mm, total width: 1,520 mm, total height: 1,700 mm, inner diameter: 1,200 mm, wall material: stainless steel, discharge height: 1,000 mm, input voltage: 38 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, 1. The pot liner is made of 304 food-grade stainless steel, with an inner liner of 5mm and an outer liner of 3mm. The pot liner is formed in one stamping process. 2. Pot inner diameter size: 1200mm, depth 750mm, working capacity approximately 200-400kg. 3. The dimensions of the equipment are approximately 2000mm in length (including control cabinet), 1520mm in width, and 1700mm in height. (The height when the large arm is raised is about 2450mm). 4. The total power of the equipment is 38.2 kW, with a heating power of 36 kW (controlled in three levels, each can be turned on separately). The mixing motor is 3 kW (using variable frequency speed regulation). 5. Heating method: The heating tube heats the thermal oil, allowing for setting the temperature, frying time, and continuous frying for extended periods. 6. The main structure of the frame is entirely made of 80*80 high-strength stainless steel. 7. Stirring system: It adopts a special planetary tilt rotation, 360-degree scraper without dead corners, and is equipped with a stirring auxiliary device. The stirrer uses a polytetrafluoroethylene scraper, and the pot has a side scraper device. 8. The stirring belt has variable frequency (the stirring speed can be adjusted), comes with a gear-free maintenance motor and uses thermal oil. Pjdpfx Abj Agm S Teujgu 9. The equipment has dual-cylinder hydraulic discharge, equipped with a 1.5kw hydraulic station, with a discharge height reaching 900-1000mm.

Condition: used, Year of construction: 2018, machine/vehicle number: 18201655, Useful capacity: 105 L Total tank volume: 210 L Mother starter reserve: 31.5 L Tank made of AISI 304 stainless steel Submerged mixing impeller made of AISI 304 stainless steel Pjdpfx Aj Agn Icobusgu Lid and outlet valve made of AISI 304 stainless steel Electronic control with screen and keyboard Maturation and preservation cycles Adjustable maturation temperature from 20 to 40 °C Adjustable preservation temperature from 4 to 20 °C Adjustable maturation time from 1 to 24 hours Integrated refrigeration unit Refrigerant: R134a High outlet for starter extraction Low outlet for complete draining Power supply: 400 V three-phase + neutral + earth Frequency: 50 Hz Electrical power: 3.6 kW Current: 9.6 A Dimensions (L x W x H): 680 x 1,165 x 1,614 mm Weight: 300 kg Year of manufacture: 2018 Key benefits Useful capacity of 105 L for the production of liquid starter 210 L tank made of AISI 304 stainless steel Programmable maturation and preservation cycles Submerged impeller for homogenizing the mixture Integrated refrigeration unit for thermal regulation Electronic control panel with display Preservation of a mother starter reserve after extraction Two outlets for sampling and draining Stainless steel lid with removable sealing gasket Made in France

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations. Podpfx Aj Af Imaebusgu

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Pjdpfsxxz T Hsx Abuogu Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) Psdpfx Ajz S Ni Ujbuogu - Product...

Condition: good (used), SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate Psdpfx Absxnxdnsujgu -Number: 11x generator available -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Condition: like new (used), Max. 16 bar / Outlet pressure 0.5–10 bar Max. particle size: 25 µm Application: Compressed air systems Psdszdc H Hspfx Abuogu Width: 45 mm Height: 190 mm Depth: 45 mm Weight: 341 g Condition: Like new

Condition: used, Year of construction: 2008, machine/vehicle number: 1540.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, insert molding, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4-160K - Machine number: 1540.18 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Overall weight: 28 T - Basement required: no Podps Adtl Aofx Abusgu ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 280 bar - Return speed downwards: 220 mm/s - Return speed upwards: 150 mm/s - Initial pressing speed: 45 mm/s ==== Hydraulics & drive - Main motor: 55 kW - Auxiliary hydraulics: 7.5 kW - Oil tank: 600 l - Pneumatic pressure accumulator: yes ==== Control - Control: SIEMENS SIMATIC C7 - Control panel: pendant control panel - Two-hand operation ==== Safety - Blanking force limitation - Maintenance platform - Emergency stop - Light curtain / light barrier - Protective grating - Separate control cabinet ##### Application areas: Forming, deep drawing, straightening, insert molding, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160K, 160 T press, 160 ton press, forming press, deep-drawing press, straightening press, insert molding press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on them. Our core strength lies in the design and construction of custom-made machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz Psdpfx Abs Ad Antjuegu - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: like new (used), INLET 10 bar Max Temp. -10°C...60°C Application: Compressed air systems Width: 70 mm Height: 300 mm Pgsdpfx Ajzcla Tsbusu Depth: 75 mm Weight: 726 g Condition: Like new

Condition: excellent (used), functionality: fully functional, Manifold with Alfa Laval Valves and Regulators Valve manufacturer: Alfa Laval Number of valves: 11 pieces Number of regulators: 6 pieces Set dimensions: 800 mm × 550 mm × 1200 mm The manifold (valve assembly) is equipped with 11 Alfa Laval valves and 6 flow regulators. The unit is made of stainless steel, designed for use in hygienic process installations such as the food, dairy, brewing, or pharmaceutical industries. Alfa Laval valves are renowned for their high reliability, precision operation, and ease of maintenance. The integrated regulators allow for precise control of pressure or media flow, ensuring efficient and safe operation of the entire system. Applications: - Production lines in the food and beverage industry - CIP / SIP systems (Cleaning and Sterilization in Place) - Process installations in dairy plants and breweries - Flow control systems for process liquids Pgodpfjxviz Tox Abuju

Condition: good (used), 200 bar / Class 1 / D9KA Application: Gas filling systems Width: 185 mm Height: 210 mm Depth: 60 mm Weight: 1176 g Condition: good, second-hand Pjdpjzfy U Aefx Abuegu

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Drive: Self driven by motor and belt with reducer Pgodpfxoz Imn Sj Abusu Outlet: Double jacket outlet for temperature Control Location: In stock

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,805 h, load capacity: 4,000 kg, lifting height: 4,450 mm, fuel type: electric, mast type: other, battery capacity: 870 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 2,400 mm, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following technical specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,805 Pjdpj Adnzfofx Abusgu Still 4.0-ton electric forklift with a full cabin and heating, battery at 78%, good tires (rear tires new), standard free-lift mast, side shifter, 4th hydraulic valve, single-pedal operation, four-link mechanical system, pre-equipment according to StVZO (German Road Traffic Licensing Regulations), fork length 2,400 mm (other lengths possible), charger. Additional attachments such as fork positioners, rotators, extension forks, etc., as well as other fork lengths, are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drives are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). Further information about us and other offers can be found on our newly designed website!

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm Psdpfj Ad H S Asx Abujgu For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: used, Features Siemens IE3 type electro magnetically braked motors All spindle motors with Star delta starting system Edge reference straightening system 65 mm high fences Telescopic bedplates between vertical spindles Infeed side pressure unit Double side pressure unit opposite fence side head moving with near side head with pneumatic loading Adjustable side guides after near side head Pad pressure after top head with vertical screw adjustment and mechanical digital readout 2000 mm pre-straightening infeed table with fence each 10 mm adjustment 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting Independent manual vertical adjustment to top head High precision spindle units with high speed bearings All bedplates and fences have 0.3 mm hardened chrome HRC at 60° Automatic bed lubrication system with timer control Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading One piece heavy duty cast iron main frame with optimum vibration absorption Centralised lubrication system to all main slides Vertical spindles have 80 mm vertical adjustment Horizontal spindles have 40 mm horizontal adjustment Safety interlock at infeed to prevent feeding oversized material ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head Note: The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together. Lift up sound and safety enclosure including internal lighting and safety interlocks Psdez Il Tgjpfx Abuogu Interlock to lift up enclosure Dust extraction hoods outlet diameter 150 mm Toolkit Instruction and maintenance manual, electrical diagram and parts list. Machine supplied with electrics arranged 3/50/415 V 1 no. CE Pressure Regulator Machine conforms to CE specification

Condition: used, Year of construction: 1994, machine/vehicle number: 10353, functionality: fully functional, pressing force: 153 t, stroke length: 700 mm, table width: 1,300 mm, table length: 1,800 mm, total width: 4,870 mm, total height: 4,830 mm, overall weight: 27,000 kg, Equipment: documentation/manual, Hydraulic double-column press – 153 T – 1,800 × 1,300 mm For sale is a hydraulic double-column press from Maschinenfabrik Exner GmbH & Co. KG with a maximum pressing force of 153 T. The machine has a table size of 1,800 × 1,300 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic double-column press – 153 T – 1,800 × 1,300 mm ==== General Information - Manufacturer: Maschinenfabrik Exner GmbH & Co. KG - Design: Hydraulic double-column press - Model: EX SBR 150 - Machine number: 10353 - Year of manufacture: 1994 - Pressing force: 153 T - Rated force: 1,500 kN - Table size (usable area): 1,800 × 1,300 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 4,830 mm - Overall width: 4,870 mm - Total weight: 27 T - Basement required: no ==== Hydraulic Cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 320 mm - Stroke adjustment: 300 mm - Stroke rate: 300 strokes/h - Retraction force: 175,000 N - Max. working pressure: 320 bar ==== Hydraulics & Drive - Main motor: 30 kW - Auxiliary hydraulics: 15 kW - Cooling motor: 7.5 kW - Stroke adjustment motor: 1.5 kW - Fan motor: 0.18 kW - Main motor speed: 1,460 rpm - Total power consumption: 46.68 kW - Oil tank: 1,300 l - Oil type: ISO VG 46 - Air-oil cooler: yes - Lubrication pump: Motor-driven lubrication pump ==== Tooling - Number of T-slots: 4 - T-slot width: 22 mm - T-slot spacing: 500 mm - Thickness of clamping plates: 150 mm - Additional clamping plate: yes - Tool protection / tool securing: yes ==== Guidance - Guidance: 8-way - Ram locking / catch mechanism: 2-way ==== Control System - Control system: PLC / programmable control console - Operating panel: Control console ==== Safety - Snap-off damping - Follow-up travel: 48 mm - Follow-up time: 135 ms - Safety distance: 216 mm - Light curtain / light barrier - Protective grating - Separate control cabinet Pjdpfx Ao Advkuobujgu ==== Electrical Connection - Operating voltage: 400 V - Frequency: 50 Hz ##### Application areas: Forming, straightening, pressing, assembly operations, toolmaking, mold making, mechanical engineering, metalworking, steel construction, contract manufacturing, heavy industry, series production (Hydraulic double-column press, double-column press, hydraulic press, EXNER press, Maschinenfabrik Exner, EX SBR 150, 153 T press, 153-ton press, forming press, straightening press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety directive NR 12. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: like new (used), 0.4–10 bar / Max INLET 14 bar Application: Machinery/equipment from Glaston, etc. Width: 54 mm Height: 54 mm Psdpfx Ajy U E Upsbuegu Depth: 133 mm Weight: 597 g Condition: like new

Condition: used, This listing is for 1 of 2 Spectramax M2 Microplate readers These units are in full working condition and is ready for immediate use Pgedpsxhfzyefx Abuju Overview The SpectraMax M2 (and enhanced M2e) from Molecular Devices is a high-performance multi-mode microplate reader designed for flexible detection in life science applications. It combines absorbance, fluorescence, and optional luminescence in a compact benchtop instrument ideal for ELISA, DNA/protein quantification, enzyme kinetics, and cell-based assays. Key Features Multi-detection capability: Supports absorbance, fluorescence (top-read), and with the M2e, adds bottom-read fluorescence, luminescence, and time-resolved fluorescence (TRF). Top- and bottom-read fluorescence: Bottom-read only on the M2e for enhanced cell-based assay sensitivity. Dual-mode cuvette port: Enables standard spectrophotometry outside of microplate format. Dual monochromators: Selectable excitation and emission wavelengths (1 nm increments) without the need for filters. PathCheck® Technology: Automatically normalizes optical pathlengths for absorbance, ensuring accurate, cuvette-equivalent readings. Well volume sensor: Prevents errors from low-volume or uneven well filling. Instrument and software validation: Compatible with SoftMax® Pro software for data analysis and 21 CFR Part 11 compliance, supporting regulated lab environments. Robot compatible: Integration-ready with automation systems and plate stackers for high-throughput workflows. Typical Applications ELISA DNA/RNA/Protein quantification Enzyme kinetics Cell viability and cytotoxicity (M2e preferred) FRET and TR-FRET Luminescence assays (M2e) Low-volume or cuvette-based protocols

Condition: excellent (used), Thyristor regulator with field regulator (28211) Manufacturer: Unitek Type: 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight: 11 kg Pgjdpfxehhyy Ro Abuou Width: 290 mm Depth: 230 mm Height: 225 mm

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface Pgsdpfxodz Srbo Abuju - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Pedpfx Abj Adv Rueuegu Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Pgsdpsdz Sraofx Abueu Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Pjdpfsxxz I Rex Abujgu Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.