Used Rema Expert Automatic for sale (23,961)

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Lrodozp Nz Hspfx Afwjr Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Ljdpjzp Nycofx Afworr Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Lrjdpfx Afjxd Ubnewer Note 🗒️ No printer.

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Classifier was manufactured in 2005 but was never installed. Lsdjzvgklopfx Afwsrr Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection Lrodpfxswgc I Rs Afwor • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm Ljdjzryuvepfx Afwerr - Cutting height: max. approx. 80 mm

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Lsdjzwgt Nepfx Afwsrr Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Lrodpozwgtvefx Afwjr Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Lrodpfxsza Dwxj Afwsr Weight 117 kg Equipment:  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Lsdjif Ek Rjpfx Afwerr • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes Lredpfxsfnlkwe Afwer • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. Lrsdpfx Aezvbldsfwjr The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Lodpfx Afsxmkcmowsrr

Condition: excellent (used), Catalogue number: 7853 Lsdpfszum Diox Afworr TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm Lrodpfxeztq Ntj Afwjr - blade guard - height-adjustable arm - max cutting height: 120 mm - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW - extraction port diameter: 110 mm - roller width: 530 mm - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8018 Lredpfx Asztqv Hefwsr TECHNICAL DATA - max. blade diameter 400mm - blade bore diameter 30mm - blade guard - adjustable arm (up/down) - max. cutting height 100mm - max. cutting width 540mm - hydraulic blade feed - 2 infeed rollers on the table - outfeed roller on the table - motor 3.7kW - hydraulic pump motor approx. 0.55kW - diameter of dust extraction port 100mm - roller width 530mm - dimensions of the infeed roller table 2000x640x910mm - dimensions of the outfeed roller table with scale 2000x640x965mm - machine dimensions (L/W/H) 1900x1540x1820mm - weight approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – DTR documentation (Technical Documentation) – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg Ljdpjztncqsfx Afwsrr ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Lsdpfxezv Niwj Afwjrr Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES Ledpfjztavvex Afwjrr – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm Lrjdpfeztaviox Afwor - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg Lsdpfxohaf Ndj Afwerr - immediately available -

Condition: ready for operation (used), Rema-4-Station Grinding Machine -Angle adjustable -Tilt adjustable -Oscillating -Cooling system -Work light Ledpfxsztdzps Afworr Dimensions: L x W x H 1.5 x 1.5 x 1.5 meters / Weight 450 kg Errors and omissions excepted.

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm Ljdpfozr Ix Nox Afwjrr - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7938 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic pressure - blade guard - pneumatic blade extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 7.5kW - dust extraction nozzle diameter: 120mm - table dimensions (length/width): 740x500mm Lsdpfx Aozrxgdsfwerr - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table height: 900mm - roller table width: 510mm - overall machine dimensions (length/width/height, without table): 1200x640x1280mm - weight approximately 500kg ADVANTAGES - Made in Poland - Original DTR documentation - 2 roller tables - Pneumatic blade adjustment - Used saw, very good condition Net price: 14500 PLN Net price: 3455 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + protractor - crosscut fence length 3000mm - cutting width adjustable with an electric guide from the upper control panel, 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down adjustable from the upper control panel - angle adjustment adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - protractor Lsdjzrwbajpfx Afwjrr - table extension 2000x1530mm - large blade guard - dust extraction nozzle diameter 100mm, 120mm - dimensions L/W/H 3600x3800x1600mm - weight approximately 1200kg Advantages: – Polish production – with a scoring saw – START/STOP switch in the crosscut table – pressure beam – original DTR documentation – unpainted – used saw, very good condition Net price: 29900 PLN Net price: 7120 EUR depending on the exchange rate of 4.20 EUR (Prices may change due to larger fluctuations)