Used Resistance Annealing Machine for sale (65,314)

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Hodpsn R Nhqefx Apnenl

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Hedpfjit Rq Hex Apnonl Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Hnjdohpf Iyopfx Apnel Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure Hedsycv Saopfx Apnjnl - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Hjdpfey N Dukjx Apnjnl Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Hnodpfx Aordf Acopnel Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Hedpfx Apjv Dxm Sjnonl Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment Hsdpshubgzjfx Apnenl - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side Hedodzp Txjpfx Apnenl - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Hnsdpfx Apjht U Snonel Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Hnedpfsx Au Tnjx Apnol Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Condition: used, Industrial Tempering / Heat Treatment Oven – Lister Machine Tools Heavy duty industrial tempering and heat treatment oven by Lister Machine Tools Ltd. Ideal for engineering workshops, toolmaking, heat treatment, metal hardening, tempering and industrial heating applications. Hnjdpfjy R D Tiox Apnol Fitted with digital temperature controller and insulated chamber with front loading access door. Suitable for precision heating and workshop production use. Features: Industrial electric tempering oven Digital temperature control Insulated heat chamber Front loading design Heavy duty industrial construction Mounted on steel stand Suitable for tooling and heat treatment work Condition: Used workshop condition with cosmetic wear from industrial use. Complete and operational. Ideal for engineering shops, fabrication workshops, blacksmithing and toolroom environments. Loading available on site. Viewing welcome. Transport can be arranged. Open to sensible offers.

Condition: used, Industrial Sheet Metal Beading / Swaging Machine (Jenny Machine) Heavy duty manual sheet metal swaging and beading machine in solid original condition. Ideal for fabrication shops, restoration work, ducting, panel making. Fitted with adjustable rollers and manual feed controls. Strong cast iron industrial construction mounted on original pedestal base. Perfect for forming beads, swages, strengthening ribs and edging work in sheet metal. Features: Manual hand operated machine Adjustable forming rollers Heavy cast iron construction Original pedestal stand Industrial workshop machine Suitable for steel, aluminium and light gauge sheet metal Condition: Used industrial condition with age-related wear and surface rust. Mechanically complete and turns freely. Hsdpfx Apey R Dquonsnl Ideal restoration or workshop machine. Loading available. Viewing welcome. Open to sensible offers.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Hjdpfx Aoy R S Unjpnsnl

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Hjdey R Srgjpfx Apnjnl Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee Hnjdpfey R Skcox Apnjl 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Hsdsy R Rdhopfx Apnenl Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2001, XYZ 1224 Surface Grinding Machine Hodpey R N Aisfx Apnonl Electro Magentic Chuck 304 x 609mm Max. Longitudinal Grinding Length 609mm Max. Cross Grinding Length 304mm Max. Distance from Table Surface to Spindle Centre 508mm Max. Longitudinal Hydraulic Travel 660mm Longitudinal Travel Variable 5 – 25m/min Cross Travel Automatic Increment 0.1-10mm Cross Travel Automatic Travel 304mm Cross Feed Handwheel Per Revolution 5mm Cross Feed Handwheel Per Graduation 0.02mm Down Feed Handwheel Per Revolution 2mm Down Feed Handwheel Per Graduation 0.01mm Spindle Motor Speed 3000rpm 50Hz Spindle Motor Power 5hp Hydraulic Motor Power 1Hp Standard Wheel Dia. 355mm Standard Wheel Width 38mm Stand Wheel Bore 127m Machine Weight 1700kgs Foot Print (LW) 3550 x 2550mm Supplied with: 2 Grinding Wheels Balancing Unit Coolant & Dust extraction Toolbox Hydraulic Tanks Diamond Wheel Dresser 415V Electrics Machine Pads & Levelling Bolts Low Volt Work Lamp For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79197 Machine Serial Number: 134046 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Hedpfx Aey N Ak Repnenl Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Hsdpsx Hp I Rsfx Apnonl Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Hedpsy Ni Ivefx Apnsnl Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs Hnsdpfx Apeyzf Naensl For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Hedpexxb Rrefx Apnsnl Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Hsdpfx Apsya H Nkenonl Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. Hnjdpfxoyaywhs Apnsl *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.