Used Road Marking Machine (Never Used) for sale (94,051)

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: M166011 01 G21C, The LineLazer V 250SPS model with paint guns is a self-propelled solvent painting machine with reflective beads designed for large and heavy striping jobs, including painting parking lots and roadways. Pressurised bead system:  Excellent bead application performance Knodpfxst Dlmbj Abvjc  Ensures proper flow of beads Automatic paint gun system  Quality solenoid driven system Remote control control box  Easy to use and highly visible in all conditions 25 gallon paint tank  Less refills  Extended stripping time with high capacity hopper Honda® GX engine  Reliable and easy to start  Oil alarm stops engine to prevent damage if oil level drops too low Electric start  Quick start EasyMark gun adjustment system  Easy gun adjustments  Easy gun adjustment every time  2 gun capability with QuikSelect gun selector Use of front or rear holster Self-centering front wheel  Simple operation  Foam-filled, three-wheel design for stability Additional features  Easy steering adjustment  Durable Chromex pump  High efficiency hydraulic motor  High capacity cooling system  Easy Out pump filter

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Our machine enables the execution of all basic tasks for road marking. It features a line programmer and also offers the possibility of marking edge lines and adjusting the operator’s seat. The machine can be equipped with up to five automatic spray guns for paint and five guns for glass beads. It has paint tanks with a capacity of 192 kg and two 40 kg tanks for glass beads. Self-propelled machine with its own drive system. Line programmer. Pressure system for applying glass beads. The machine is equipped with: three automatic paint spray guns or one applicator for two-component material; three automatic guns for glass beads; one hand gun. Knjdpfx Aboz Tdykevjc Hydrodynamic paint spray system (airless) or dosing system for two-component material in a mixing ratio of 98:2. Two paint tanks, each with a capacity of 60 liters. Pressure system for glass beads with two tanks, each with a capacity of 25 liters. KOHLER drive engine with 25 hp. Hydraulic drive for the paint pump. Paint pump flow rate: 11 l/min. Maximum operating pressure: 228 bar. One nozzle for the hand gun. Three nozzles for marking lines with a width of 12 cm. One nozzle for marking lines with a width of 24 cm. 250 g of oil for the pump piston rod. Three nozzle guards. High-pressure filter with a filter fineness of 50 mesh. Pneumatically raised targeting pointer for aligning the marking. Marking unit mounted on a wheel, which is pneumatically pressed onto the road surface.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Knodpfx Asz Iz Imebvjc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Ksdpfxox D Tbme Abvonc YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Knjdpfx Ajxxb Rrobvec Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Kedpfx Aezzzm Eebvjnc Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Kjdpfjzmuntex Abvjnc Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: + Euroliners + Trassar 201A + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp + Hydrostatic drive Kedpfx Aoyhd E Ssbvjnc + Articulated steering + Protective roof + Rear warning device + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear Knodexal A Ujpfx Abvjc + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Kedpez Sm Shsfx Abvjnc Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Knsdpez Slprefx Abvjc Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Condition: good (used), Brand: Videojet Type: Inkjet Marking Machine Model: Excel 2000 Knedpfxsyt Hmpo Abvec

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: BS-21012, For sale: LASERVALL laser system with a rotary indexing unit (C-axis) - Type: Laservall PH70 - Model: BOX SOL – OWIO 20 EMK - Serial No.: BS 21012 - Year of manufacture: 2021 - Power: 23 W The laser enables marking on various materials, including metals, plastics, ceramics, glass, and stone. It allows for marking on both flat and cylindrical surfaces, as it is equipped with a rotary indexing unit featuring a three-jaw chuck and a simultaneously controlled C-axis. All electronics, the entire software system, and the laser tube were replaced in 2021. The unit has seen very little use and is practically new. It is connected to the power supply and ready for operation. Knjdoz Iytzspfx Abvoc

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: white, Year of construction: 1992, operating hours: 4,470 h, Equipment: air conditioning, cabin, Line marking machine: + Euroliners + Bagheera + Year of manufacture: 1992 + 4,470 operating hours + Vehicle base: Hansa APZ 1003H + Optional 4-wheel steering + Hydrostatic drive + 4-cylinder Mercedes diesel engine + Hand sprayer at the rear + 2x paint tanks + 2x bead tanks + Bead and paint spraying + Sight rod with mirror + Compressor + Airless pump + Line marking computer elexar 20 + Rear warning system Knjdpfx Aew T Tkbobvjc + Air conditioning + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos may occur, interim sale reserved!

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Kedpfszkbirox Abvonc Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, Knodpfx Aboz St Hwovoc 8 Station ATC, coolant, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Kjdpfxsz R Rbds Abvonc Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) Knjdpfx Aszw U T Rsbvsc - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Knjdpfxezi Awhj Abvoc Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, Kedpfx Aez Srv Djbvsnc 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Knodpfx Abezuxn Tsvjc ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Kedpfjzxgglox Abvenc Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. Knedpfx Aboxbck Eovjc The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Ksdpfx Ajzrnkrobvjnc Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Kodpfx Absy S Shwevjnc Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system