Used Roundness Measuring Machine for sale (68,153)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg Dodszcqy Espfx Anzskr The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover Dodpfx Aozrd R Ujnzjkr - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Dedpfxsym Dt Hs Anzekr Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Dkjdpfxozrvg Ue Anzsr Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Dkjdpfx Ajzqc Hrjnzjr The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: used, functionality: unexamined, With this offer, you are purchasing a second-hand ‘Keyence XM-5000’ coordinate measuring machine Dedpfxoy Iaayo Anzokr Items for sale: 1x Keyence XM-5000 with the following accessories Includes a laptop with the relevant software Includes a carrying case Includes a battery charging station Includes a tripod Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: defective spare-parts repository (used), functionality: limited functionality, In this listing, you are purchasing a faulty ‘Keyence XM-1200’ coordinate measuring machine Item for sale: 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Condition: Dkedpfeyrcx Sox Anzsr This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device is not in working order Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Djdpfx Aezr E H Rsnzekr Price: Euro 27,500.00 plus VAT, ex works

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Shop Floor - additional bellows on the X & axis HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Dkedpszimrvofx Anzsr Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 190705251GC, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, UK DELIVERY ONLY OPTIV Performance 3.2.2 Bench top 10x CNC Zoom HP-S-X1C Tactile Scanning Probe 3 port changer rack Djdpfxszibg Ij Anzokr PC-DMIS Measurement Software ISO 10360-7:2011 at 18-22 °C = 1.5 + L / 250 μm ISO 10360-2:2009 at 18-22 °C = 1.9 + L / 250 μm

Condition: like new (used), Year of construction: 2013, Technical specifications: Dkjdpfxjzrfmws Anzor Measuring range, X-axis: 700 mm Measuring range, Y-axis: 650 mm Measuring range, Z-axis: 500 mm Size of granite plate: 1330 x 962 mm Dimensions (width x depth x height): approx. 1400 x 1200 x 2450 mm Weight: approx. 800 kg Condition: Condition is nearly new, very little used. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2010, A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 575kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible. Dodpfx Anjztdt Sjzskr

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg Dkjdpfoxb Eg Nsx Anzjr table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 250 t dimensions of the machine ca. 1300 x 1000 x 1600 m Djdpfx Aox Szp Dsnzjkr

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Dksdpfjzn Iucjx Anzjr Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Right and left rotation via foot switch Dedozl Dngjpfx Anzekr Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, in very good condition, fully functional. Smoke-free environment, no damages. ✅ Technical Specifications: Magnification: 0.1× to 5,000× (current configuration up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8" CMOS Frame rate: up to 50 images/sec Depth of field: High depth of field even in live image Measurement functions: 2D and 3D measurements (angles, areas, volumes, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg ✅ Special Features: Dedpfx Aextbpdsnzjkr Fully automatic image acquisition and measurement Observation from various angles without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of Delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g., VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection by prior arrangement

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Manufacturer: Mitutoyo Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) Djdpfx Anow Hqrwozjkr With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: Dsdpfx Anjzp Igzszekr X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: good (used), Year of construction: 1987, measuring range X-axis: 1,970 mm, measuring range Y-axis: 1,470 mm, measuring range Z-axis: 1,220 mm, table width: 2,080 mm, table height: 500 mm, table length: 3,490 mm, Very special price: LK Portal measuring machine, model G80 Measuring Capacity Measuring Capacity Y: 1470 mm Measuring Capacity Z: 1220 mm Clearance Under Bridge: 1350 mm Table Size: 3490 x 2080 x 500 mm Electrical Supply: 220 V 50 Hz Heidenhain EXE: EXE 829 Heidenhain Scales: X Axis Main LIDA 225 / 2040 mm Heidenhain Scales: X Axis Sync LIDA 225 / 2040 mm Heidenhain Scales: Y Axis LIDA 225 / 1540 mm Heidenhain Scales: Z Axis LIDA 225 / 1340 mm Year of build : 1987 , in use 1991 Dedpswip H Sofx Anzskr Granite clamping table dim.: 3490x2080x500 Longitudinal displacement: 1970 mm Transverse displacement: 1470 mm High displacement: 1220 mm Year of construction: 1987 , in use: 1991 Incl. Renishaw measuring system

Condition: excellent (used), CATALOGUE NUMBER 8015 TECHNICAL DATA - Range of diameters of processed pins: 40-140mm - Max. diameter of input material: 210mm - Min. length of input material: 600mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 100mm - Cutting head drive motor: 18.5kW - Feed: + forward/backward - Feed motor: 3.73kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-knife cutting head - 6 smooth draw rollers - Dimensions (L/W/H): 2600x1200x1390mm - Weight: 1700kg ADVANTAGES - Polish production - DTR documentation - Used turning machine, very good condition Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR Dkodpfxjztafks Anzsr (Prices may change due to higher fluctuations)

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Dedpfx Aoyiy Hbjnzekr Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Dkedpfozix Nmox Anzjr Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers Dkodpfxjzrui Ie Anzor - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Dkedpfx Aoztc A Ssnzjr