Used Schraml Glastechnik Glass Drilling Machine for sale (67,549)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Lhsdsh Ek H Sspfx Aifoi Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg Lodpfx Aiozmwrnofshi If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm 2. Width: 1800 mm / with arms extended Height: 1600 mm Depth: 1200 mm Lhsdpezfhd Eofx Aifsi Condition: good, second-hand

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table Lhedoiy Dxkepfx Aifei With manual positioning Water tank with pump included Very good and clean condition Availability immediate

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm Lhedpfxsyub Azs Aifsi

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Lhodpfx Aioyc Egysfsi

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Lhedpexg Ngqofx Aifsi

Condition: used, • Type: W125 • Year of manufacture: 1989 • 2 brushes / water tank, pumps Lsdpjyucwyjfx Aifohi • Running direction: Right to left • Open top • Washing brushes 130 cm high • Heating • Price on request

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Width: 1850 mm Height: 1800 mm Depth: 1200 mm Lhodpjw Sdwisfx Aifoi

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Total length with side tables: approx. 2520 mm Ljdexrp Niopfx Aifjhi Depth max. approx. 1170 mm Height max. 1550 mm

Condition: good (used), • Model – FMF 100 Lsdpouqma Aefx Aifshi • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Lhjdpenp I N Aefx Aifsi

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Ljdpfxey Nltnj Aifjhi Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Lhsdeyfrvyjpfx Aifoi Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Lhodex Rp Rgopfx Aifji

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: AQUATEC SC 80-M, Cleaning centrifuge for grinding water top-CLEAR Aquatec ZF 80-M See pictures Lsdpezmf Ttefx Aifshi Used for only a short period.

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Schraml Modula 16 Super 6, manufactured in 1999. Vertical flat glass washing and drying machine, washing height 1600 mm, 6 brushes, open top. Glass thickness 3-12 mm, working height 550 mm, working direction from right to left, inlet section 2800 mm, outlet section 2800 mm, light panels at the inlet and outlet, automatic start-stop system, recirculation system with water tank and water pumps. The machine is in good condition and is available immediately. Ljdpfezcxa Tex Aifohi

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM. Ljdpfx Aijyy Rn Sofshi

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Lodpfezkt A Rsx Aifohi Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Model: ZB 32 Lhjdpjzlhlpofx Aifei Capacity: 2.5-32mm With Cams

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Lhsdpfx Aiozlg Szofsi Model: 108

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Lsdpfx Aiozdki Uefshi Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Ljdpszi Tqlofx Aifjhi Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Lsdjzmuntepfx Aifohi Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Lhedpfx Ajx Dcfhoifji Speed: 68 - 1,270 RPM Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Machine dimensions: 1,000 x 700 x 2,400 mm