Used Scm / Dmc Sd 60 Rrcs for sale (23,776)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Nsdoz Rzyvjpfx Abuswn Vacuum table included. For sale due to new acquisition.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment Njdpfxetwqn Sj Abuswn - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Nwodpfxjitvkuo Abuon Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position Nwsdjzydafjpfx Abujn - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: ready for operation (used), Year of construction: 2012, Are you looking for a solution for efficient and environmentally conscious operations? Then a waste compactor is the solution to your waste problem! These powerful and reliable waste compactors are suitable for compressing various materials such as cardboard, plastic, textiles, and other materials. The machines process the waste into bales. Ideal for companies that want to save space and recycle. Specifications Nsdj Adrtrspfx Abuown Brand: DIXI Type: 60 SD Year of manufacture: 2012 Pressing force: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Feed opening dimensions: 115 cm x 80 cm deep x 55 cm high Video available upon request Transport available upon request

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: Nedpfx Aoz Rmxdobuewn - Working width 1100 mm, working thickness 4 to 170 mm - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Nwsdpfezx R Dnex Abujn Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: Nwsdpfx Asx Dlgnsbusn X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight Nwjdezuzbcjpfx Abujn - Capacitive

Condition: used, Year of construction: 2006, operating hours: 77,700 h, functionality: fully functional, machine/vehicle number: 1143 000195 3, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 64 kVA, controller manufacturer: Siemens, controller model: SIEMENS 840 D, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 630 mm, table length: 530 mm, table load: 400 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 34,700 h, spindle motor power: 64 W, number of slots in tool magazine: 120, input voltage: 400 V, pallet spaces: 5 euro pallets, Equipment: chip conveyor, documentation/manual, We offer this used universal machining center, a DECKEL MAHO DMC 60 T RS3, manufactured in 2006. Apparent power: 64.2 kVA Maximum rated current: 93 A Nwjdpfx Aszg U N Rsbuen Rated current: 100 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: Nodpod E Ixzofx Abuswn • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable Nodpfx Aozyghlsbuewn

Condition: used, total width: 1,650 mm, total height: 1,750 mm, Year of manufacture: 2013 Colour: White Empty weight: 2.600 kg Dimensions (LxBxH): 415 x 165 x 175 cm - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left Nwedpfx Aozwuh Iebuen - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Nwsdpfx Aozuyk Nebusn Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 550 mm z-travel 500 mm control TNC 426 Njdpfxo Adchys Abujwn table-size 900 x 550 mm taper ISO SK 40 speeds 18000 U/min total power requirement 50 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes

Condition: ready for operation (used), Year of construction: 2005, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2005 Nwjdpsz I Rfhefx Abuon Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: excellent (used), SCM K360 HP Edging Machine Liquids Pre-milling cutters, Nedpfez Hl E Tox Abuswn Plate heating Edge banding with roller, Replaceable tank Pneumatic pre-cutter, Trimming saws Up-and-down milling unit (multi milling cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine has NC control. Max. element height: 60 mm Max. edge banding thickness (in roll): 3 mm Feed speed: 11 m/min Original mileage: just under 19,000 meters. In my opinion, the technical condition is very good. The machine can be inspected and tested on site.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection. Njdpfx Ajz Atpnobuewn Details see attachment and available upon request. The following parts have been removed: Axle control module PCU Control unit for cooling system

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion Njdpfx Ao Ad Hatebuown system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems Nwsdpfx Abjz I Ti Aeujn

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Njdpfozcmcvjx Abuown Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized Nwodpfezv Tibex Abusn - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMC 60 T RS 3 Nwedpfx Ajzi Dy Robusn Control: Siemens 840 D Year: 2007 new spindle: 2025 Neue B-Achslager Geometrieprotokoll vorhanden Neue Scheibe Neuer Klemmring SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 780 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis Panning head Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger: Kettenmagazin / chain magazine Tool capacity: 180 Tool lenght: 315 mm NC rotary table Palett size: 630 x 500 mm Palett system Amount of paletts: 5 Equipment Chip conveyor cooling system Internal cooling: 40 bar Air blow Roto Clear

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Njdjzxchljpfx Abuewn Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: like new (used), SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 4 kW / 40 mm - Spindle 5: Universal / 4 kW / 40 mm - Spindles: 5 - Working width: 230 mm - Working height: 120 mm - Feed: 3 kW Nwjdpfxjz Nyfzs Abuon - Planing table length: 2,000 mm