Used Sheet Extruder for sale (8,981)

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Kedeyvh Ubopfx Aqqjdr Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. Kdsdpszti Tkjfx Aqqsr This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Kdjdpfx Aqozvmy Hjqor Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. Kjdezvc I Hjpfx Aqqedr With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Kedpfowivdkex Aqqjdr

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Kdjdpfx Aevbcbueqqer Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Ksdpfxezp Dwpo Aqqodr Hours: 11,800 Location available upon request Images available upon request

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Cold Feed Rubber Vacuum Extruder 150mm 20d manufactured by years: 2020 condition in new Equipment type E150-01-00 Screw diameter 150 mm Screw Speed 1-50 r/min Max output Around 1000kg/h Temperature control system The heating section number/power 6kw×7 Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head External dimensions 4200×1600×1500 (L×W×H)mm Extrusion system The feeding way Side rolls transmission power through the screw, active feeding. Feeding structure Feed roller gear and the screw gear, and with automatic lubricating device. Screw material 38GrMoAcA Screw hardness HRC65-68 hardness of steel sleeve HRC65-70 Nitriding depth 0.4—0.7mm Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor L/D 20:1 Cooling section 1 section (side rolls) Kdodpfxey Ez Erj Aqqsr Vacuum pump power 2.2 KW Temperature control Automatic control heating, cooling by electromagnetic valve Circulating pump brand Weile Cooling water pressure 0.15-2 kg/cm2 Temperature control accuracy ±1℃ Screw and the gear box Involute connection Drive of the motor and the reducer Belt drive Hardened reducer model Reducer (involute) ZLYJ420-28-I speed regulation Frequency conversion 2. Rubber sheet head(Pneumatic) 1 Equipment type E200-PDJT-03-00 2 Equipment use With the use of extruder, extrusion foaming plate for expansion Dimensions 1170×510×330 (L×W×H) mm Head Material 40Cr Heating mode By mold temperature unit, the water cycle control Heat treatment Quenching and tempering, carburizing Surface treatment electroplate runner structure Straight type

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Kdsdpfx Aqjx Apckjqsr

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: Kjdpfx Asy Exrpjqqsdr 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Kdodpfszuwvvsx Aqqor Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, Kdjdpfx Aqsy U H Hmeqsr ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h Kdedpfjn Utt Hex Aqqjr * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Kdedpfx Aqozump Eeqor Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Kodpfxozux N Re Aqqedr Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Round: 45mm Square:45mm Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit Ksdsxwnb Iepfx Aqqedr No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2010, condition: excellent (used), functionality: fully functional, COMPLETE AMUT SHEET EXTRUSION AND ILLIG THERMOFORMING LINE AMUT sheet extrusion line: Maximum operating speed: 30 m/min Main extruder (layer A): EA100 / 35D Right co-extruder (layer B): EA600 / 33D Materials processed: PP, PS, or HIPS Hourly production: up to 450 kg/h Maximum usable width: 720 mm Sheet thickness: min/max 0.15 / 1.8 mm Amut sheet extrusion die Calender with a width of 1000 mm Diameter of heating rollers: 600 mm ILLIG thermoforming machine Model: RDKP Kodpfx Aqszgtf Djqjdr Maximum sheet width: 805 mm Maximum roll diameter: 1600 mm Various molds included 4 complete lines available Year: 2010

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 331.00465, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 16 t, stroke length: 100 mm, operating speed: 90 mm/s, overall weight: 950 kg, Model:PE6-16 Kdodezux Rujpfx Aqqsr Pressure/Tonnage: 16 Tons Distance Over Bed: 600mm Full Length Top and Bottom Tooling Guarding Control: CNC 402

Condition: used, functionality: fully functional, Used Lehmann UMT extruder. Suitable for a wide range of applications including food, biogas, substrates, wood fibre, and more. Contact for further information. Kedpfsyxfg Tjx Aqqsdr

Condition: used, Year of construction: 2007, 2007 Extrude Hone OrbiTEX 150 Orbital Abrasive Flow Polishing & Finishing Machine With Advantech Controls Control Ksdpfxezt N Dpo Aqqodr Maximum Workpiece Ø198mm, Maximum Workpiece Length 300mm. Voltage 400V. S/No. ORB06-1451 (2007). Weight 2,100kg.

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Kdsdpfx Aqsxwcwwoqjr Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Kdjdpfjzulh Tjx Aqqor Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,159 h, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, number of axes: 3, This 3-axis HAGE 3D Precision One was manufactured in 2023. It features a generous build volume of 500 × 700 × 800 mm and a maximum printing temperature of up to 450 °C. The printer is equipped with a heated build chamber and print bed, ensuring optimal conditions for high-temperature plastics. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Precision One industrial FDM/FFF 3D printer we have for sale. Contact us for further details. • Heated Build Chamber: Up to 150 °C • Heated Print Bed: Up to 180 °C • Maximum Printing Temperature: Up to 450 °C • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Approx. 350 mm/s • Servo Motors with Ball Screw Drives in X, Y and Z Axes • Automatic Print Bed Calibration via Multi-Point Topography Measurement • Vacuum Print Bed • Water-Cooled Triple DSD Print Head • Adjustable Feed and Contact Pressure • Short Filament Feed Path • Free Lift of the Inactive Extruder/Nozzle • E1: Standard Hotend • E2: Backup Hotend (Filament Run-Out Detection) • E3: High-Flow Hotend (Extra-High Material Deposition Rate) • Heated Build Chamber Suitable for High-Temperature Plastics • 360° Component Temperature Management • Targeted Part Cooling up to 4.8 m³/h • Activated Carbon and HEPA Filtration System • Highly Effective Filtration of Macro-, Micro- and Nanoparticles (VOCs and Volatile Solvents) Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C Kedpfx Aozk E Eksqqjdr • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Kedpfx Aezvwbueqqedr Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Excellent condition Kdedpfx Aqezc Rucsqer No heavy use