Used Single-Column Eccentric Press, Eccentric Stamping Press, Punching Machine for sale (73,691)

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Bsdpfx Amei Db Ibj Tjdf Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz Bsdpfxex U Eias Am Tedf - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm Bjdpfx Ajk S Htxom Todf - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Bsdpedzqltefx Am Tedf Good condition

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Bdjdjtx E Rqepfx Am Tjf Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Bjdsu Rwa Iepfx Am Tjdf Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Bsdpfx Amei A A Tbe Todf Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram Bdjdofim Thjpfx Am Tof - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Bdodpfx Amjv Tp D Ho Tjf Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Bdjdpfx Amedzqddj Tef Good condition (very little use)

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS Bdjdpfxstx E N Tj Am Tof - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm Bsdpfxsy Nd Svs Am Tedf hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm Bdedpfxoyrhpvo Am Tof 195 mm 297 mm 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm Bedpfx Ast Ei Hnjm Tjdf ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Year of construction: 2004, pressure 25 t Bdodpeykb D Defx Am Tof throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW weight of the machine ca. 2,8 t

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm Bjdpfx Ameykb Dke Tjdf stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. * Bdsdpfsu N Dfhex Am Tef

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Bedpfozkmi Dsx Am Tsdf Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), Manufacturer: DIGÉP Bdodpfjm Uc R Aex Am Tof Tip: SD 100

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch Bedpsv Uraaefx Am Tjdf - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m Bodsu Nfkljpfx Am Tjdf further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t Bdodpfx Aou Nfizem Tof stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min Bodpfx Aou Nfkxsm Todf distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Bdjdpfx Ameu N Ddwj Tsf accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m Bsdpfeu N A Uusx Am Todf dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *