Used Staehle-Hess Sanding Machine for sale (65,917)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Itodpfx Aaet Tqy Ee Rsl Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. Isdpex Dng Dsfx Aa Retl (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Iedey Spvlopfx Aa Rjtl Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Iedpsffyc Nofx Aa Rotl Support table at the idler pulley, Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale.

Condition: like new (used), Year of construction: 2007, total length: 1,700 mm, total width: 900 mm, total height: 1,200 mm, overall weight: 300 kg, height adjustment type: electric, grinding belt length: 2,650 mm, grinding belt width: 150 mm, Volpato edge sander – MADE IN ITALY! - Working height: 150mm - Sanding belt length: 2650mm - Mechanical sanding belt oscillation - Main motor: 2.2 kW - Control panel - Sanding at angles from 5 to 90 degrees - Year: 2007 Machine dimensions: - Length: 1700 mm - Width: 900 mm Ijdpfxjzxyuvo Aa Retl - Height: 1200 mm - Weight: 300 kg Machine testing is possible on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl We have the following machines available: band saws, circular saws, crosscut saws and panel saws, planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planers, 4-sided, 3-sided, three-sided, two-sided, thicknessers, jointers, sanders, planers, combined planer-jointers, combined planer-thicknessers, combined jointer-thicknessers, thicknesser-jointers, cleaning machines, mortisers, tenoners, parquet machines, trimmers, edge trimmers, machines for log homes, milling machines, routers, spindle mounters, top routers, bottom routers, sanders, wide belt sanders, throughfeed sanders, roller sanders, disc sanders, angle sanders, jointers, drills, drilling machines, horizontal, radial, milling machines, multi-spindle, edge banding machines, edge banders, veneer machines, presses, lathes, sawmills, briquetting machines, chippers, wood chippers, dowel machines, mortising machines, dust extraction systems, extractors, fans, compressors, sharpening machines, multi-functional machines.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support Iedjzwx Huspfx Aa Rotl • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Availability: • After delivery of the new machine in December 2026 / January 2027.

Condition: good (used), Year of construction: 1995, For sale is a used Langzauner LZK 3/2 edge grinding machine with a grinding belt length of 2600 mm. The machine is in good condition and has been inspected by our qualified personnel. Itjdpfxsz Anxde Aa Rjl Technical data: - Table size 980 x 340 mm - Grinding belt length 2600 x 150 mm - With oscillation - Incl. veneer grinding attachment - Incl. feed mechanism - Motor power 2.4 kW / 3.3 HP - Year of manufacture 1995 The machine is located in A-5431 Kuchl and can be inspected during our opening hours. Related terms: grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: R-F13KS

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox Itjdpfx Aaezkbire Rel For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° Isdezyuckopfx Aa Rjtl 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, For sale is a used Holzprofi edge sanding machine, model KS 2260, with a sanding belt length of 2260 mm. The machine is in very good condition and has been inspected by our qualified technicians. Itodpfx Aoz Ay H Hea Rsl Technical specifications: - Table size 750 x 250 mm - Sanding belt length 2260 x 150 mm - With oscillation - Dust extraction port Ø 100 mm - Motor power 2.2 kW / 3 HP - Year of manufacture 2024 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: sanding machine, edge sanding machine, edges, KSM, KSM 260 Reference: R-L07JU

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Iodpewyda Uofx Aa Rjtl Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. Itodpfx Aajrpi E Aj Rjl The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool.

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Ijdszqgg Ajpfx Aa Retl Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. Itedjztxqfepfx Aa Rel - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! Itjdsy Sap Aepfx Aa Rjl The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09103, COMANDULLI Model EDILUX 7+4 DX • Belt running direction: RIGHT to LEFT, year of manufacture 2003 #09103 • 7 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Coating support, manual height adjustment • Separate control panel on a swivel arm • Table extension console • Water trough • Machine footprint approx.: 440 x 180 cm • Infeed area approx.: 190 x 60 cm • Outfeed area approx.: 150 x 60 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments & accessories in the pictures are not included with the machine/scope of supply. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness Warranty • Machine sold “as is”, excluding any warranty claims Iodpfx Aszz Nfcja Rotl Inspection possibility • at the operating site near Cottbus Availability • after delivery of the new machine in December 2026 / January 2027

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with Iedsy A D Ecopfx Aa Retl digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Ijdoy Iu N Aspfx Aa Rjtl Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. Isdpfx Ajzdvupsa Rstl The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 01810, 7 Face grinding supports 2 Top chamfering tools 2 Bottom chamfering tools 1 Water groove milling support 1 Milling support Infeed and outfeed roller conveyor Belt running direction: left to right Water trough Itjdpezy Eh Rofx Aa Rol

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, Iedezxz Taepfx Aa Rstl 150mm wide abrasive belt, Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement Itedpfxjvkgvhe Aa Rsl - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: used, Second-hand machine Year of manufacture: 1988 Condition: well-maintained Features and technical specifications: Itsdpezk Ny Eefx Aa Rjl - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Used Machine Features and Technical Specifications: - With left-side support table - With built-in dust extraction system - With work table 750 x 300 mm - Motor: 2.2 kW Itodpfxozyy A As Aa Rjl - Belt speed: 22 m/s - Sanding belt length: 2280 mm - Sanding belt width: 150 mm - Footprint: 1400 x 770 mm - Weight: approx. 255 kg

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; Itodpfxswgc D Sj Aa Rsl The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm