Used Stromab Frame Press for sale (19,115)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 Ksdscmat Uopfx Agnolt pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, Year of construction: 1997, machine/vehicle number: 15109, functionality: fully functional, power: 1 kW (1.36 HP), Equipment: CE marking, I am selling a RAMARCH PN31 frame press. Year of manufacture: 1997. Kodpfx Aslu Hhcognslt Maximum workpiece dimensions: 2500 x 1300 x 600 mm. Electropneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA). In good condition. Available immediately.

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. Kedpfx Agsdzp Trenelt During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Klsdpfx Aov Uraaegnjt Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Working width 3500 mm Working height 2500 mm # 6913 Hess Quickstep frame press ----- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) ----- General ----- Working width: 3500 mm Working height: 2500 mm Features: ----- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, Klsdpfx Asy S Diysgnjt the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m Ksdpfetqqq Rjx Agnjlt - with die cushion - with light bareer make SICK

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Maximum working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch Klsdpfxsy Sx Uwe Agnet - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Kodpfx Agjiwfhwjnolt Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Ksdpfx Aey Rtg Eegnjlt

Condition: good (used), Hess HYDRO-LUX hydraulic frame press Ksdoy Srygepfx Agnolt

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Klodpfx Agodntc Nenot Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: excellent (used), Overall dimensions: Width 100 cm, Height 245 cm, Length 590 cm. Working height: 155 cm, Width 55 cm, Length 400 cm. Pneumatic. Klsdpsy Tkb Ejfx Agnjt

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Ksdpfx Ajy Hqz Segnelt Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Kljdpfxsvvkmbs Agnjt

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Ksdpfx Agsyz Dxasnolt

Condition: used, Year of construction: 2009, machine/vehicle number: 184, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,400 kg, We offer a used FAMAD HSKG 6.6 hydraulic press, manufactured in 2009. Type: HSKG 6.6 Factory number: 184 Year of manufacture: 2009 - 4 loading stations - loading height: 1140 mm - length of strips in one station: 2200 mm - maximum strip width: 150 mm - maximum length of glued elements: 6600 mm The press is in good working order and fully functional. It can be inspected while in operation. Net price is negotiable (invoice available). Weight: ~4400 kg Type of current: ~ Frequency: 50 Hz Operating voltage: 3 x 400 V Control voltage: 24 V Kodpfjy Th E Usx Agnelt Power: 4.0 kW Nominal current: 8.9 A If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Klodpjxmr Rxjfx Agnjt Powered by a hydraulic unit.

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Kedpjlqxg Hjfx Agnslt Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: excellent (used), Working length 250 cm Height 136 cm Width 60 cm Klodpewgky Uofx Agnjt Pneumatic drives Electric lifting

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Kodpfxsyx Nubj Agnjlt Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is provided subject to change until the machine arrives at our warehouse. Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Pressure system: electrohydraulic Press pressure: per cylinder Kledpey A Hkzofx Agnet Cylinder stroke: mm Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Kljdpfxoyr Ek Re Agnet Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Kljdpfjyr D R Nsx Agnjt Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Kedpsyrr Rkjfx Agnslt Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Kodpfxebnnyis Agnelt Weight: approx. 250 kg in mobile version