Used Taski Swingo 4000 - 2019Y - 1744Mth for sale (2,529)

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,744 h, functionality: fully functional, working width: 850 mm, area performance: 6,375 m²/h, overall weight: 805 kg, warranty duration: 12 months, water tank capacity: 200 l, TASKI SWINGO 4000 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 Machine has 1,744 hours of operation. 850mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. Iiedpow A Il Tefx An Nsf A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 6375 Clean/dirty water tank capacity (l): 200/210 Working speed (km/h): 7.5 Number of brushes (pcs): 2 Weight without batteries (kg): 295 Total weight, ready to use (kg): 805 DIMENSIONS: Length with squeegee (mm) 1780 Height (mm) 1400 Width with squeegee (mm) 1100 Width without squeegee (mm) 890W INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 430mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hoses Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 200-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (850 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 1,681 h, functionality: fully functional, working width: 550 mm, area performance: 3,025 m²/h, overall weight: 380 kg, warranty duration: 12 months, water tank capacity: 75 l, TASKI SWINGO 2100 µicro SCRUBBER Iodpfxoymd S No An Njif NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2021 with 1681 hours of operation 550mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Taski Swingo 2100 µicro Power supply voltage: 24 V Brush working width (mm): 550 Suction width (mm): 630 Theoretical capacity (m²/h): 3025 Clean/dirty water tank capacity (l): 75/75 Working speed (km/h): 5.5 Number of brushes (pcs): 2 Brush rotation speed (rpm): 190 Weight without batteries (kg): 185 Total weight, ready to use (kg): 380 DIMENSIONS: Length with squeegee (mm) 1380 Height (mm) 1280 Width with squeegee (mm) 630 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW 280mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the cleaned surface. The large working width (550 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, functionality: fully functional, TASKI Swingo CO755 Automatic Cleaner and Scrubber-Dryer Iisdpfxewlq Ebj An Njf (internal article no. REI_001) Name: TASKI Swingo Drive: ELECTRIC Hand-held Condition: see photos / good condition Manufacturer: TASKI Model: Swingo CO755 Electric-operated 24 V 600 W 100-240 V 50-60 Hz 300 W Max. 155 kg Year of manufacture Integrated charger Fully charged battery Self-propelled forward and reverse Charging current: 240 Scrub brush missing Price quoted upon pickup from warehouse 47441 Moers Various cleaners and scrubber-dryers in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. Further information about the item cannot be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment by phone. The item can be picked up immediately if required. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €150 net, depending on distance.) All dimensions are approximate.

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. Iodszvc I Hjpfx An Neif With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: used, Year of construction: 2018, 4020 Bystronic Bystar Fiber laser 10KW in splendid condition. Immediately available. More information on request. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 4000 x 2000 mm Iiodpfozuw Swex An Nsf Cutting hours: 15000 Laser output: 10000W

Condition: used, Hankook Protec 9NC/4000 4m Between Centres, fitted with 630mm Diameter 3 Jaw chuck with 250mm bore, also 800mm 4 jaw with 250mm bore , and 770mm rear mounted 4 jaw with 250mmm bore. 720mm Swing Over Saddle, 1000mm Swing Over Bed, Year 2008.3, Full length Swarf Conveyor, Fanuc 21i Control. Fitted with Duplomatic BSV-N250-8/25-220-380/60L. Available now under power at site to view, available now for supply. Specifications: Iiodex I R Emjpfx An Nef Swing: 37.4" Machining Length: 157" Power: 26 kW Max RPM: 630 RPM

Condition: good (used), TASKI Swingobot 2000 autonomous scrubber dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine type: Autonomous scrubber dryer Condition: used, fully operational Operating hours: approx. 38 hours Serial number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Weight: 471 kg Working width: 700 mm Suction nozzle width: 900 mm Fresh water tank: 90 l Operating time: up to 4 hours Theoretical area performance: up to 1,260 m²/h Protection class: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg Iedpfxszd Eyuo An Neif

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Iiodezma Tbspfx An Njf Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Iedpox Ehibjfx An Nsif Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Ijdpfx Aney Hkqyo Njif Manufacturer - EME. Serial Number - 15066. Date of manufacture - 2015. Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840 D-SL, rotational speed (max.): 16,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, Heller FP 4000 + SCHULER LoadMaster Compact Year of manufacture: 2013 Control system: Siemens 840 D SL Operating hours: approx. 40,000 h Spindle hours: approx. 20,000 h Spindle: SCU 63 unit, 16,000 1/min, 40 kW, 80 Nm X-axis: 800 mm, Y-axis: 800 mm, Z-axis: 1000 mm 4th axis (table/C-axis): NC rotary table, pallet size 500 x 630 mm 5th axis (head/B-axis): Swivel milling head (swivel range approx. +15° to -105°) Rotary table: 360,000° x 0.001° Power dynamic: 60 m/min 2x pallets GRM with DIN hole pattern Tool holder: HSK 63 A Wireless measuring probe, manufacturer: RENISHAW Tool magazine: 240 positions (chain type) PMS multiple clamping Chip conveyor for wet machining - Monitoring + collision detection Fast drill breakage detection NC rotary table Special design KMA Iisdpfx Ajztmhlen Njf Interface for extraction system Schuler Loadmaster Compact: LMC 900/FP4000 19x additional pallets with DIN hole pattern Siemens control system Available very soon Loading and disassembly possible

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Iiedpfx Asy Dtyren Nef

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Iodpfxezp H R Ej An Noif Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). Ijdpfx Anorfucqe Neif 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Iijdpozrl H Rofx An Njf Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Iijdpfxezdfb He An Nef Specifications: Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: 4 Lugs

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Ijdpfszulxfsx An Nsif Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures. Iiodpfx Anozuyg Re Nof

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 48390-115-3078, We are offering this ready-to-use Metso M&J 4000 M pre-crusher, manufactured in 2012. Manufacturer: Metso Model: M&J 4000 M Serial number: 48390-116-3078 Isdpfx Aozm Eiuen Noif Year of manufacture: 2012 EC type approval: e1*97/68HA*2004/26*0346*00 Machine no.: 14 of 50 Engine ID: 942.992-C-0837-242 If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Isdezma Skepfx An Nsif

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: Ijdpfxoy Awcbo An Noif (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Ijdjzrl Dpepfx An Neif Table load capacity: max. 1000 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Iiodszp Hkxepfx An Njf Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 80317, input voltage: 380 V, travel distance X-axis: 4,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 235 mm, Machine full working order use every week Iisdpfx Anoy Au Rpj Nsf

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,399 h, machine/vehicle number: 1897, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2025, This 3-axis Bystronic BySprint Fiber 4020 4kW was manufactured in 2019. It offers a maximum sheet size of 4000 x 2000 mm and a powerful 4000-watt laser. If you are seeking high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 4kW machine. Contact us for more information. • Machine features a new cutting head (April 2026) • Max. sheet size: 4000 x 2000 mm Iiodpfoy I Strjx An Nsf Additional equipment • ByLoader (included)