Used Tbma Galahad 750 Special for sale (12,722)

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, December 29, 2015 847,500 km Euro 6, 6x4, I-Shift, Dynamic steering = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Bsdpfoz Ahwtsx Al Ajdh - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, Bdjdpfxozz Svqs Al Ash 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 630 mm, Tested forklift battery for your truck – 48V 6PZS 750AH – Special tray + 1 year warranty + Includes Aquamatik battery watering system + Includes terminal discharge cable & REMA 320 plug (other connectors can be installed upon request) + Capacity: at least 90-100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 630 mm Height: 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Still FM 20 Jungheinrich EFG 220 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFX 413 Jungheinrich EKX 410 Jungheinrich ESE 533 Toyota 8FBE16T Toyota 8FBE18 Toyota 8FBE18T Toyota 8FBMT16 Toyota 8FBMT18 Toyota 8FBMT20 Crown SCT 60 Atlet EF 180 Atlet EF 200 Atlet ET 180 Atlet ET 200 Atlet UHS Baumann EX 25-40 Caterpillar EP-FB18 Caterpillar EP-FB20 Caterpillar EP16 Caterpillar EP16/18PNT Caterpillar EP18 Caterpillar EP18/20 Caterpillar EP18/20KT Caterpillar EP18/20NT Caterpillar EP18KT Caterpillar EP18PNT Caterpillar EP20 Caterpillar EP20KT Caterpillar EP20PN Caterpillar EP20PNT Bdodpoy Rnt Hsfx Al Aeh Caterpillar F35 Daewoo B16 X Daewoo B16 X-5 Daewoo B18 T Daewoo B20 T Doosan B16X Doosan B16X-7 Doosan B18-5 Doosan B18T-7 Doosan B18T-AC Doosan B18X-5 Doosan B20T-7 Doosan B20T-AC Doosan B20T/X Doosan B20X-7 Doosan BT18T Doosan BT18T-5 Hyster H1.75XM Hyster J2.0XMT Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Komatsu FB18 Komatsu FB20 Mitsubishi FB16 Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB20KC Mitsubishi FB20KT Mitsubishi FB20NT Mitsubishi FB20PNT Nichiyu FB20P-60BC Nissan G1N1 Nissan G1N1L18 Nissan G1N1L18Q Nissan G1N1L18U Nissan GN01L18U Nissan GN1L16U Nissan TX16 Nissan TX18L Nissan TX20 Nissan TX20L Nissan TX4-18 Steinbock-Boss KE 20 UniCarriers TX4-20 Utilev UT20PTE Yale ERC 18 Yale ERC 20 Yale ERP 16 ATF Yale ERP 18 Yale ERP 18 ATF Yale ERP 20 Yale ERP 20 ATF Common battery sizes available, feel free to inquire. Transport available.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Bdsdpfx Aljz A Iare Aeh Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 583 mm, total length: 1,150 mm, total width: 1,115 mm, Tested forklift battery for your forklift – 80V 10PZS 750AH – special tray + 1 year warranty + including aquamatic system + including end connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Bsdey Rnqlspfx Al Asdh Dimensions: Length: 1,150 mm Width: 1,115 mm Height: 583 mm Weight: approx. 1,860 kg Suitable for the following models and others: Hyster E5.0XN Hyster E5.5XN Popular battery sizes available, please inquire. Transport possible.

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heater, gas spring, and heating element were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Maximum usable height (washing material): 450 mm Maximum batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. Bodjwzwfgopfx Al Ajdh The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is performed using a special nozzle system with wide-band nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level falls below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the washing liquid. A vapor extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Easy-to-use filling system enables a fast workflow. Loading via crane is possible. Price: Negotiable Our asking price is €2,200.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and omissions. Sale is only to countries within the EU.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Unbraked - Foldable - Fold-out ladder Net price: €5,210.08 / Gross price: €6,200.00 Article number: TMJ175441921.01 Technical data: • Brand: TPV Trailers • Model: Mobile hunting stand • Vehicle type: Special trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 442 x 199 x 218 cm • External dimensions (LxWxH): 444 x 188 x 211 cm • Permissible total weight: 750 kg • Unladen weight: 480 kg • Payload: 270 kg • Chassis: Low-loader (wheels next to the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Steel, hot-dip galvanized • Hunting stand walls: 30mm thick, heat-insulated wall panels made of polyurethane • 15mm glued wooden floor, with non-slip screen-printed surface • Right-hand side door • Ladder • 2x windows • 4 swivel crank supports • Rubber spring axle from KNOTT Bdjdpfx Alezy A Ubo Aoh • Pipe drawbar • Support wheel • 13-pole connector • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Bdjdpfx Aloz Hm Ips Aeh Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Steel sheet construction - 2 kart slots - Poly lid Net price: €2,015.97 / Gross price: €2,399.00 Article number: KAE175201500.01 Technical data: • Brand: Vezeko • Model: Kart 2 • Vehicle type: Special trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 206 x 150 x 130 cm • External dimensions (L x W x H): 321 x 210 x 185 cm • Loading height of the floor: 46 cm • Permissible total weight: 750 kg • Unladen weight: 250 kg • Payload: 500 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R13 Bdjdezy A H Rjpfx Al Aeh • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Multiplex floor • 2 fixed galvanized rails for upper go-kart • Lockable, painted poly lid 300 mm high with sturdy fasteners • Lockable double-wing door at the rear • 4 lashing eyes mounted on the floor • Very stable steel frame welded • Frame completely hot-dip galvanized • Very stable V-drawbar, REINFORCED • Coupling head ALKO • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights LED _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm Bodoyc Ewxspfx Al Asdh - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2018, Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Bjdpfx Alsk Abm Hj Aodh Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Bedpfx Alsx Uznfs Asdh Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Bdodsy Ipy Aspfx Al Aoh Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Bsdpfx Alek Abcre Asdh Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Bdsdjk Aa T Rjpfx Al Aeh Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Ramp/door combination - Aerodynamic Polybug - Aluminum walls Net: €3,857.14 / Gross: €4,590.00 Article number: C25275251215.01 Technical data: • Brand: Debon Bdsdpfszy Artox Al Ash • Model: C255 V2 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (German technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 251 x 125 x 156 cm • External dimensions (LxWxH): 370 x 172 x 205 cm • Loading height of the floor: 55 cm • Permissible total weight: 750 kg • Tare weight: 340 kg • Payload: 410 kg • Chassis: Low-loader (wheels beside the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • All-aluminum body, anodized aluminum walls • Wooden floor, Finnish multiplex board with screen printing coating • Full poly roof and front • Aerodynamic roof and spoiler design using polyester • Continuous interior height: approx. 146 cm • Continuous interior width: approx. 126 cm • Rear double door combination (tailgate + door in one) • Side rail system recessed in the floor with sliding eyelets for securing cargo • Interior light • Torsionally stiff chassis • Stable cross members, allowing for high point loads • Rubber spring axle from KNOTT • Automatic reversing system • Knott overrun device and parking brake • Stable V-drawbar • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Automatic support wheel. Special equipment included in the price: • Lockable side door on the front right, 102 x 61 cm (HxB) _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted.

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Bedpfx Alek Abuio Ajdh Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Ramp/door combination - Aerodynamic poly bug - Honeycomb core Net: €3,268.91 / Gross: €3,890.00 Article number: C25375251215.11 Technical data: • Brand: Debon • Model: C255 V2 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 251 x 125 x 156 cm • External dimensions (LxWxH): 370 x 172 x 205 cm • Loading height of the floor: 55 cm • Permissible total weight: 750 kg • Unladen weight: 340 kg • Payload: 410 kg • Chassis: Low loader (wheels beside the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Honeycomb core / plastic composite side walls • Wooden floor made of Finnish plywood with screen-printed coating • Full-poly roof and front • Aerodynamic roof and spoiler front shape through the use of polyester • Continuous interior height: approx. 146 cm • Continuous interior width: approx. 126 cm • Rear hinged door combination (tailgate + door in one) • Recessed track system in the floor with sliding eyelets for securing the load • Interior light • Torsionally rigid chassis • Stable cross members for high point load • Rubber spring axle from KNOTT • Reverse automatic • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic mudguards • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Support wheel • Body splash-proof. Special equipment included in the price: • Lockable side door on the front right, 102 x 61 cm (H x W) _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Bdedozy A Tkepfx Al Aoh We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Ramp/door combination - Aerodynamic poly bug - Honeycomb core Net: €3,268.91 / Gross: €3,890.00 Article number: C25375251215.01 Technical data: • Brand: Debon • Model: C255 V2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 251 x 125 x 156 cm • External dimensions (L x W x H): 370 x 172 x 205 cm • Loading height of the floor: 55 cm • Permissible total weight: 750 kg • Tare weight: 340 kg • Payload: 410 kg • Chassis: Low-loader (wheels next to the body) • Tires: 165/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Honeycomb core / plastic composite side walls • Wooden floor made of Finnish plywood with screen-printed coating • Full-poly roof and front • Aerodynamic roof and spoiler front design through the use of polyester • Continuous interior height: approx. 146 cm • Continuous interior width: approx. 126 cm • Rear double door combination (tailgate + door in one) • Rail system recessed in the floor with sliding eyelets for securing the load • Interior light • Torsion-resistant chassis • Stable cross members, resulting in high point load capacity • Rubber spring axle from KNOTT • Reversing automatic • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic fenders • 13-pole plug Bdsdpezy Ddqsfx Al Ash • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Support wheel • Body splash-proof. Special equipment included in the price: • Side door on the front right, lockable, 102 x 61 cm (H x W) _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Bodpfx Alszbuhdj Aodh

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Bdjdpfjyf Uy Uox Al Aeh Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: used, Year of construction: 1997, Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Bedek Abtljpfx Al Ajdh Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg If you need other dimensions or individual, professional advice, please contact us. Simply contact us by phone or mail or use our filters on our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Bdedpfxsk Aa Uno Al Aoh For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Bsdpsk Aa Ukefx Al Aedh Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Bsdek Aba Tspfx Al Ajdh Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics