Used Terom 22Kw for sale (157)

Condition: used, TEROM PUMPS 22kw Pjdpouua Axofx Alcjra

Condition: used, power: 22 kW (29.91 HP), PUMPS TEROM Psdpfx Ajuuazbslcjra 22kw

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 66 m³/h, operating pressure: 120 bar, type of cooling: air, Equipment: documentation/manual, type plate available, 1 high-pressure piston compressor including acoustic hood and 1500 liter compressed air tank Ran trouble-free until the entire production was shut down. Manufacturer: J.A. Becker & Söhne Type: SV 1101/120 Number of cylinders: 3 Number of pressure stages: 3 Volume flow: 66m³/hour Compression pressure: 120 bar Drive power: 22 KW Speed: 1457 rpm Year of construction: 1998 Compressed air tank Manufacturer: FMS Capacity: 1500 liters Pjdpfx Asvgrp Selcsra Operating pressure: 120 bar Year of construction: 1998 Product data sheet as PDF attached under the ad description !!!

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, Pjdpszt Spnjfx Alcora bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Predpsykn Sbefx Alcoa Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 850 kg, fuel type: diesel, color: yellow, power: 22 kW (29.91 HP), output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 22 kW (29.91 HP), nominal power (apparent): 28 kVA, continuous power: 22 kW (29.91 HP), continuous power (apparent): 28 kVA, total length: 2,100 mm, total width: 950 mm, total height: 1,200 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGE V, type of cooling: water, HELVETICA POWER offers: 22 KW 28 KVA generator / diesel generator ⭐️ Stage V (EU) / Euro 5 compliant - suitable and approved according to the current emission standards for Europe. ⭐️ In an oil-tight chassis, e.g., for construction sites, industry, agriculture, and much more. ⭐️ CE-compliant according to applicable regulations. ⭐️ Soundproof (Super Silent) version. ⭐️ With an emergency power changeover switch / ATS (Automatic Transfer Switch) for emergency power operation. ⭐️ Digital control + built-in remote control. ⭐️ Yunnei Stage V diesel engine suitable for continuous operation. ⭐️ Stamford type (CN license): "CE" certified, high-quality synchronous alternator "brushless" with 100% copper winding. ⭐️ AVR system (load-dependent voltage regulation / Automatic Voltage Regulation). ⭐️ The generator is supplied with a very practical, sturdy yellow tarpaulin cover. Warranty / Guarantee / Service ⭐️ One year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which extends far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe). ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: upon purchase. ⭐️ Delivery possible throughout Europe (mainland) for an additional charge. 🚚 Collection: at the Kefikon (TG, Switzerland) or Konstanz (Germany) warehouse. 🚚 Worldwide delivery on request. 👍 Dealer inquiries welcome - contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Other Models & Configurations ⭐️ Other power classes available (approx. 7 kW to 100 kW). ⭐️ Stage V (EU) / Euro-5 compliant versions. ⭐️ Alternative engine options possible (e.g., Cummins, Deutz, Volvo). ⭐️ Optional equipment: larger tank, additional tank, tank and water heating. ⭐️ Many variants available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keyword list: generator, power generator, emergency power generator, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power unit, emergency power unit, diesel unit, construction site unit 22 KW 28 KVA 30 KW 38 KVA 34 KW 43 KVA 44 KW 55 KVA 19 KVA 15 KW 38 KVA 30 KW 63 KVA 50 KW 125 KVA 100 KW 100 KVA 80 KW Pedpfszwfb Sjx Alcera

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Psdpfx Aoymaxfjlcera

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,800 kg, power: 22 kW (29.91 HP), Technical data: Power: 22 kW Blades: 29 pieces Pedpfx Aoxnznvjlcjra Dimensions: 1800 × 1840 × 1000 mm Weight: approx. 1,800 kg Condition: New and unused On pallet, immediately available for delivery or collection Location: 86554 Pöttmes

Condition: like new (used), Year of construction: 2022, operating hours: 90 h, MAXIEM 1530 Demonstration machine Year of manufacture: 2022 Pump working hours: 90h Psdstq Emxspfx Alcsra Equipment: • M30 pump with 30HP (22kW) power; • Worktable with a head operating range of 3048mm x 1575mm; • Control computer with Windows 10 and software; • Cutting head integrated with diamond flange; • 300kg abrasive feeder.

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Pedpfx Alezhwghjcjra Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Prodpfezwurajx Alcoa Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Manual

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Flow rate: 32 m³/h Head: 147 m Maximum temperature: 130°C Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Prjdped Sybpjfx Alcja Speed: 2950 rpm ! Price per unit !

Condition: excellent (used), Track width: 25 cm Prjdpfx Aoy S Rpmelcoa Cutting height: 10 cm Engine: 22 kW Ready for immediate use.

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Prsdpexm Sxvofx Alcsa Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 Prodpfx Aloy Tvbkocoa PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: good (used), Year of construction: 2023, Alfa Laval LKH-UP70 Centrifugal pump Pjdpfxju N Hz Se Alcjra Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph

Condition: good (used), Year of construction: 2007, Max. cutting diameter 340mm, max. cutting length 400mm, 66mm Bar capacity, Pedpfxjzg Eayj Alcsra Spindle speed 4000rpm, spindle motor power 22kW, milling speed 4,000rpm, 12 Station Turret, FANUC 32i Control, parts catcher, parts conveyor, swarf conveyor, 3 jaw Chuck, coolant

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) Psdpstmp T Djfx Alcera - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, Pedpsv Tah Asfx Alcsra through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Pedjyhd Imepfx Alcjra Specifications: Power: 11 kW

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. Prodjy Shzajpfx Alcoa We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, Pedpfx Aljwq Iwxjcora 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm Pjdsztau Sspfx Alcera - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: new, functionality: fully functional, Equipment: documentation/manual, | price list | prices | prices | prices | prices | prices | prices | prices | > > > > > ecomas.pl/price-list < < < < < You can view the prices at the very bottom of the listing: Documents / 20215835-01.pdf We offer a high-quality, low-speed pellet granulator. Pjdpsxk Ta Nefx Alcora The pellet mill is 100% manufactured in our plant at ECOMAS Polska Czernikowo. We guarantee equipment designed to operate continuously in a 24/7 system. Our machines produce pellets that meet EU standards – properly compacted, free of harmful additives, with a calorific value of at least 4.6 kWh/kg. The main advantage lies in modern, hardened dies and rollers (60HRC+), manufactured with CNC technology. Our dies ensure high efficiency, low power consumption, and long service life of both dies and rollers. Another benefit is the lubrication of the main shaft with oil and oversized bearings, which significantly slows down wear! Are you struggling with your current granulator – bearing failures, low efficiency, clogged die, high power consumption, rapid wear of parts, etc.? With our machines, these problems disappear. We approach each customer individually! See how our machines produce, type in YouTube: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW up to 55kW. Composition: - complete head with 2/3/4/5 rollers on cylindrical bearings - welded body – fully filled with Orlen Oil Transol VG 320 - cylindrical-bevel gearbox (efficiency 98%) - base frame - bolted dies fi 230, fi 260, fi 285, fi 310, fi 400, fi 520; hole diameters 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - standard oil tank or optional tank with pump and oil installation (oil lubrication, easy oil replacement) - user manual - 12-month warranty The buyer receives a detailed operating manual and a one-year warranty. We provide full warranty and post-warranty service.

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm Prjdpsk D Ez Isfx Alcsa W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)