Used Three-Sided Sanding Line For Beams for sale (37,763)

Condition: used, Year of construction: 2006, functionality: unexamined, SANDING LINE COMPOSED OF 3 MACHINES: LOWER WITH TWO PAD BELTS; UPPER WITH TWO PAD BELTS; LATERAL WITH ONE BELT AND TWO EDGE SANDING BELTS. FOR BEAMS UP TO 800x300 mm. INCLUDING INFEED AND OUTFEED ROLLER CONVEYORS. TOTAL POWER 34 kW. Gkjdpew E Eu Rsfx Al Sjc

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Gsdpfx Aljz Elvvs Sokc Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Gjdpsz Elvpofx Al Sekc Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and surface finishing sanding machine, Heesemann, Type: FGA 6 For intermediate sanding of painted surfaces, wood smoothing, and sanding of foils. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm (constant) Godpfoya I Iusx Al Sekc Workpiece thickness max.: 3-80 mm Conveyor bed with individual conveyor belts Drive: 2.5 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min, adjustable Units: Brush roller unit: Centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Infinitely variable, electronic control of the sanding belt speed via frequency converter Wear-free braking system Pneumatic belt tension Intermittent belt extraction system Belt control: Infrared Sanding belt runs in the opposite direction Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar Distance between guide rollers: 40 mm Pneumatic belt tension The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Workpiece vacuum clamping system: Fan with drive power 5.5 kW Operating side and terminal: left Operating voltage: 400 V; 50 Hz Space requirement: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to changes and errors in technical data as well as prior sale)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Gedpfx Aszvaibol Sskc Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Gjdsz N Ixcjpfx Al Sokc Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, mileage: 553,732 km, power: 353 kW (479.95 HP), first registration: 07/2011, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 13 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 917 mm, Year of construction: 2011, Equipment: ABS, air conditioning, parking heater, 1. Vehicle Base* Wheelbase 1795 mm * Rear frame overhang 800 mm * Engine D2676LF07 ? 480 hp / 353 kW ? EURO 5 SCR ? 2300 Nm * Transmission ZF 16 S 252 OD * Fuel tank 400 l (right side) + 35 l AdBlue * Front axle VOG?09 / VP?09 driven * Front springs Parabolic 9.5 t Gksdpjz Rh Tcefx Al Soc * Rear springs Trapezoidal 16 t * Tandem axle configuration * Instrument panel km/h Base-Line ----2. Cab & Interior* Cab M (2240 mm wide, 1880 mm long) * Seat covers, comfort quality * Driver's comfort seat, air-suspended, air-conditioned, lumbar support, heating * Passenger seat, static, longitudinal and backrest adjustable * Cab mounting, air-suspended * Armrests for driver's seat * Storage compartment + drawer in dashboard * Electric windows * Sun visor, front windshield * Exterior sun visor * Grab handles A- and B-pillar ----3. Climate control, comfort & electronics* Air conditioning AC R134A * Auxiliary heater Eberspächer D4S * MAN Tronic on-board computer * Radio MAN BasicLine 24V * CB radio antenna + car phone antenna * Central locking * 12V & 24V sockets in the cab * Reading lights, driver/passenger * Entry lighting * Headlight beam angle adjustment ----4. Drivetrain & PTOs* Front-wheel drive, switchable * Transfer case G172 * Front axle differential lock + warning buzzer * Rear axle differential lock * Axle ratio i = 4.33 * EDC engine control * PTO NH/1C without flange * Fine dust and pollen filter ----5. Brakes & Safety* MAN BrakeMatic * ABS * Drum brakes front & rear * Brake connection 2-line * Parking brake, pneumatic * Acoustic reversing warning (can be switched off) * Speed limiter 89 km/h * Cruise control * Work lights, roof left * Additional high and low beam headlights * Halogen double headlights H7 * Position and marker lights ----6. Hydraulics & Tipper equipment* MEILLER axial pump 296/54 * Tipper bridge operation in the cab * Controlled tipping lever brake (EVBec) * Hydraulic connection at the rear for 3-way tipper trailer * Mineral oil for tipping hydraulics ----7. Body: MEILLER tipper body D421* Tipper body 6000 × 2380 mm * Bridge floor VS120 ? 7 mm * Side boards M-JET VS100 ? 4 mm * Side boards, 900 mm * Bordmatic left * Rear gate, pivoting with automatic locking * Shear plate 350 mm * Corner posts, fixed * Deflector, front wall 500 mm * Steps, front wall ----8. Chassis, protection & accessories* Underrun protection at the rear, foldable * Steel bumper, three-part * Trailer coupling RINGFEDER 5050 A * Crossmember for trailer coupling * Front mud flaps * Plastic fenders MEILLER * Spray suppression ----9. Electrics & Control* Batteries 2× 175 Ah * Alternator 28V 80A * Trailer sockets 24V 7+7-pole + ABS socket * Display of operating data * Boost pressure indicator ----10. Tires & WheelsFront axles:* 2× 385/65 R22.5 Steering S+G TL 160K * 2× 385/65 R22.5 Steering S+G TL 160K Rear axles:* 4× 315/80 R22.5 HSC1 TL 156/150K * 4× 315/80 R22.5 HSC1 TL 156/150K ----* Technical total weight: * Tare weight: * Permissible trailer load: * Overall length: * Wheelbase: 1795++ mm ----Vehicle number: 11798 &----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We would be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of it. Among other things, we can offer you the following services at an additional cost: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s Gsdpfx Aleyw Ndms Sokc III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: used, Type Production Line Gksdpfxozpbl Ds Al Soc Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, mileage: 368,500 km, power: 375 kW (509.86 HP), first registration: 08/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, * DAF CF 85.510 Tipper + Crane + Radio Gkjdpfx Alezzi Tto Sjc * First registered: 08-2009 * Manual transmission * EURO 5 * Detachable crane * Fassi F 165 XF + Radio * 5 + 6 control circuits for grabber * Carnehl 3-way tipper * On-board computer * Air suspension / Leaf spring suspension * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with a veneer edge sanding side and a solid wood sanding side. 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection is necessary Drive motor 400V / 3kW Front work table for sanding veneer edges with a stop guide rail (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-mounted table, height-adjustable and can be positioned to the side Angle stop Rear, adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the entire sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Feed support holder 68mm Central dust extraction connection 140mm Gkodpfxjz I T Apj Al Soc Very stable chassis, 2 swivel castors, 2 steering castors and a lever brake for locking CE marking All graphite pads and dust extraction hoses have been replaced Original paint, only touched up in some areas Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this provider".

Condition: used, mileage: 519,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Engine D2676LF07, 480 HP, EURO 5 SCR, 2300 Nm * ZF 16 S 252 OD manual transmission * 400 l fuel tank right side + 35 l AdBlue * Front axle VOG?09 / VP?09 driven * Parabolic springs front, 9.5 t * Water cooler & charge air cooler for high temperatures * Trapezoidal rear springs 16 t * Double rear axle installation ----Instruments & Cab* "Base-Line" instrument panel? * Adjustable steering wheel * MAN BrakeMatic * Brake shoe width RA 220 mm * Rear axles AP HPD?1382/1352 * Axle ratio i = 4.33 * Rear differential lock * Front differential lock with warning buzzer * Limited steering capability with FA?lock ----Wheels & Tyres* 11.75-22.5 rims on both front axles * 9.00-22.5 rims on both rear axles * Spare wheel 9.00-22.5 ----Cab & Comfort* Cab M (2240 mm wide, 1880 mm long) * Comfort seat covers * Driver comfort seat, air-suspended, ventilated, heated, with lumbar support * Passenger seat static * Internal-release front flap * Two additional vehicle keys * Washable interior door panels ----Engine & Auxiliary Components* Visco fan * Electronic engine management * PTO parameterization * PTO without flange * Tank guard * Fuel filter + filter heater ----Drive & Transmission* Engageable front-wheel drive Gkedpfxjz Rh Uto Al Sec * Transfer case G172 * Hydraulic/electric cab tilt device ----Heating & Air Conditioning* Eberspächer D4S auxiliary heater * Automatic air conditioning ----Air, Exhaust, Intake* Raised air intake * Fine dust and pollen filter * 1-cylinder air compressor * Raised exhaust right * Tailpipe manifold for raised exhaust ----Brakes & Safety* Engine brake EVBec * Flame start system * Single-plate clutch MFZ 430 * Raised axle vents * Foldable rear underrun guard * No front underrun guard * No side protection device * Three-part steel bumper * RINGFEDER 5050 A trailer coupling * Crossbeam for trailer coupling * Body mounting brackets * Spare wheel holder * Immobilizer * Emergency steering pump * Multifunction steering wheel * ABS * Drum brakes front and rear * 2-line brake coupling * Pneumatic parking brake front ----Access & Lighting* Step to body on fender * Entry lighting * Driver seat armrests * Fly screen * High construction * Air-suspended cab mounts * Note: Reduced comfort due to trapezoidal springs * Lockable tank and AdBlue caps * Headlight range adjustment * Work light left * Additional high beam and fog lights * H7 halogen twin headlights * Position and marker lights * Reading lights * Preparation for cargo area lighting * Central locking * Protective cover for tail light * Electric dual-tone horn ----Electrics & Controls* MAN Tronic on-board computer * Display languages German & English * TollCollect pre-installation * ABS trailer socket * 24V 7+7-pin trailer socket * 12V/24V sockets in cab * 2× 175 Ah batteries * Battery box * Alternator 28V 80A * Operating data display * Reversing alarm switchable * Electronic speed limiter 89 km/h * Cruise control * Boost pressure gauge * Car phone antenna * CB radio antenna * Radio MAN BasicLine * Radio pre-installation * 2 halogen roof beacons * Rotating beacons yellow ----Chassis & Stability* Stabilizer on both rear axles * Front axle stabilizer * Air dryer * Frost protection down to -27 °C ----Interior* Tinted windows * Rear wall of cab without window * Seat belt indicator * Manual sunroof * Electric windows * Sun blind * So

Year of construction: 2003, condition: used, functionality: fully functional, CONTINUOUS HUMP BACK BRAZING LINE FOR STAINLESS STEEL TECHNICAL INFORMATIONS: - Type: Hump Back Mesh Melt Continuous Furnace Line - Process : Brazing (Stainless steel) - Total Length : 28.800mm - Heating Zone : 5200mm - Band width : 650mm - Band speed : Max. 1200mm/min Min : 100mm/min - Capcity : 420kg/h netto - Heating : With Natural gas - Total Heating Power : 400kW Brut Godpfxsx Ux Sbo Al Sjkc - Heating Elements : x10 WS Burners - Controlled zone : 4 - Max Temp. : 1130 C - Athmosphere : Nitrogen / Hydrogen - Control : Demig / Siemens

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Gkedpfsxw Ux Hex Al Sjc Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm Gkodjz Rpkcopfx Al Sec - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) Godpfx Ajwnh Eqjl Sekc 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Gksdpfeuq Sb Ssx Al Sjc

Condition: used, mileage: 47,000 km, power: 206 kW (280.08 HP), first registration: 09/2000, fuel type: diesel, overall weight: 16,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, crane, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Gedpfx Aez H Eltsl Sjkc Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, mileage: 330,000 km, power: 368 kW (500.34 HP), first registration: 06/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, gearing type: automatic, number of seats: 2, Equipment: retarder, trailer coupling, MAN TGS 37.500, 8x4 Engine repair carried out at MAN Automatic transmission Retarder Three-sided tipper Side walls can be folded and swung open Removable asphalt cover 3 sliding panels on the rear wall Trailer hitch Trailer oil line Gjdpjz Azv Nefx Al Sokc Recently serviced New TÜV inspection (German vehicle safety inspection) Excellent condition Errors and omissions excepted!

Condition: used, mileage: 500,000 km, power: 315 kW (428.28 HP), first registration: 06/2001, fuel type: diesel, brakes: retarder, gearing type: mechanical, loading space length: 5,400 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, Mercedes Benz Actros 4143 First registered: 2001 Mileage: 500,000 km V6 engine Retarder (leaf spring / leaf spring) 41-ton chassis Manual transmission – available with German/English/Serbian/Croatian/Bosnian/Bulgarian documentation. Goran German/English/…?/…? – Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: Gkjdezm Egtopfx Al Sec - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 308,000 km, power: 375 kW (509.86 HP), first registration: 07/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Actros 2651 Tipper * Registered: 07-2012 * Drive: 6x4 * EPS with clutch Gsdpfoz Dd U Uex Al Sokc * Retarder * Meiller 3-way tipper * On-board computer * Air conditioning * Tow hitch * Differential lock * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, mileage: 210,000 km, power: 206 kW (280.08 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * MAN TGM 18.280 BB Meiller tipper truck * First registration: 03-2007 Gkedpfxeznr Nqs Al Ssc * Manual transmission * Engine brake * Air conditioning * Leaf spring / Leaf spring * Payload: 7,200 kg * Permissible rear axle load: 10,800 kg * Gross vehicle weight: 18,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, mileage: 193,970 km, power: 175 kW (237.93 HP), first registration: 05/2010, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: orange, gearing type: mechanical, emission class: euro5, total length: 7,180 mm, total width: 2,550 mm, total height: 3,160 mm, Equipment: ABS, crane, * Radio * On-board computer with multi-function steering wheel * 3 seats ----* Work lights * Rotating beacon ----* 8-speed manual transmission * Hill-start assist * Differential lock, rear axle * Pintle hook * Hydraulic connections for trailer operation * Foldable underrun protection at the rear ----* ?MEILLER three-way tipper body Atlas/TEREX 75.2 - A2 loading crane, year of manufacture 2010* ACM system * 2 additional hydraulic outriggers * 2 extensions up to 7.2 m with a lifting capacity of 1000 kg * Max. lifting capacity at 1.9 m = 3750 kg ----* Tire size, front axle: 12R22.5 * Tire size, rear axle: 12R22.5 * Technically permissible total weight: 18,000 kg * Unladen weight: 7,900 kg * Permissible trailer load: 18,000 kg * Overall length: 7180 mm * Next inspection due: 02.2027 Godpfozvk Tqox Al Sekc ----Vehicle number: 12405----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/technical inspection and periodic inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, salvage and vehicle transport----YOUR VTS TEAM

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. Gsdpfxszc Rl Ue Al Sjkc POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Condition: used, mileage: 73,639 km, power: 115 kW (156.36 HP), first registration: 11/2010, fuel type: diesel, overall weight: 9,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro5, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Year of construction: 2010, Equipment: ABS, electronic stability program (ESP), Well-maintained Atego MB 816 three-way tipper truck Special equipment: Trailer brake, 2-line; trailer coupling: towing hitch; trailer coupling: central axle trailer G 250; trailer socket 24V / 15-pin; audio system: CD radio; transmission: 6-speed - type: G 60-6; graphics information display with eco-meter; hydraulic pump (Meiller pump - 5 pistons - 254 / 1); engine start/stop system; spare wheel holder behind the rear axle; rear window; seats in the cab: middle seat with seatbelt; socket in the cab, 24V; crossmember for trailer coupling Additional equipment: Emissions standard EURO 5; axle configuration: 4x2; exterior mirrors, electrically adjustable and heated; battery 115 Ah; cockpit distributor; roof hatch (steel); differential lock, rear axle; cab: S (short); suspension: leaf spring / leaf spring; generator 80 A; urea tank (AdBlue): 25 liters; urea tank (AdBlue): plastic; rear axle H 2, crown wheel 325; interior filter: pollen filter; body/superstructure: tipper; fuel tank: 105 liters; Atego 2 model upgrade; engine 4.3 liters - 115 kW diesel (OM 904 LA); engine brake with constant throttle; auxiliary drive MB 1C; wheelbase 3020 mm; disc brakes; side impact protection; seats in the cab: single passenger seat, fixed; seats in the cab: driver's seat, standard suspension seat; steel rims 6.75x17.5; underrun protection, fixed, rear; underrun protection, front; immobilizer; permitted total weight 9.50 t Tire condition, front axle approx.: 60%; rear axle approx.: 50% Errors and prior sale excepted! Gksdpozu H Emefx Al Ssc