Used Turbo Dry Vacuum Pump for sale (13,329)

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Fpedpfxeikq Tyo Al Sjn Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Fpjdoz Ikx Uepfx Al Ssn Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Condition: used, functionality: unexamined, overall weight: 120 kg, input voltage: 220 V, Used Shimadzu XH3306LMC Turbo Molecular Pump Manufacturer: Shimadzu Corporation Model: TMP-XH3306LMC | EI-XH3306M (controller) Fpedpfxjz Ipdpo Al Sen Voltage: ~200-240 (50/60Hz) Weight: ~120 kg (total)

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, The Pfeiffer OnTool DryPump PDP100, with serial number 53005526 is an oil-free, multi-stage dry vacuum pump manufactured in November 2014. Manufacturer: Pfeiffer Vacuum Type: OnTool DryPump Serial Number: 53005526 Year of Construction: 11/2014 Electrical Requirements: 230 V, 3 Phase, 50/60 Hz Weight: 121 kg (approx. 267 lbs) Operation: Oil-free dry compression, commonly water-cooled for stable temperature control in industrial or semiconductor environments. Multi-stage roots vacuum pumps from Pfeiffer Vacuum+Fab Solutions operate with precisely engineered lobes that do not come into contact with each other or the housing. This design eliminates the need for lubricants in the compression chamber, ensuring dry and oil-free vacuum generation, which makes multi-stage roots vacuum pumps the perfect choice for a wide range of applications requiring clean vacuum such as semiconductor manufacturing, vacuum coating or chemical and pharmaceutical processes. Price 5.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Fpjdpfoz E Sgnox Al Son Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila.

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 Fpsdsznpagspfx Al Sen ID no 12320594/1 Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Fodpfsxlikmex Al Sspn Ultimate Pressure: 0.2 Pa Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Condition: used, functionality: unexamined, machine/vehicle number: STP-A3003C1-U, overall weight: 71 kg, rotational speed (max.): 27,000 rpm, Used BOC Edwards STP-A3003C1-U Turbo Vacuum Pump Manufacturer: BOC Edwards Technologies Ltd. Model: STP-A3003C1-U Max 27000RPM Fpjdpfx Alewnbwgs Son For sale per unit.

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC dry vacuum pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform, high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features: The LR series pump is designed for load lock chambers and PVD processes. ULVAC's unique aluminum design enables very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Sealed motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when exposed to corrosive gases. Fsdozdqtgepfx Al Sepn (LR series) Designed for process gases that generate powdery byproducts, such as Si crystal growth furnaces. Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Fpodpfxeftzhne Al Ssn Nominal flow: 140 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Fpodpfx Aloftzvij Son Final vacuum: 200 mbar Any clarification, do not hesitate to contact us.

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Fodpozz Tm Rjfx Al Sopn Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Fpsdpfxsftzkqj Al Sen Nominal flow: 80 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Fpjdpfxotu H Eis Al Sen Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Fjdpov I Agdefx Al Sspn Accessories: Intake filter; Operating instructions Delivery time: Short term

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) Fodpszixyfjfx Al Sjpn (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Fedez Da Nhepfx Al Sopn

Condition: good (used), Year of construction: 2021, Becker VTLF2.500/0-79 Vacuum pump 2021, speed 950 min -1, Power 11Kw, Inlet capacity 490 m3/h, Max vacuum 250 mbar, 3Ph Fjdpoz E S Daofx Al Sepn

Condition: used, This listing is for Pfeiffer MVP020 Vacuum Pump (MVP020) The unit is in full working condition and ready for immediate use Compact, oil-free diaphragm vacuum pump designed for clean and quiet operation. Ideal for laboratory processes requiring consistent vacuum such as filtration, drying, and rotary evaporation support. Robust build ensures long-term reliability with minimal maintenance. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Fjdpfxsy Ehpqs Al Sspn • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Busch Vacuum Pump Model 630 Fpodpfxewa Nzqj Al Sjn 370 CFM

Condition: good (used), Busch Vacuum Pump Model 400 Fedowa Ra Uepfx Al Sspn

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Fodpfjwa Ucgjx Al Sspn Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Model 400-212 Fedpfxswa Unpj Al Sjpn

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Fedpfx Alsitywro Sepn Model: PD2052-AC2 Type: PR1800 + PD500 Condition: Used

Condition: used, This listing is for a Thomas 7100561 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Thomas 7100561 Piston Vacuum Pump is a top-tier dry-running WOB-L® piston pump, meticulously engineered for high-pressure applications. Its design prioritises low vibration and balanced flow, ensuring smooth operation while maintaining low power consumption, making it an excellent choice for energy-efficient workflows. Key Benefits: - Precision Performance: Known for its reliability, this pump is ideal for demanding environments, catering to industries such as medical, laboratory, and environmental applications. - Impressive Flow Rate: Achieves a maximum free flow rate of 212 l/min (7.5 cfm), allowing for efficient handling of various tasks. - High Pressure Capabilities: Supports a maximum continuous pressure of 12.1 bar (175 psi), making it suitable for tasks requiring substantial pressure levels. - Strong Vacuum Performance: Provides a maximum continuous vacuum of -990 mbar (29.2 ), ensuring effective suction for a variety of applications. Specifications: - Type: Dry-running WOB-L® piston pump - Applications: Medical, laboratory, environmental Fpjdpsxxyhvofx Al Sjn - Maximum Free Flow Rate: 212 l/min (7.5 cfm) - Maximum Continuous Pressure: 12.1 bar (175 psi) - Maximum Continuous Vacuum: -990 mbar (29.2 )

Condition: used, This listing is for a Biotek Instruments Vacuum pump 2 The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Fpsdpfjxwc I Nex Al Sen Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability eBay: This vacuum pump is listed on eBay with free shipping for many products. Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.