Used Ukb Press Brake Ukb - Type 1 Radius for sale (100,565)

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Kledpfx Amox Sxuke Eor Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Kedpjd R Dhpjfx Am Eelr Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, Series: GB-E Kjdpfx Aowzqn Usm Eslr Bending pressure: 130KN Bending length: 600(mm)

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order Klodpfxovd Aavj Am Eer SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: new, 88 degree press brake punch of amada/promecam style R0.8mm, H120mm, L835mm, L835mm segmented Klsdpfxjin I D Ee Am Ejr

Condition: new, Amada/promecam style Centrical 1V press brake dies Ksdpfxjin I Hro Am Eelr

Condition: new, V100mm Press brake dies of Amada/Promecam style Kodpfswcx Ncsx Am Ejlr

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Klsdpfxov Hchlo Am Esr Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 83966, functionality: fully functional, pressing force: 150 t, TECHNICAL DETAILS Pressing force: 150 t MACHINE DETAILS Machine weight: 9,500 kg EQUIPMENT Fastbend 2D control on Y1, Y2 and X axes Euro tool clamping A complete set of tools Ksdpoyykvpsfx Am Eslr

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6430025, functionality: fully functional, stroke length: 215 mm, overall weight: 10,000 kg, controller model: Cybelec ModEva 12 CNC, bending force (max.): 150 t, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Bending force: 150 t Maximum stroke: 215 mm Descent speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Kodpfx Ajyyb D Rom Eelr Control: Cybelec ModEva 12 CNC CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Weight: 10,000 kg Main motor power: 11 kW Total connected load: 15 kW Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Nominal pre-fuse current: 35 A Hydraulic operating pressure: max. 300 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 9 mm EQUIPMENT Hydraulic upper clamp: RFA Hydraulic lower clamp: WILA 13 mm Complete tool set (model: P5)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 25084, functionality: fully functional, stroke length: 400 mm, controller model: Cybelec DNC 800 CNC, bending force (max.): 250 t, working length: 6,100 mm, TECHNICAL DETAILS Press force: 250 t Working length: 6,100 mm Stroke: 400 mm MACHINE DETAILS Control system: Cybelec DNC 800 CNC Number of axes: 4 (Y1, Y2, X and R) Connection: 400 V Pressure: 290 bar Noise level: 65 dB(A) Weight: 24.5 t Kledpfx Asyybzism Eer EQUIPMENT Hydraulic CNC crowning for precise bending results Complete tool set

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 6440022, functionality: fully functional, stroke length: 415 mm, overall weight: 17,600 kg, controller model: Cybelec ModEva12 CNC, bending force (max.): 200 t, working length: 4,100 mm, TECHNICAL DETAILS Bending force: 200 t Working length: 4,100 mm Stroke: 415 mm Rapid traverse down: 190 mm/s Working speed: 10 mm/s Rapid traverse up: 150 mm/s MACHINE DETAILS Control system: Cybelec ModEva12 CNC Axes: Y1, Y2, X, R, Z1, Z2 Weight: 17,600 kg Main motor power: 18.5 kW Total connected load: 22 kW Operating voltage: 400 V Frequency: 50 Hz Klsdpfx Aoyybw Rem Eor Control voltage: 24 V Pre-fuse rated current: 50 A Hydraulic operating pressure: max. 310 bar Pneumatic operating pressure: max. 8 bar Overrun distance: 8 mm EQUIPMENT Hydraulic RFA upper clamping Hydraulic WILA NS lower clamping Hydraulic CNC crowning Complete tooling set (model: P5)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7376230761, functionality: fully functional, operating hours: 305 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Kjdpoy Avu Asfx Am Ejlr Press force: 400 t Max. working width: 4,050 mm Upright distance: 3,400 mm Throat depth: 630 mm Max. stroke: 365 mm MACHINE DETAILS Control system: Durma DT-15 Number of axes: 4 (Y1+Y2+X+R) Crowning system: CNC-controlled Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Transport weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h Hydraulic motor hours: 305 h EQUIPMENT Tools Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressing force: 150 t, stroke length: 415 mm, throat depth: 400 mm, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled, the cylinders removed and serviced, and seals, oil, and filters replaced. New light barriers have been installed, the CNC control has been checked, and the machine has been newly painted. TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Control unit: CYBELEC DNC 900 Motor power: 15 kW Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Kjdoy D Ih Repfx Am Eelr Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning External reference: 17U5683

Condition: used, Year of construction: 2002, functionality: unexamined, Edwards Pearson PR6 250/4100 press brake (2002) Klsdpfxjy Duvus Am Eor

Condition: used, functionality: unexamined, Year of construction: 2005, Edward Pearson / Bystronic PR 100x3100 press brake (2005) Kledpfey Duvhex Am Eer

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Kedpfx Ajy D Smwom Ejlr Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Klsdpfxoy D Rhys Am Ejr

Condition: used, Year of construction: 2022, Bystronic Xpress 80/2100 Hydraulic Press Brake. S/No. Xpress 22334EU (10/2022), Max Press Force 800KN, Max Working Length 2100mm, Max Stroke 200mm, Machine Weight 6000kg Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Kodey D Rbajpfx Am Eolr

Condition: used, Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake. S/No. XACT 22040SE (02/2022), Max Press Force 1600KN, Max Working Length 3100mm, Max Stroke 200mm, Rapid Approach, 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 10,500kg Klsdpfx Amsy D N R Hs Esr Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Bystronic Xact Smart 225/4100 Hydraulic Press Brake. S/No. XACT21278SE (08/2021), Max Press Force 2250KN, Max Working Length 4100mm, Max Stroke 200mm, Rapid Approach 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 15,000kg Klsdpfx Amoy D N Raj Esr Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Kljdpfx Aoy Dpufsm Esr Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm Kledpou A Dgrofx Am Eor can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2003, Haco 6m x 225ton CNC Pressbrake Great working condition 6m capacity x 225ton Kljdoyv Dc Ispfx Am Ejr 2 Axis Year 2003 Light Guards

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW Ksdpfx Asyzy D Eom Ejlr