Used Venieri 4.63H 35Km/H for sale (55,967)

Condition: used, Used Eiger model 5L SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm x 200mm diameter. Unit is driven by 10hp, 420volt, 3/50 electric motor. Includes local controls. Kodpez Ah Skefx Ab Nonc

Year of construction: 2023, condition: like new (used), Double sided with 6000mm capacity on either side Total of 12000mm total working/ storage capacity for elements 3m height capacity Complete with 2 special fixing arms for one element 4 off additional supports Kodpfx Absymnh Ue Njnc Year - 2023 CE Condition - Never been installed. Condition almost as new

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Kodpfx Aszgq Szjb Nsnc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, G&G PE/PP Pipe Die Head PO 125/600 Type: PO 250/600 spiral mandrel distributor Year of manufacture: 2015 Application: Two-layer pipes + color stripes for PE and PP pipes Max. diameter: 125 mm Min. diameter: 20 mm Maximum throughput: 600 kg/h Lightly used Knsdj Admdfepfx Ab Nsc Condition: Very good The pipe die head is my property. Standard: Sachal Extrusionsmaschinen Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, TECHNICAL DETAILS General Information Machine type: Internal combustion engine forklift Manufacturer: Linde Model: H 30 T-02 Year of manufacture: 2015 Operating hours: 11,043 h Condition: ready to operate Self-weight: 4,955 kg Mast Mast type: Triplex (3F645) Load capacity: 3,000 kg Lifting height: 6,450 mm Free lift: 1,800 mm Overall height: 2,600 mm Forks and fork carriage Fork length: 1,200 mm Fork carriage: FEM 3A Drive and engine Drive: 4-cylinder internal combustion engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: VW Tires Tire type: Superelastic Front tire size: 27 × 10–12 Front tire tread: 20 % Rear tire size: 23 × 9–10 Rear tire tread: 60 % Dimensions Knjdpfez Scqyex Ab Noc Overall length: 2,850 mm Overall width: 1,250 mm Overall height: 2,600 mm Sales Information Minimum price: none Sale: guaranteed to the highest bidder EQUIPMENT 3rd valve 4th valve Work lights, front Work lights, rear Heater Full cabin Double pallet clamp Side shifter Double pallet clamp

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Sale only to traders and under exclusion of any warranty . Kodpfxeq T Iuye Ab Nsnc We deliver to any GERMAN seaport .

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Kedoz Rmk Topfx Ab Njnc Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 Kodsz Il Hyspfx Ab Njnc External Reference: Steinbach & Holler - Lot 39

Condition: used, machine/vehicle number: H2X391X00341, Year of construction: 2020, operating hours: 15,584 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,625 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Drive type: Liquefied petroleum gas (LPG) Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,150 x 2,121 mm Weight: 3,391 kg UVV certificate valid until: 06/2027 Next service due in: 416 hours Operating hours: 15,584 hours EQUIPMENT Former Linde full-service unit Full cabin Heater Windshield wiper Knjdpfx Absz Nxg Dj Njc Tilt angle indicator Fork positioner Side shifter LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas cylinder Hydraulically adjustable forks Side shifter Hydraulic valves: 3rd + 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 182

Condition: used, functionality: fully functional,

Condition: used, Used APV Rannie Blue Top 30/60 Homogenizer – Stainless Steel – 2-Stage High-quality APV Rannie “Blue Top” homogenizer, model 30/60, designed for reliable and efficient homogenization in dairy and food processing applications. This unit features a 2-stage homogenizing system, ensuring optimal particle size reduction and stable product consistency. The robust stainless steel construction makes it ideal for hygienic production environments. Technical details: Manufacturer: APV Rannie Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Performance: Estimated capacity: approx. 1,500 – 2,000 L/h Working pressure: up to approx. 150–250 bar Knjdpfxoz Szaxs Ab Njc (depending on product and operating conditions) Model: Blue Top 30/60 Configuration: 2-stage homogenizing valve Motor power: 15 / 18 kW Plunger diameter: 30 mm Connections: approx. 1" – 1.5" Material: Stainless steel Manufacturer: APV Rannie

Condition: excellent (used), Equipment: foot remote control,

Condition: used, machine/vehicle number: PKY391L00221, Year of construction: 2022, operating hours: 15,536 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,150 mm MACHINE DETAILS Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,196 mm Self-weight: 3,290 kg Next service due in: 464 hours UVV certificate valid until: 06/2027 Tires replaced: 06/2026 Operating hours: 15,536 hours EQUIPMENT Facelift model with tilt angle indicator Clear-view mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Seat heating LPG gas tank All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Knodpfjz Nxf Tsx Ab Njc Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is carried out at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 181

Condition: excellent (used), Technical specifications: Year of manufacture: 2024 Engine type: Diesel Location: Bro, Stockholm County, Sweden Knsdpfxoz Rp Tqj Ab Nec

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a compact, high-performance heavy-duty racking system for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 6,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. Kedpfez Uukiox Ab Nenc The offered pallet racking system has a total of 432 pallet spaces, including ground-level spaces. At a total price of €9,870.00 net, this corresponds to a price of only €22.85 net per pallet space. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Shelf load: 2,000 kg per level - Bay load: 6,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 520 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground level + 3 beam levels - Pallet spaces: 432, including ground-level spaces - Price per pallet space: €22.85 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 520 × 110 cm, pre-assembled - 162 × Beams, approx. 360 × 12 × 5 cm - 324 × Safety pins PRICE: €9,870.00 net €11,745.30 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optional - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, shelving systems, and other solutions on-site. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many more offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Kodpfxsz Nvqme Ab Nenc Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a powerful heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system offered has a total of 408 pallet spaces, including spaces on the floor level. At a total price of €9,550.00 net, this corresponds to a price of only €23.41 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 63.00 m - Shelf load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: floor + 5 beam levels - Pallet spaces: 408, including floor spaces - Price per pallet space: €23.41 net - Condition: Used, Jungheinrich MPB DELIVERY SCOPE: - 18 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 170 × Beams, approx. 360 × 12 × 5 cm - 340 × Locking pins PRICE: €9,550.00 net €11,364.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: Ksdpfx Abez Uu Iuj Nonc - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams can be arranged - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether for new construction, renovation, or expansion – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive picture of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You can find our telephone number on our company website. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Knedo Adt Hmopfx Ab Nec

Condition: used, machine/vehicle number: H2X393V04197, Year of construction: 2019, operating hours: 24,689 h, load capacity: 3,000 kg, lifting height: 3,615 mm, mast type: duplex, fork length: 1,350 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm Telescopic forks: up to 2,350 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: LPG Fuel system: LPG gas tank Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,250 x 2,441 mm Weight: 4,680 kg Next service due in: 311 hours UVV certification valid until: 07/2027 Operating hours: 24,689 hours EQUIPMENT Former Linde full-service unit Tilt angle indicator Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Safety light (front) Safety light (rear) Safety light (side) Rear-view camera Comfort seat Lumbar support Seat heating Functional and condition video available Hydraulics: 3rd and 4th hydraulic valve Side shifter Integrated scale Kedpfxjz Npl Dj Ab Nenc All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 96

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking system for industrial storage requirements. This modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 37.00 m - Level load capacity: 2,000 kg per level - Bay load capacity: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue painted - Levels: ground + 5 beam levels - Pallet spaces: 240 including ground spaces - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 11 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 100 × Beams, approx. 360 × 12 × 5 cm - 200 × Locking pins PRICE: €5,700.00 net €6,783.00 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will be happy to create a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! You can get a comprehensive overview of our pallet racking, storage racking, and other solutions on site. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! HAVEN'T FOUND WHAT YOU'RE LOOKING FOR YET? Visit our website. Here you will find a quick overview of many other offers and models. Knodpfx Abjz Uuz Uo Nec ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or call. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Knedpfxsl Hx Rpo Ab Nec

Year of construction: 2000, condition: good (used), Pallet wrapper, stretch wrapping machine for pallets, Strema, H 1300 – used: Price ex works: €1,950 (net), including loading! Kodpfx Aez Sd A Rsb Njnc Manufacturer: Strema Type: H 1300 Year of manufacture: 2000 Machine number: 23123 Rotating table diameter: approx. 1.60 m The machine is embedded in the floor of the hall, therefore no ramp or similar is required. Column height: approx. 2.70 m 3 x 400 VAC, 50 Hz, 16 A Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Ksdpjvthdfefx Ab Nonc

Condition: used, functionality: fully functional, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty storage solution for industrial warehousing needs. The modular high-bay racking is ideally suited for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 18.50 m - Load capacity per level: 2,000 kg - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: ground + 5 beam levels - Pallet spaces: 120 including ground spaces - Condition: used, Jungheinrich MPB SCOPE OF DELIVERY: - 6 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 50 × Beams, approx. 360 × 12 × 5 cm - 100 × Locking pins PRICE: €2,950.00 net €3,510.50 gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional installation and dismantling by trained teams optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will gladly create a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice regarding your racking configuration. SHOWROOM: Feel free to visit us in our showroom! Here, you can get a comprehensive overview of our pallet racking, shelving systems, and other solutions. Many systems are set up and can be experienced directly. Our expert consultants are available to answer your questions and provide individual advice – we look forward to your visit! Kjdpfjz Uuq Aex Ab Njnc HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: used, machine/vehicle number: H2X393V04185, Year of construction: 2019, operating hours: 14,576 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm MACHINE DETAILS Mast type: Duplex mast Lift type: Full free lift Drive type: LPG Kodpfjz Nxd Nox Ab Nsnc Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,665 kg UVV certificate valid until: 09/2027 Next service due in: 423 hours Operating hours: 14,576 hours EQUIPMENT Former Linde full-service unit 3rd hydraulic valve 4th hydraulic valve Side shifter Hydraulic telescopic forks Integrated scale Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Safety light, front Safety light, rear Safety light, side Rear view camera Comfort seat Lumbar support Seat heating LPG gas tank Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 171