Used Ventherm Paint-/ Driyingbox Combined for sale (8,181)

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Nsdpfxjhzbq Te Abuelh Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Nljdpfxo Afpiys Abujh

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Nodpfxoy Iamto Abuolh

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Nledpfx Aoygu Smobujh Width:6000mm Height:6000mm

Condition: new, functionality: fully functional, total height: 74 mm, total length: 63 mm, total width: 51 mm, overall weight: 43 kg, Husky 1590 SS Air-Operated Double Diaphragm Metal Pump, SS/PT Product number DB4311 - 199 The Stainless Steel + PTFE combination offers universal chemical compatibility and allows working with low to medium/high viscosity products: Solvents and Alcohols: Acetone, MEK, toluene, xylene, ethanol, methanol, isopropyl alcohol. Acids and Bases: Nitric acid, phosphoric acid, diluted sulfuric acid, caustic soda, alkaline solutions. Resins and Adhesives: Epoxy resins, polyurethanes, solvent-based or water-based adhesives. Inks and Paints: Industrial paints, enamels, lacquers, flexographic and gravure inks. Sanitary/CIP Chemicals: Concentrated detergents, industrial disinfectants, deionized water. - Chemical and Petrochemical Industry: Processing and transfer of reagents, solvents, acids, and alkalis in the plant. - Pharmaceutical and Cosmeceutical: Loading, mixing, and dispensing of raw materials and finished products. - Food and Beverage (auxiliary processes): Transfer of concentrates, flavorings, additives, and CIP (Clean-in-Place) cleaning that require aggressive chemicals. - Paints, Inks, and Coatings: Handling of resins, cleaning solvents, printing inks, and corrosive enamels. - Water and Industrial Treatment: Dispensing of flocculants, chemical neutralizers, and aggressive waste fluids. Features - Diaphragm life up to 5 times longer compared to other pneumatic diaphragm pumps in its class. - Wide range of materials to suit a multitude of applications. - Fewer parts than the competition; the pneumatic valve is accessible from the outside, allowing for quick and easy maintenance without disassembling the diaphragm pump. - Available in ATEX configuration. - 1-1/2 inch (38.1 mm) ANSI end connections. - High flow rate: 100 gpm (378 lpm) in a compact and portable size. - Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa). - Lubrication-free operation. - Available in polypropylene, aluminum, and stainless steel. - Pneumatic section with epoxy coating for harsh environmental conditions. Technical Specifications Air inlet diameter (inches) 1/2 Fluid outlet thread type: Female Fluid outlet diameter (mm) 38.1 Nsdpfx Aboz Snr Usujlh Maximum air consumption (SCFM) 125 Maximum air pressure (bar) 8.27 Fluid inlet thread type Female Fluid inlet diameter (mm) 38.1 Maximum flow rate (L/min) 379 Maximum fluid pressure (bar) 8.27 Fluid inlet size (in.) 37257 Maximum operating temperature (°C) 66 Maximum operating temperature (°F) 150 Maximum solid particle size (cm) 0.4763 Maximum solid particle size (in.) 0.1875 Maximum solid particle size (mm) 4763 Husky Model diaphragm_compatible_material PTFE Air inlet thread type Female Maximum air pressure (psi) 120 Maximum cycle frequency (CPM) 200 Maximum fluid pressure (psi) 120 VAT NOT INCLUDED

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 33 m³, loading space width: 2,352 mm, loading space length: 5,898 mm, loading space height: 2,393 mm, Dear Sir or Madam, We are offering a combination of a 20" shipping container and a matching roll-off frame for sale. The frames have the following features: Nedpezz Sh Tofx Abujlh - Manufactured according to DIN 30722-1 - Lifting bracket, 50mm diameter - Hook height 1570mm - Superstructure usable length approx. 6,050mm - Sheets and profiles continuously welded - External rollers are lubricatable and replaceable - Total weight 15,000kg - Tare weight approx. 800kg - Payload approx. 14,200kg - Painted in RAL 7016 - 4x twistlock fastenings for transporting 20" shipping containers - Incl. type plate and container inspection according to DGUV Rule 114-010 (formerly BGR 186) - 1x 20" shipping container TEU-1 (as new) - External dimensions 6,058 x 2,438 x 2,591 - Incl. lockbox - Air vents all around - 33m3 volume - Wooden floor - Total price: €5,100.00 plus VAT. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time.

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Nledszw Hzaepfx Abuoh Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity.

Condition: new, Year of construction: 2026, functionality: fully functional, The DMS 600/4S is an automatic painting machine manufactured by our company, designed for painting or staining furniture components, stairs, moldings, and panels with a maximum height of 80 mm. Easy and straightforward operation, combined with the latest technology, guarantee the highest quality of painting. The compact dimensions of the machine allow it to be used in smaller spaces. The machine is controlled via a 19" touchscreen based on intuitively designed software. The machine is designed so that all maintenance operations, such as filter replacement, cleaning, and changing paints or stains, can be performed in an optimal manner. Nlsdpfx Ao Aa Iwrsbueh The DMS 600/4S is manufactured according to well-known and proven principles: the system is designed as an enclosed booth with the option of connecting an air extraction system and a particulate filter. The machine is equipped with a conveyor belt, which, depending on the model, can be protected with foil/paper or equipped with a scraping and cleaning system for the main belt. Both systems are designed for paint recovery. The painting zone includes a movable arm that can accommodate up to 4 spray guns. The spray guns are mounted on adjustable brackets (the spray guns are suspended so that the height can be adjusted by +/- 100 mm). At the inlet, the machine is equipped with an EX sensor bar for detecting objects. The object detection scanner works by transmitting the outline of the object to the controller, which then appropriately controls the operation of the spray guns, applying paint only to the object's surface. The machine is prepared for the installation of low- or high-pressure painting equipment. Key information: - Working width 600 mm, - Movable carriage with spray guns - Paint recovery system for reuse - Belt cleaning system - Small machine adapted to customer needs

Condition: used, machine/vehicle number: 008157, Position 1: Brushing Machines GIARDINA-1VE - 300 Njdpfx Abow Sdu Usujlh Position 2: Sprayers GIARDINA-1VE - 300 Position 3: Panel Feeding and Loading GIARDINA-1VE - 300

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Nlodpfx Aoz D Ihfsbuoh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. Nlsdpoz Nxk Nefx Abueh The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive

Condition: good (used), functionality: fully functional, planing width: 630 mm, number of blades: 4, actuation type: manual, total length of planing tables: 2,100 mm, total width: 630 mm, overall weight: 950 kg, Jointer planer KÖLLE, table width 630mm, max. planing height 250mm. Nsdpfsz Tfc Hsx Abujlh

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Nedpfj Afwxlox Abuslh Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: Nsdps Aa Rh Tefx Abuelh 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Nledpfox Iggyox Abuoh Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 Nljdpfx Ajz Hngmobush • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Nsdpfxs Aazwxe Abujlh Features tracking, automatic color change, and intelligent control of paint and spray pattern. Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Surface table length: 1,700 mm Nsdpfxoz Uxmze Abuslh Weight: approx. 300 kg Includes infeed/outfeed roller table.

Condition: good (used), functionality: fully functional, For sale is a used FELDER BU 8 FK 31 combination machine in a robust design. The machine combines several machining functions and is suitable for use in carpentry and woodworking shops. Technical data according to the manufacturer: Jointer and thicknesser: Jointer width: 310 mm Stock removal during jointing: 0–4 mm Adjustable fence: 90–45° Cutterhead diameter: 100 mm Number of cutters: 2 in standard configuration Cutterhead speed: 4,800 / 3,400 rpm Nljdpfo Aaypgjx Abueh Thicknesser width: 310 mm Thicknesser height: 3–190 mm Max. stock removal during thicknessing: 5 mm Automatic feed rate: 9 m/min Circular saw: Saw arbor: Ø 30 mm Saw blade diameter: 150–300 mm Maximum cutting height: 100 mm Maximum cutting height adjustment: 105 mm Cutting width with fence: max. 720 mm Saw arbor speeds: 4,300 / 3,400 rpm Circular saw table: 357 × 800 mm Circular saw table height with table extension: 1,800 mm Spindle molder: Spindle diameter: 30 mm Spindle speeds: 4,300 / 6,000 rpm Spindle height: 130 mm Table clamping with 3 rings: max. 170 mm Two-jaw drill chuck clamping range: 0–16 mm Mortising attachment: Height adjustment of the drill support: 110 mm Drilling depth with fence: max. 150 mm Drilling length with fence: max. 220 mm Sliding table: Universal sliding table with 90° stop and cross stop 12-point ball bearing Cutting length on extension: 745 mm Cutting length on stop: 1,000 mm Special cutting length with additional table: 1,110 mm Other technical data: Motor power according to data sheet: 2.2 kW / 3 HP Power supply: 380 V / 50 Hz Machine height: 820 mm Machine weight: approx. 595 kg Transport dimensions according to manufacturer: 1,330 × 980 × 1,030 mm Equipment according to photos: Circular saw with sliding table Parallel fence with scale Cross stop Spindle molder with fence and safety device Jointer and thicknesser unit Mortising attachment Various handwheels for adjustment Including profile cutterhead with profile cutters Other accessories and milling tools according to photos The machine can be inspected and tested after prior arrangement. Transportation possible for an additional charge! Note: The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), NEDERLANDS Gebruikte SCHIELE Trockenkabine 80mm MW – Doorloopdroogcabine met elektrische uitrusting en schakelkast Wij bieden deze gebruikte SCHIELE-doorloopdroogcabine aan, inclusief elektrische uitrusting en schakelkast. Fabrikant: SCHIELE Model: Trockenkabine 80mm MW Bouwjaar: 2012 Ordernummer: 21204763 Beschrijving - 2 identieke compartimenten - Afmetingen per compartiment: 8 m breed × 16 m lang - Elk compartiment beschikt over een eigen verwarmingssysteem, circulatieventilatoren en gasbrander. Technische specificaties per compartiment Verwarming - Verwarmingsmedium: aardgas H - Verwarmingsvermogen: 120 kW - Maximale droogtemperatuur: 58 °C - Maximale temperatuur verwarmingsoppervlakken: 58 °C Luchtstromen - Circulatielucht: 2 × 22.500 m³/h (totaal 45.000 m³/h) - Regelbare toevoer verse lucht: 900–3.600 m³/h - Minimale afvoerluchtstroom bij 20 °C: 900 m³/h Ventilatoren en motoren - Circulatieventilatoren: 2 × 7,5 kW (totaal 15 kW) - Toerental: 1.450 rpm - Afvoerventilator: 1,5 kW - Toerental: 1.450 rpm Maximale oplosmiddeldoorvoer - 7.600 g/h (7,6 kg/h) Gasbranders – Weishaupt WG10N/1-D ZM-LN Elk compartiment heeft één gasbrander. De eerste foto toont het typeplaatje. - Vermogen: 25–110 kW - Regeling: modulerend / tweetraps - Brandstof: aardgas; LPG-geschiktheid afhankelijk van de configuratie - NOx-klasse: klasse 3 - Voeding: 230 V, 50 Hz - Gewicht: ca. 14 kg per brander Voor meer informatie kunt u ons een bericht sturen of telefonisch contact opnemen. ENGLISH Used SCHIELE Trockenkabine 80mm MW – Continuous-flow drying unit with electrical equipment and control cabinet We offer this used SCHIELE continuous-flow drying unit, complete with electrical equipment and control cabinet. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of construction: 2012 Order number: 21204763 Description - 2 identical chambers - Dimensions per chamber: 8 m wide x 16 m long - Each chamber has its own heating system, circulation fans, and gas burner. Technical specifications per chamber Heating - Heating medium: H-grade natural gas - Heating capacity: 120 kW - Maximum drying temperature: 58 °C - Maximum temperature of heating surfaces: 58 °C Airflows - Circulation air: 2 x 22,500 m³/h (total 45,000 m³/h) - Adjustable fresh air supply: 900–3,600 m³/h - Minimum exhaust airflow at 20 °C: 900 m³/h Fans and motors - Circulation fans: 2 x 7.5 kW (total 15 kW) - Speed: 1,450 rpm - Exhaust fan: 1.5 kW - Speed: 1,450 rpm Maximum solvent flow rate - 7,600 g/h (7.6 kg/h) Nlsdpfx Ao Aax Ibsbuoh Gas burners – Weishaupt WG10N/1-D ZM-LN Each chamber has one gas burner. The first photo shows the burner's nameplate. - Capacity: 25–110 kW - Control: Modulating / two-stage - Fuel: Natural gas; LPG compatibility depends on the configuration - NOx class: Class 3 - Power supply: 230 V, 50 Hz - Weight: Approx. 14 kg per burner For more information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Njdpfxjrvi Rio Abuslh

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Nsdpfjz Iqqksx Abuslh Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley Njdj Adr Hxjpfx Abuslh - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee. Njdsz D Ifqopfx Abuolh

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1200 mm Nledpfx Absz Symkoueh - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC