Used Vmb Kenametal Vmb Kenametal Ecm for sale (67)

Condition: used, functionality: fully functional, ECM deburring machine VMB brand, formerly Kenametal Currently not installed, but I will handle its relocation to the warehouse 2 units available Lasdpfx Aszd Dwreifsd

Condition: not inspected (used), Manufacturer: Stork Lodpfsm Uc R Uex Aifoad Capacity: 660 m3/h Engine: 160 kW

Year of construction: 1998, operating hours: 5,400 h, condition: good (used), functionality: fully functional, Sawblade –Ø: 500 - 1000 mm Cutting lenghts for saw blade – Ø 500 mm = 3400 mm Saw motor output: 18,5 KW 400 Volt, 50 Hz. Standard rot. speed: 1.000 / 1.450 U/min. Support: electrical vertical adjustment of saw blade; stroke ca. 550 mm Support: electrically swivelling from 0°- 48°. Control: Electronic sequence - cutting control Automatic program: for soft and hard stones Operator panel : swiveling Folding bellows cover Bridge and cross guides Machine rotary table Size: 3400 x 1500 x 800 mm Ledjym Nzpspfx Aifsad Table can be rotated manually through 360°, with fixed locking at 90° intervals, or individually in any position. Side stops can be folded down manually

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Lsdpfx Aijh Tfqhofead • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, functionality: unexamined, Equipment: documentation/manual, ECM deburring machine including a double-chamber filter press and separate cooler. Available on short notice without warranty. Collection and transport must be arranged independently. Lasdpjy U Dyqofx Aifjd

Condition: repair required (used), Cutting capacity round Ø 300 mm Lajdswqcahspfx Aifed Cutting capacity rectangular 305 x 305 mm Saw blade speed approx. 25-108 m/min Saw blade drive 4 kW Incl. hydraulic saw blade tensioning Incl. coolant system Incl. various replacement bands

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 60180, Republic Lagun VBM vertical spindle surface grinding machine 1000-F Laedpfx Aioy Ey Dtefed

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Lodpfx Aiexx Nkyjfsad Machine status: WORKING # Safety light barrier – needs replacement

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 5780515, functionality: fully functional, Metora VMB280 hacksaw with automatic feed • Cutting capacity: up to 280 mm • Cutting angle: 90° and adjustable up to 45° • Automatic feed: adjustable, hydraulic feed for consistent cutting quality • Motor power: 1.5 kW • Cutting speed: 20 - 100 m/min (steplessly adjustable) • Weight: approx. 800 kg • Includes roller conveyor for 3 meters Lodpfx Aioxxxubefead • Saw blade installed

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Laedpfxjrt Tw Dj Aifed Width: ~4920 mm Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Year of construction: 2022, condition: used, 2022 | Tecmor PF36N EPC | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: TECMOR bender, working condition verified by owner , good condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40935 Equippo" is commonly used when looking up more details online. Ljdpeznfcdsfx Aifsad 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm Laedpfx Aiod Stizjfed -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 Laedpfx Asd S Aqaoifod -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Stroke: 160 mm -Dimensions: 95/95/H515 mm -Weight: 4.5 kg

Condition: new, Complete pneumatic stock. Cylinders. Maintenance units. Various accessories and spare parts. Ljdoxvlk Depfx Aifead

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. Lasdpfszltyfsx Aifsd The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), For sale: Set of 49 vulcanized pulling clamps, plus a 6-inch A2 tapered mandrel. Lasdpfx Aijzh It Eofjd The set is almost new; some of the clamps have never been used. Price excludes VAT.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray. Ledpfjy Tuxzex Aifjad

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, in stock, 12-month warranty, not a solvent oven! - Max. temperature: 250°C - Total steam volume: 20.5 m³ - Usable dimensions (LxWxH): 2300 x 2750 x 2200 mm - Control system: Jumo Imago 500 - Heating capacity: 36 kW - Max. load for the oven cart: 6000 kg, electrically driven - Electric supply and exhaust air dampers: Belimo - Exhaust fan controlled via frequency converter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus rails in front of the oven Ljdsttbf Uopfx Aifjad - Own weight approx. 3,500 kg - Free-standing control cabinet - Documentation included - Electrically tested and supplied with a current DGUV measurement protocol Inspection at our warehouse by appointment. Car bottom furnace, oven, ovens, industrial furnace, convection oven, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, annealing oven, chamber oven, drying cabinet, hardening oven,

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Laedpfx Aoir E E Eeifed Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) Lsdpfx Aju Nfttsifjad *

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, Vitronics Soltec mySelective 6746 Specifications The Vitronics Soltec mySelective 6746 is an inline selective soldering system designed for PCB through-hole soldering applications. Core Specifications | Specification | Details | |-----|----- | | Machine type | Inline selective wave soldering system | | Soldering method | SelectWave single-point selective soldering | | Fluxing system | X-Y MultiFluxer / drop-jet fluxing | | Preheating | Inline preheater | | Conveyor interface | SMEMA compatible | | Programming | Recipe-driven, barcode-capable | | Teaching system | Integrated teach camera | | Power | 3×400/415V, 50/60 Hz | | Electrical load | Max. approx. 29 kVA | | PCB handling | Inline conveyor with gripper transport | | Process capability | Single-point precision soldering | | Optional offline software| Easy Teach 2 with DXF import | | Networking | Traceability / network capable | | Typical industries | Automotive, aerospace, medical, military | Standard Features - SelectWave solder pot - Pressurized flux supply - X-Y fluxer - Inline preheater - Teach camera - SMEMA interface - Barcode verification support - Recipe storage and automatic process selection Optional Features - Dual nozzle SelectWave - Closed-loop preheat control - PCB warpage compensation - Advanced solder drainage conditioner (SDC) - Advanced process viewing camera - Easy Teach 2 offline programming Mechanical / Process Notes Laedpfsy Stx Rex Aifsd The system is optimized for: - High-mix, low-to-medium volume production - Compact footprint for efficient use of floor space - Automated traceability - High-reliability soldering applications The conveyor/gripper system allows for process flexibility, including tilted handling (up to 10° as specified in brochures) for complex solder joints. Typical Standard Configuration (for used-market systems) Many installed systems feature: - 410 × 410 mm inline preheater - 130 µm drop-jet nozzle - Infeed/outfeed conveyors - UPS preparation - CE compliant safety features - Transformer packages (208↔400V)

Condition: ready for operation (used), functionality: fully functional, The Tecma Pack FM1200p Cartoner is an industrial machine dedicated to automatic end-of-line cartoning. It forms, fills, and seals cartons with precision, ensuring optimal standardization of packaging. This makes it ideally suited for food processing environments that require steady throughput and high reliability. With its automated system, the FM1200p ensures continuous production and a constant flow of cartons. It significantly reduces manual handling while increasing overall productivity. As a result, it optimizes end-of-line performance and minimizes human error. Additionally, its gluing system guarantees a clean and secure seal, which is crucial for logistics and transport. This cartoner stands out for its ability to handle various carton sizes while maintaining a consistent speed. It easily integrates with conveyors, filling machines, or palletizing systems. Its robust design allows for continuous operation in demanding industrial settings. The Tecma Pack FM1200p Cartoner is a strategic solution for automating packaging while controlling costs. As a refurbished piece of equipment, it delivers high performance at an optimized investment. Technical Specifications: - Output: 1,200 cartons/hour - Machine power: 2 kW - Gluing unit power: 4 kW - Air consumption: 7 m³/h - Air pressure: 6 bar - Gluing system: hot melt - Control: programmable logic controller (PLC) - Weight: 1,000 kg - Dimensions (L × W × H): 3,950 × 1,860 × 2,250 mm --- ❓ What should you check before investing in the FM1200p? What is the actual output of this cartoner? It reaches 1,200 cartons per hour, supporting continuous industrial production. Is the gluing system reliable for transport? Yes, the hot melt gluing system provides strong and consistent carton sealing. Can it be easily integrated into an existing line? Yes, it is designed to operate at the end of the production line with conveyors and palletizing systems. What types of cartons can it handle? It supports various formats, offering great production flexibility. Lajdpoy Nxnlsfx Aifjd

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price. Lajdpsx Apntefx Aifed

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. Lajdpfx Aijx Apg Aefsd VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: used, Year of construction: 2000, functionality: fully functional, Tunnel originally supplied by Nodema to the customer from whom we took it back in exchange. Inspected by Nodema. Lodjylnr Depfx Aifsad